IC PROTECTORS (ICP) Description: The IC Protector (ICP) is an overcurrent protection device having stable and high-speed circuit tripping characteristics which enables these devices to shut off the circuit quickly and safely. This quick shut-off response protects valuable semi‐ conductor devices and circuits from common load short-circuit failures. Features: w Precise and extremely stable cut-off characteristics w Small internal resistance with low voltage drop w Nonflammable w Compact Applications: w Overcurrent protection NTE Type Number Diagram Number Case Style Maximum Rated Voltage (Volts) Maximum Rated Current (Amps) Typical Internal Resistance (Ω) Operating Temperature (°C) Storage Temperature (°C) Topr Tstg 15005E 480 “F” Type 50 0.4 0.220 -55 to +125 -55 to +125 15006E 480 “F” Type 50 0.6 0.135 -55 to +125 -55 to +125 15007E 480 “F” Type 50 0.8 0.100 -55 to +125 -55 to +125 15008E 480 “F” Type 50 1.0 0.070 -55 to +125 -55 to +125 15009E 480 “F” Type 50 1.5 0.042 -55 to +125 -55 to +125 15019E 481 “N” Type 50 0.25 0.350 -55 to +125 -55 to +125 15020E 481 “N” Type 50 0.4 0.220 -55 to +125 -55 to +125 15021E 481 “N” Type 50 0.6 0.135 -55 to +125 -55 to +125 15022E 481 “N” Type 50 0.8 0.100 -55 to +125 -55 to +125 15023E 481 “N” Type 50 1.0 0.070 -55 to +125 -55 to +125 Diagram 480 Diagram 481 .276 (7.0) Max .200 (5.08) .102 (2.6) Max .500 (12.7) Min .129 (3.3) Min .022 (0.55) .200 (5.08) .200 (5.08) Max .142 (3.6) Max .025 (0.65) Diagram 481 (alt.) .200 (5.08) Max .019 (0.50) (2 Leads) .500 (12.7) Min .019 (0.50) (2 Leads) .017 (0.45) .051 (1.3) .100 (2.54) .197 (5.00) .200 (5.08) “F” Type 1-142 “N” Type NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 • http://www.nteinc.com