NHD-320240WX-COTFH-V#I040

User’s Guide
NHD-320240WX-COTFH-V#I040
LCM
(Liquid Crystal Display Graphic Module)
RoHS Compliant
NHD320240WXCOTFHV#I040-
Newhaven Display
320 x 240 Dots
W= V ersion Line X=Display Type- Tab Type
Model/ Serial Number
White LED B/L
FS TN (+)
Transflective, 6:00 View,Wide Temperature (-20 ~ +70c)
With Built in Positive Voltage, #: RoHS Compliant
I: ICIST3031TA0# ICIST3032TA0#
; 04Sales code 0: Version SGX320240CEV#002
For product support, contact
Newhaven Display International
2511 Technology Drive, #101
Elgin, IL 60124
Tel: (847) 844-8795 Fax: (847) 844-8796
February 18, 2009
RECORDS OF REVISION
VERSION
0
A
DATE
2008/3/12
2008.5.13
REVISED
PAGE NO.
DOC. FIRST ISSUE
SUMMARY
First issue
Modify Contour Drawing
Contents
1.Module classification information
2.Precautions in Use of LCM
3.General Specification
4.Absolute Maximum Ratings
5.Electrical Characteristics
6.Optical Characteristics
7.Power Supply for LCD Module
8.Contour Drawing & Block Diagram
9.Interface Pin Function
10.Timing Characteristics
11.Reliability
12. Backlight Information
13. Inspection specification
14. Material List of Components for RoHs
Page 3 of 22
10(A)
3
1.Module Classification Information
ġ ġ NHD 320240
Wġ X 炼 C0 T F H – V#I040
ġ ġ c
e
d
f
ghij
9
c Brand烉Newhaven Display
d Display Font烉320 * 240 Dots
e Factory Line: W
f Display Type烉HɦCharacter Type, GɦGraphic Type, Cɦ Color, XɦTab Type
g Model / Serial number: C0 Æ With RA8835 Controller
h Backlight Type烉
NɦWithout backlight
TɦWhite LED
BɦEL, Blue green
AɦLED, Amber
DɦEL, Green
RɦLED, Red
WɦEL, White
OɦLED, Orange
FɦCCFL, White
GɦLED, Green
YɦLED, Yellow Green
i LCD Mode烉
BɦTN Positive, Gray
TɦFSTN Negative
NɦTN Negative,
YɦSTN Positive, Yellow Green
GɦSTN Positive, Gray
MɦSTN Negative, Blue
FɦFSTN Positive
j LCD Polarize Type/ AɦReflective, N.T, 6:00
Temperature range/ DɦReflective, N.T, 12:00
View direction
GɦReflective, W. T, 6:00
HɦTransflective, W.T,6:00
JɦReflective, W. T, 12:00
FɦTransmissive, N.T,12:00
BɦTransflective, N.T,6:00
IɦTransmissive, W. T, 6:00
EɦTransflective, N.T.12:00
LɦTransmissive, W.T,12:00
9 Special Code
KɦTransflective, W.T,12:00
CɦTransmissive, N.T,6:00
#: RoHS ; V: Built in Positive Voltage ;
I: ICIST3031TA0# ICIST3032TA0
04: Sales Code
0: VersionSGX320240CEV#002
Newhaven Display International, LLC
NHD-320240WX-C0TFH-V#I040
2.Precautions in Use of LCD Module
(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of
LCD Module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.
(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
(8)Winstar have the right to change the passive components
(9)Winstar have the right to change the PCB Rev.
3.General Specification
ITEM
STANDARD VALUE
UNIT
Number of dots
320x240
dots
Outline dimension
94.7(W)x 71.7(H)x 8.6max(T)
View area
81.4(W) x 61.0(H)
mm
Active area
76.78(W)x 57.58(H)
mm
Dot size
0.225(W)x 0.225(H)
mm
Dot pitch
0.24(W)x 0.24(H)
mm
LCD type
FSTN Positive
mm
Transflective,
View direction
6 o’clock
Backlight
LED, White
Page 5 of 22
10(A)
4.Absolute Maximum Ratings
ITEM
SYMBOL MIN.
TYP.
MAX.
UNIT
Operating Temperature
TOP
-20
Ё
+70
к
Storage Temperature
TST
-30
Ё
+80
к
Input Voltage
VI
0
Ё
VDD
V
Supply Voltage For Logic
VDD
0
Ё
3.5
V
Supply Voltage For LCD
Vo-VSS
0
Ё
30
V
DC-DC converter output
VEE
23
5.Electrical Characteristics
ITEM
Logic Voltage
SYMBOL
CONDITION
MIN.
TYP.
MAX.
UNIT
VDD-VSS
Ё
3.0
3.3
3.6
V
Ta= -20к
Ё
Ё
22.5
V
Ta=25к
Ё
18.7
Ё
V
Ta=+70к
12.2
Ё
Ё
V
Supply Voltage For
LCD
Vo-VSS
Input High Volt.
VIH
Ё
0.5VDD
Ё
VDD
V
Input Low Volt.
VIL
Ё
VSS
Ё
0.2VDD
V
Output High Volt.
VOH
Ё
2.4
Ё
Ё
V
Output Low Volt.
VOL
Ё
Ё
Ё
0.4
V
Supply Current
IDD
Ё
20.0
30.0
50.0
mA
Page 6 of 22
10(A)
6.Optical Characteristics
ITEM
SYMBAL
CONDITION
MIN
TYP
MAX
UNIT
(V)Ӱ
CRЊ2
30
Ё
60
deg.
(H)ӽ
CRЊ2
-45
Ё
45
deg.
CR
Ё
Ё
5
Ё
Ё
T rise
Ё
Ё
200
300
ms
T fall
Ё
Ё
150
200
ms
View Angle
Contrast Ratio
Response Time
6.1ʳ Definitions
ϮView Anglesʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ϮContrast Ratio
( Visual angle direction )
Brightness at selected state ( BS )
Brightness at non-selected state ( Bns )
Selected state
CR =
͝
X
Brightness (%)
Z
Non-selected state
Bs
Bns
Y
Ӱ
Operating voltage for LCD driving
ʳ ϮResponse time
Selected Condition
Nonselected Condition
90 %
100 %
Brightness
Nonselected Condition
10 %
tr
td
Rise Time
Decay Time ( fall time tf )
Page 7 of 22
10(A)
WS-
7.Power Supply for LCD Module
V SS
V0
VR 10K Ө
LCM
3.3V
V EE
+28V
V DD
Page 8 of 22
10(A)
8.Contour Drawing & Block diagram
94.7
93.8
81.4(VA)
76.78(AA)
CON2
8.6MAX
47.05
5.6
36.7
57.58(AA)
71.7
70.3
61.0(VA)
320*240 dots
38.1
36.7
1
3.75
21.0
P1.0*21
CON2
22
A
17.1
1
14.3
CN-FPC-22P/P1.0
(Down-Side)
0.24
0.225
VSS
VDD
VO
A0
WR
RD
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
CS
RES
VEE+
SEL1
A
K
DIOFF
BUSY
0.24
0.225
The non-specified tolerance of dimension is ±0.2 mm .
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
DOTS SIZE
DETAIL
Driver
Power ON
Reset
Com161~240
32K
SRAM
Driver
MPU
Com81~160
Controller
Com1~80
RA8835
Driver
CL1
M
FLM
RD
WR
A0
DB0~DB7
CS
RES
320X240 DOT
Vss
VR
20K
Vo
Internal contrast adjustment.
Bias and
Power Circuit
*
Vdd
N.V.
Generator
Seg1~80
Seg81~160
Seg161~240
Seg241~320
Driver
Driver
Driver
Driver
CL2
DB0~DB3
Frame PAD
*:6800 family or 8080family interface selectable.
Page 9 of 21
10(A)
FGND
WS-EP-008
9.Interface Pin Function
Pin No.
Symbol
Level
Description
1
VSS
Ground
2
VDD
Power supply for Logic
3
VO
4
A0
H/L
5
WR
H
8080 family: Write signal, 6800 family: Enable clock
6
RD
L
8080 family: Read signal, 6800 family: R/W signal
7
DB0
H/L
DB0 Data bus line
8
DB1
H
DB1 Data bus line
9
DB2
H/L
DB2 Data bus line
10
DB3
H/L
DB3 Data bus line
11
DB4
H/L
DB4 Data bus line
12
DB5
H
DB5 Data bus line
13
DB6
H/L
DB6 Data bus line
14
DB7
H/L
DB7 Data bus line
15
CS
H/L
Chip Enable
16
RES
H/L
Reset
17
VEE
18
SEL1
19
A
Power supply for B/L
20
K
Power supply for B/L
21
DIOFF
DISPOFF
22
BUSY
BUSY
(Variable) Operation voltage LCD driving
H:Data L:Instruction
Positive voltage output
H/L
8080 OR 6800 Family Interface Select ; H:68xx , L:80xx
Page 11 of 22
10(A)
10. Timing Characteristics
PLEASE TO CONSUL RA8835 SPEC
Page 12 of 22
10(A)
11.RELIABILITY
Content of Reliability Test (wide temperature, -20к~70к)
Environmental Test
Test Item
High Temperature
storage
Low Temperature
storage
High Temperature
Operation
Low Temperature
Operation
High Temperature/
Humidity Operation
Thermal shock
resistance
Content of Test
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to the
element for a long time.
Endurance test applying the electric stress under
low temperature for a long time.
The module should be allowed to stand at 60
к,90%RH max
For 96hrs under no-load condition excluding the
polarizer,
Then taking it out and drying it at normal
temperature.
The sample should be allowed stand the
following 10 cycles of operation
-20к
25к
70к
30min
5min
1 cycle
Test Condition
80к
200hrs
-30к
200hrs
Note
2
1,2
70к
200hrs
——
-20к
200hrs
1
60к,90%RH
96hrs
-20к/70к
10 cycles
1,2
——
30min
Total fixed
amplitude :
1.5mm
Vibration
Frequency :
Endurance test applying the vibration during
Vibration test
10~55Hz
3
transportation and using.
One cycle 60
seconds to 3
directions of X,Y,Z
for
Each
15 minutes
VS=800V,RS=1.5k
Endurance test applying the electric stress to the Ө
Static electricity test
——
terminal.
CS=100pF
1 time
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after remove from the test chamber.
Note3: Vibration test will be conducted to the product itself without putting it in a container.
Page 13 of 22
10(A)
12. Backlight Information
Specification
PARAMETER SYMBOL
MIN
TYP
MAX
UNIT
TESTʳ
CONDITION
V=3.5V
Supply Current
ILED
100
120
180
mA
Supply Voltage
V
3.4
3.5
3.6
V
Reverse Voltage
VR
Ё
Ё
5
V
Luminous
Intensity
IV
160
200
Ё
CD/M2
ILED=120mA
Ё
50K
Ё
Hr.
ILEDЉ120mA
Life Time
Color
white
Note: The LED of B/L is drive by current only, drive voltage is for reference only.
drive voltage can make driving current under safety area (current between
minimum and maximum)
Drive from pin19,pin20
pin19
pin20
R
R
A
K
B/L
LCM
Page 14 of 22
10(A)
13. Inspection specification
NO
01
02
03
04
Item
Criterion
AQL
Electrical
Testing
1.1 Missing vertical, horizontal segment, segment contrast defect.
1.2 Missing character , dot or icon.
1.3 Display malfunction.
1.4 No function or no display.
1.5 Current consumption exceeds product specifications.
1.6 LCD viewing angle defect.
1.7 Mixed product types.
1.8 Contrast defect.
0.65
Black or white
2.1 White and black spots on display Љ0.25mm, no more than
spots on
LCD
three white or black spots present.
(display
2.2 Densely spaced: No more than two spots or lines within 3mm
only)
3.1 Round type : As following drawing
ӥːʻʳ̋ʳʾʳ̌ʳʼʳ˂ʳ˅ʳ ʳ ʳ ʳ
˦˜˭˘ʳ
˔˶˶˸̃̇˴˵˿˸ʳˤʳ˧ˬʳ
ʳ ʳ ʳ ʳ ʳ ӥЉ˃ˁ˄˃ ˔˶˶˸̃̇ʳ́̂ʳ˷˸́̆˸ʳ
˃ˁ˄˃ІӥЉ˃ˁ˅˃
˅ʳ
˃ˁ˅˃ІӥЉ˃ˁ˅ˈ
˄ʳ
˃ˁ˅ˈІӥʳ
˃ʳ
ʳ
LCD black
spots, white
spots,
contaminati
on
3.2 Line type : (As following drawing)
(non-display
Length
Width
)
--WЉ˃ˁ˃˅
LЉˆˁ˃ 0.02ІWЉ˃ˁ˃ˆ
LЉ˅ˁˈ 0.03ІWЉ˃ˁ˃ˈʳ
--0.05ІW
Polarizer
bubbles
If bubbles are visible,
judge using black spot
specifications, not easy
to find, must check in
specify direction.
10(A)
2.5
Acceptable Q TY
Accept no dense
2.5
2
As round type
Acceptable Q TY
Size ӥ
ӥЉ˃ˁ˅˃ Accept no dense
3
˃ˁ˅˃ІӥЉ˃ˁˈ˃
2
˃ˁˈ˃ІӥЉ˄ˁ˃˃
0
˄ˁ˃˃Іӥ
Total Q TY
3
Page 15 of 22
2.5
2.5
NO
05
Item
Scratches
Criterion
Follow NO.3 LCD black spots, white spots, contamination
AQL
Symbols Define:
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: LCD side length
L: Electrode pad length:
6.1 General glass chip :
6.1.1 Chip on panel surface and crack between panels:
06
Chipped
glass
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
˭Љ˄˂˅̇ʳ
ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴
̋Љ˄˂ˋ˴ʳ
˄˂˅̇І̍Љ˅̇ʳ
ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ
̋Љ˄˂ˋ˴ʳ
Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ
ʳ
ˉˁ˄ˁ˅ʳ˖̂̅́˸̅ʳ˶̅˴˶˾ˍʳ
2.5
ʳ
ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
˭Љ˄˂˅̇ʳ
ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴
̋Љ˄˂ˋ˴ʳ
˄˂˅̇І̍Љ˅̇ʳ
ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ
̋Љ˄˂ˋ˴ʳ
Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇˻˸ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ
ʳ
NO
Item
Criterion
Page 16 of 22
10(A)
AQL
˦̌̀˵̂˿̆ʳˍʳ
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: LCD side length
L: Electrode pad length
6.2 Protrusion over terminal :
6.2.1 Chip on electrode pad :
06
NO
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌Љ˃ˁˈ̀̀ʳ
̋Љ˄˂ˋ˴ʳ
˃ʳ Іʳ ̍ʳ Љʳ ̇ʳ
ˉˁ˅ˁ˅ʳˡ̂́ˀ˶̂́˷̈˶̇˼̉˸ʳ̃̂̅̇˼̂́ˍʳ
ʳ
Glass crack
2.5
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌Љʳ ˟ʳ
̋Љ˄˂ˋ˴ʳ
˃ʳ Іʳ ̍ʳ Љʳ ̇ʳ
Ф˜˹ʳ̇˻˸ʳ˶˻˼̃̃˸˷ʳ˴̅˸˴ʳ̇̂̈˶˻˸̆ʳ̇˻˸ʳ˜˧ˢʳ̇˸̅̀˼́˴˿ʿʳ̂̉˸̅ʳ˅˂ˆʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ
̀̈̆̇ʳ̅˸̀˴˼́ʳ˴́˷ʳ˵˸ʳ˼́̆̃˸˶̇˸˷ʳ˴˶˶̂̅˷˼́˺ʳ̇̂ʳ˸˿˸˶̇̅̂˷˸ʳ̇˸̅̀˼́˴˿ʳ
̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ
Ф˜˹ʳ̇˻˸ʳ̃̅̂˷̈˶̇ʳ̊˼˿˿ʳ˵˸ʳ˻˸˴̇ʳ̆˸˴˿˸˷ʳ˵̌ʳ̇˻˸ʳ˶̈̆̇̂̀˸̅ʿʳ̇˻˸ʳ˴˿˼˺́̀˸́̇ʳ
̀˴̅˾ʳ́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ˁʳ
ˉˁ˅ˁˆʳ˦̈˵̆̇̅˴̇˸ʳ̃̅̂̇̈˵˸̅˴́˶˸ʳ˴́˷ʳ˼́̇˸̅́˴˿ʳ˶̅˴˶˾ˁʳ
ʳ
̌ˍʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˿˸́˺̇˻ʳ
ʳ
̌Љ˄˂ˆ˟ʳ
̋ʳ Љʳ ˴ʳ
Item
Criterion
Page 17 of 22
10(A)
AQL
07
08
09
10
Cracked glass
Backlight
elements
Bezel
PCBΕCOB
˧˻˸ʳ˟˖˗ʳ̊˼̇˻ʳ˸̋̇˸́̆˼̉˸ʳ˶̅˴˶˾ʳ˼̆ʳ́̂̇ʳ˴˶˶˸̃̇˴˵˿˸ˁʳ
ʳ
ˋˁ˄ʳ˜˿˿̈̀˼́˴̇˼̂́ʳ̆̂̈̅˶˸ʳ˹˿˼˶˾˸̅̆ʳ̊˻˸́ʳ˿˼̇ˁʳ
ˋˁ˅ʳ˦̃̂̇̆ʳ̂̅ʳ̆˶̅˴̇˶˻˸˷ʳ̇˻˴̇ʳ˴̃̃˸˴̅ʳ̊˻˸́ʳ˿˼̇ʳ̀̈̆̇ʳ˵˸ʳ˽̈˷˺˸˷ˁʳ˨̆˼́˺ʳ
˟˖˗ʳ̆̃̂̇ʿʳ˿˼́˸̆ʳ˴́˷ʳ˶̂́̇˴̀˼́˴̇˼̂́ʳ̆̇˴́˷˴̅˷̆ˁʳ
ˋˁˆʳ˕˴˶˾˿˼˺˻̇ʳ˷̂˸̆́ϗ̇ʳ˿˼˺˻̇ʳ̂̅ʳ˶̂˿̂̅ʳ̊̅̂́˺ˁʳ
ʳ
ʳ
ˌˁ˄ʳ˕˸̍˸˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̅̈̆̇ʿʳ˵˸ʳ˷˸˹̂̅̀˸˷ʳ̂̅ʳ˻˴̉˸ʳ˹˼́˺˸̅̃̅˼́̇̆ʿʳ
̆̇˴˼́̆ʳ̂̅ʳ̂̇˻˸̅ʳ˶̂́̇˴̀˼́˴̇˼̂́ˁʳ
ˌˁ˅ʳ˕˸̍˸˿ʳ̀̈̆̇ʳ˶̂̀̃˿̌ʳ̊˼̇˻ʳ˽̂˵ʳ̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ
ʳ
˄˃ˁ˄ʳ˖ˢ˕ʳ̆˸˴˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ˿˴̅˺˸̅ʳ̇˻˴́ʳ˃ˁ˅̀̀ʳ̂̅ʳ
˶̂́̇˴̀˼́˴̇˼̂́ˁʳ
˄˃ˁ˅ʳ˖ˢ˕ʳ̆˸˴˿ʳ̆̈̅˹˴˶˸ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ̇˻̅̂̈˺˻ʳ̇̂ʳ̇˻˸ʳ˜˖ˁʳ
˄˃ˁˆʳThe height of the COB should not exceed the height
indicated in the assembly diagram.
10.4 There may not be more than 2mm of sealant outside the
seal area on the PCB. And there should be no more than
three places.
10.5 No oxidation or contamination PCB terminals.
10.6 Parts on PCB must be the same as on the production
characteristic chart. There should be no wrong parts,
missing parts or excess parts.
10.7 The jumper on the PCB should conform to the product
characteristic chart.
10.8 If solder gets on bezel tab pads, LED pad, zebra pad or
screw hold pad, make sure it is smoothed down.
˄˃ˁˌ The Scraping testing standard for Copper Coating of PCB
2.5
0.65
2.5
0.65
2.5
0.65
2.5
2.5
0.65
2.5
2.5
0.65
0.65
2.5
2.5
X
Y
X * Y<=2mm2ʳ
2.5
2.5
11
Soldering
ʳ
2.5
0.65
˄˄ˁ˄ʳˡ̂ʳ̈́ˀ̀˸˿̇˸˷ʳ̆̂˿˷˸̅ʳ̃˴̆̇˸ʳ̀˴̌ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂́ʳ̇˻˸ʳˣ˖˕ˁʳ
˄˄ˁ˅ʳˡ̂ʳ˶̂˿˷ʳ̆̂˿˷˸̅ʳ˽̂˼́̇̆ʿʳ̀˼̆̆˼́˺ʳ̆̂˿˷˸̅ʳ˶̂́́˸˶̇˼̂́̆ʿʳ̂̋˼˷˴̇˼̂́ʳ̂̅ʳ
˼˶˼˶˿˸ˁʳ
˄˄ˁˆʳˡ̂ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳˣ˖˕ˁʳ
˄˄ˁˇʳˡ̂ʳ̆˻̂̅̇ʳ˶˼̅˶̈˼̇̆ʳ˼́ʳ˶̂̀̃̂́˸́̇̆ʳ̂́ʳˣ˖˕ˁʳ
ʳ
Page 18 of 22
10(A)
NO
12
Item
General
appearance
Criterion
ʳ
˄˅ˁ˄ʳˡ̂ʳ̂̋˼˷˴̇˼̂́ʿʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ˶̈̅̉˸̆ʳ̂̅ʿʳ˵˸́˷̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳˣ˼́ʳ
ʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ
˄˅ˁ˅ʳˡ̂ʳ˶̅˴˶˾̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ
˄˅ˁˆʳˡ̂ʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ̆̂˿˷˸̅ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳ̃̅̂˷̈˶̇ˁʳ
˄˅ˁˇʳ˧˻˸ʳ˜˖ʳ̂́ʳ̇˻˸ʳ˧˖ˣʳ̀˴̌ʳ́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ʿʳ˶˼̅˶̈˼̇̆ˁʳ
˄˅ˁˈʳ˧˻˸ʳ̈̃̃˸̅̀̂̆̇ʳ˸˷˺˸ʳ̂˹ʳ̇˻˸ʳ̃̅̂̇˸˶̇˼̉˸ʳ̆̇̅˼̃ʳ̂́ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ
̀̈̆̇ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂̅ʳ˿̂̂˾ʳ˴̆ʳ˼˹ʳ˼̇ʳ˶˴̈̆˸ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ̇̂ʳ̆˸̉˸̅ˁʳ
˄˅ˁˉʳ˧˻˸ʳ̅˸̆˼˷̈˴˿ʳ̅̂̆˼́ʳ̂̅ʳ̇˼́ʳ̂˼˿ʳ̂˹ʳ̆̂˿˷˸̅˼́˺ʳʻ˶̂̀̃̂́˸́̇ʳ̂̅ʳ˶˻˼̃ʳ
˶̂̀̃̂́˸́̇ʼʳ˼̆ʳ́̂̇ʳ˵̈̅́˸˷ʳ˼́̇̂ʳ˵̅̂̊́ʳ̂̅ʳ˵˿˴˶˾ʳ˶̂˿̂̅ˁʳ
˄˅ˁˊʳ˦˸˴˿˴́̇ʳ̂́ʳ̇̂̃ʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ˶˼̅˶̈˼̇ʳ˻˴̆ʳ́̂̇ʳ˻˴̅˷˸́˸˷ˁʳ
˄˅ˁˋʳˣ˼́ʳ̇̌̃˸ʳ̀̈̆̇ʳ̀˴̇˶˻ʳ̇̌̃˸ʳ˼́ʳ̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
˄˅ˁˌʳ˟˖˗ʳ̃˼́ʳ˿̂̂̆˸ʳ̂̅ʳ̀˼̆̆˼́˺ʳ̃˼́̆ˁʳ
˄˅ˁ˄˃ʳˣ̅̂˷̈˶̇ʳ̃˴˶˾˴˺˼́˺ʳ̀̈̆̇ʳ̇˻˸ʳ̆˴̀˸ʳ˴̆ʳ̆̃˸˶˼˹˼˸˷ʳ̂́ʳ̃˴˶˾˴˺˼́˺ʳ
̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
˄˅ˁ˄˄ʳˣ̅̂˷̈˶̇ʳ˷˼̀˸́̆˼̂́ʳ˴́˷ʳ̆̇̅̈˶̇̈̅˸ʳ̀̈̆̇ʳ˶̂́˹̂̅̀ʳ̇̂ʳ̃̅̂˷̈˶̇ʳ
̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
ʳ
14. Material List of Components for RoHs
Page 19 of 22
10(A)
AQL
2.5
0.65
2.5
2.5
2.5
2.5
2.5
0.65
0.65
0.65
0.65
1. Newhaven Display International hereby declares that all of or part of products (with the mark
“#”in code), including, but not limited to, the LCM, accessories or packages, manufactured
and/or delivered to your company (including your subsidiaries and affiliated company)
directly or indirectly by our company (including our subsidiaries or affiliated companies) do
not intentionally contain any of the substances listed in all applicable EU directives and
regulations, including the following substances.
Exhibit AΚThe Harmful Material List
Material
(Cd)
(Pb)
(Hg)
(Cr6+)
PBBs
PBDEs
Limited
100
1000
1000
1000
1000
1000
Value
ppm
ppm
ppm
ppm
ppm
ppm
Above limited value is set up according to RoHS.
2.Process for RoHS requirementΚ
(1) Use the Sn/Ag/Cu soldering surfaceΙthe surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.Κ
ReflowΚ250к,30 seconds Max.Ι
Connector soldering wave or hand solderingΚ320к, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.Κ235±5кΙ
Recommended customer’s soldering temp. of connectorΚ280к, 3 seconds.
Newhaven LCM Sample Estimate Feedback Sheet
Page 20 of 22
10(A)
Module NumberΚ
1ΕPanel SpecificationΚ
Panel TypeΚ
1.
Page: 1
ϭ Pass
ϭ NG ,
2.
View DirectionΚ
ϭ Pass
ϭ NG ,
3.
Numbers of DotsΚ
ϭ Pass
ϭ NG ,
4.
View AreaΚ
ϭ Pass
ϭ NG ,
5.
Active AreaΚ
ϭ Pass
ϭ NG ,
6.
Operating TemperatureΚ ϭ Pass
ϭ NG ,
7.
Storage TemperatureΚ
ϭ Pass
ϭ NG ,
8.
OthersΚ
2ΕMechanical SpecificationΚ
1.
PCB SizeΚ
ϭ Pass
ϭ NG ,
2.
Frame SizeΚ
ϭ Pass
ϭ NG ,
3.
Materal of FrameΚ
ϭ Pass
ϭ NG ,
4.
Connector PositionΚ
ϭ Pass
ϭ NG ,
5.
Fix Hole PositionΚ
ϭ Pass
ϭ NG ,
6.
Backlight PositionΚ
ϭ Pass
ϭ NG ,
7.
Thickness of PCBΚ
ϭ Pass
ϭ NG ,
8.
Height of Frame to PCBΚ ϭ Pass
ϭ NG ,
9.
Height of ModuleΚ
ϭ Pass
ϭ NG ,
10.
OthersΚ
ϭ Pass
ϭ NG ,
3ΕRelative Hole SizeΚ
1.
Pitch of ConnectorΚ
ϭ Pass
ϭ NG ,
2.
Hole size of ConnectorΚ
ϭ Pass
ϭ NG ,
3.
Mounting Hole sizeΚ
ϭ Pass
ϭ NG ,
4.
Mounting Hole TypeΚ
ϭ Pass
ϭ NG ,
5. OthersΚ
4ΕBacklight SpecificationΚ
ϭ Pass
ϭ NG ,
1.
B/L TypeΚ
ϭ Pass
ϭ NG ,
2.
B/L ColorΚ
ϭ Pass
ϭ NG ,
3.
B/L Driving Voltage (Reference for LED Type)Κϭ Pass
4.
B/L Driving CurrentΚ
ϭ Pass
ϭ NG ,
5.
Brightness of B/LΚ
ϭ Pass
ϭ NG ,
6.
B/L Solder MethodΚ
ϭ Pass
ϭ NG ,
7.
OthersΚ
ϭ Pass
ϭ NG ,
ϭ NG ,
ЇЇ Go to page 2 ІІ
Newhaven
Module NumberΚ
Page: 2
Page 21 of 22
10(A)
5ΕElectronic Characteristics of ModuleΚ
1.
Input VoltageΚ
ϭ Pass
ϭ NG ,
2.
Supply CurrentΚ
ϭ Pass
ϭ NG ,
3.
Driving Voltage for LCDΚ
ϭ Pass
ϭ NG ,
4.
Contrast for LCDΚ
ϭ Pass
ϭ NG ,
5.
B/L Driving MethodΚ
ϭ Pass
ϭ NG ,
6.
Negative Voltage OutputΚ
ϭ Pass
ϭ NG ,
7.
Interface FunctionΚ
ϭ Pass
ϭ NG ,
8.
LCD UniformityΚ
ϭ Pass
ϭ NG ,
9.
ESD testΚ
ϭ Pass
ϭ NG ,
OthersΚ
ϭ Pass
ϭ NG ,
10.
6ΕSummaryΚ
Sales signatureΚ
Customer SignatureΚ
DateΚ
Page 22 of 22
10(A)
/
/