Layout 11 - NTE Electronics

Whatever your needs, NTE has the answer!
ECG Aerosol Chemicals
• Butane Fuel
• Smoke Detector Tester Spray
• Antistatic Circuit Refrigerants
• Electronics Degreasers and Washes
• Electronics Contact Cleaners,
Degreasers and Washes
• Electronics Contact Cleaners
with Lubes
• Heavy-Duty Flux Removers
• Jet Air Cleaners
• Heavy-Duty Cleaning Solvents
• Electronics Washes
• Hydroentangled Cellulose/
Polyester C-Fold Wipes
• Silicone Lubricants
• Label and Adhesive Removers
• General Duty Defluxers
• Straw Holders
• Computer Glass and
Plastic Cleaner
• CARB Compliant Types
ECG Test Equipment
• Analog Multimeters
• Digital Multimeters
• AC Clamp-On Digital Meters
• AC Clamp-On Current Adapter
• Digital Capacitance Meter
• Battery Tester
• Handheld Digital Thermometer
• Logic Probes
• Oscilloscope Probes
• Test Leads
• Digital Infrared Thermometer
ECG Butane/Electric Soldering
and Heat Products
• Butane Fuel
• Butane Soldering Irons
• Butane Heat Guns
• Butane Torch
• Electric Corded Soldering Irons
• Electric De-soldering Irons
• Tips and Accessories
• Soldering Iron Kits
• Soldering Guns
• Industrial Heat Guns
• Economy Heat Guns
NTE Capacitors
• Aluminum Electrolytic
• Ceramic Disc
• Tantalum
• Mylar/Polyester Film
• Motor Start/Run
• Ceiling Fan
• Snap-in Mount
• Surface Mount Types
• Multilayer (Monolithic) Ceramic
• Prepackaged Kits
ECG LED Flashlights
• Emerge ‘N See Wind Up Flashlight
• LED Flashlight with
14 Super Bright LEDs
ECG Rotors
• Precision Cut Steel Gears
• Rugged One-Piece
Cast Aluminum Housing
• Large Bearing Surface;
Strong Reinforced Mast
• High Torque
• Automatic Control
• Remote Control
Programmable Version
ECG Surge Suppressor
Outlet Strips
• Plug-in Protection for Office,
Industrial, Institutional and
Residential Applications
• Multi-Outlet Combinations
• Steel or Plastic Case
• Optional Phone-Line Protection
• General Purpose Protector
• Optional EMF/RFI Noise Filter
• Single and 3 Mode Protection
• 90° Rotated Outlets to
Accommodate External
Power Supplies
• Some with 15' Cords
NTE Cable Ties
• Standard Cable Ties
• Specialty Cable Ties
• Cable Tie Tension Tools
• Cable Tie Accessories
• Convenience Packs
• Split Loom
• Assorted Sizes & Colors
NTE Fuses
• Tube Type Case Sizes
3.6 x 10mm / 5 x 20mm / 6 x 30mm
• Glass and Ceramic
• Fast and Slow Blow
• Standard and Mini Automotive
Blade Series
• Fuse Clips
* Panel Mount Holders
Worldwide supplier of high quality electronic components
NTE Heat Shrink Tubing
• Assortment Packs Available
• Thin Wall Cross-Linked Polyolefin
• Dual Wall Cross-Linked Polyolefin
with Adhesive
• Medium Wall with Adhesive
• Thick Wall with Adhesive
• Available in 7 Colors
• Shrink Temperature: 120°C
• Shrink Ratio: 2:1Thin/3:1 Dual
• Cut / Marked Service
NTE Hook-Up Wire
• Automotive Wire
• 300V and 600V Solid
and Stranded Wire
• Teflon® Coated Wire
• Speaker Wire Clear
• Black/Red Bonded Speaker Wire
• 10 Colors and Gauges from 10 to 26
• New High Performance Home Audio
Speaker Cable
• Audio Speaker Cable
NTE LED Tubing
• For Interior Lighting
• Super Bright LEDs
• Blue, Green, Red, White, Amber,
Multi
• Flexible
• Connectible - Up to 15 Tubes
NTE Relays
• Electromechanical
• Solid State
• Automotive Type
• Reed
• Time Delay
• I/O Modules
• Thermal Circuit Breakers
• Magnetic Latching
• Accessories
• Surface Mount Types
• Replacements for
Over 83,400 Types
• Proximity Switches
NTE Resistors
• Flameproof 1/8W to 3W
• Power Wirewound 5W/10W/25W
• Fusible Power Oxide 1W/2W
• Prepackaged Kits
• Surface Mount Wirewound
up to 4 Watt
• Metal Clad Aluminum
Precision Wirewound
• 1% Metal Film
• Fixed & Adjustable Vitreous
from 12 to 300 Watt
• Round Silicone Wirewound Ceramic
from 1 to 10 Watt
NTE Semiconductors
• Super Bright LEDs
• Power Block/Hybrid Mod.
• Industrial Rectifiers/Bridges
• Small Signal/Power Transistors
• Voltage Regulators
• Transient Suppressors
• Thermal Cutoffs
• Thyristors
• Zener Diodes
• Integrated Circuits
• Surface Mount Types
• Replacements for Almost 400,000
Industry Types
FUSES
And other circuit protection devices
• Polymeric PTC Resettable Fuses
• Gas Filled Surge Arresters
• Integrated Circuit Protectors
• Thermal Cut-Offs
• Metal Oxide Varistors
• Overvoltage Transient Suppressors
• SIDACS
• Thermal Circuit Breakers
NTE Switches
• Bat Handle
• Toggle and Mini-toggle
• Paddle
• Rocker
• Metal and Nylon Pushbutton
• Snap Action
• Sealed Automotive/Marine Types
• Anti-vandal
• Round Hole Rocker
• Pull Chain
• Waterproof
For more information,
call 973-748-5089 or
visit www.nteinc.com
NTE Electronics, Inc., 44 Farrand Street, Bloomfield, NJ 07003-2597
Fax: 973-748-6224 © Copyright July 2008
Distributed By:
EL74-01
Compliant product now
available on most items.
Now part of the NTE family
1ST EDITION
www.nteinc.com
SEMICONDUCTORS
Fuses and other circuit protection devices
INTRODUCTION
RELAYS
POTENTIOMETERS
RESISTORS
Extensive New Fuse Line!
Technical Guide:
AUTO
NTE is pleased to present the
1st edition of their Fuse Technical
Guide. This Technical Guide is
designed to give engineers,
technicians and buyers assistance
in selecting the NTE component
best suited for their specific
application or circuit.
GLASS
MINI AUTO
SWITCHES
SOLDER IRON TIPS
• Technical specifications should
be consulted to assure the
proper replacement has been
identified
• ”TYPICAL“ parameters can and
do vary in different applications
BLOCK
CERAMIC
• All operating parameters,
including ”TYPICALS,“ must be
validated for each application
by customers’ technical experts
• NTE reserves the right to make
any changes without further
notice to any product herein
HOLDERS
CLIPS
Find all the critical
electronic components you need...
...in a heartbeat!
To order call us at: 973-748-5089 or fax: 973-748-6224 or visit www.nteinc.com
Cross reference over 500,000 industry parts at nteinc.com
WARRANTY
2 Year Warranty: NTE products are warranted to be free from
defects in materials and workmanship and meet applicable
specifications when tested to ratings. This warranty is in lieu of
any other warranty expressed, implied, or statutory. NTE’s liability
under this warranty is limited to repairing, replacing, or issuing
credit (at the discretion of NTE) for such products that become
defective or fail to meet specification during the warranty period
of two years from the date of sale. The technical data shown is
intended to provide safe areas of operation for NTE products.
Determination as to whether a product is actually defective rests
with NTE. In no event will NTE be liable for consequential or
special damages.
EL74-01 © Copyright July 2008 by NTE Electronics, Inc.
“All Rights Reserved” Printed in USA
ECG® is a registered trademark of NTE Electronics, Inc.
NTE® is a registered trademark of NTE Electronics, Inc.
Technical Assistance: For further detailed product information first
check out our web site at www.nteinc.com. If the information you
need is not there, or you don’t have internet access, you may also
call us at 973-748-5089 or fax us at 973-748-6224.
Safety Warning: NTE devices are not to be used as critical
components in life support equipment. Testing of solid state
devices should be performed by experienced personnel using test
instruments specifically designed for such purposes.
For over 25 years NTE has been your “go-to” supplier for high
quality electronic components. From relays to resistors, semi’s to
switches and heat shrink tubing to hook up wire, NTE helps you
find the parts you need on the Web with our massive database and
exclusive QuickCross™ cross reference system. Plus with our global
network of distributors you’ll have the parts you need in no time.
Visit our Web site today to see for yourself.
www.nteinc.com
CONTENTS
FUSES
Page No.
3.6 x 10mm Micro Glass
Fast Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Slow Blow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
5 x 20mm Miniature Glass
Fast Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Slow Blow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
5 x 20mm Miniature Ceramic
Fast Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Slow Blow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
3AG Equivalent (6 x 30mm) Miniature Glass
Fast Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Slow Blow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
3AB Equivalent (6 x 30mm) Miniature Ceramic
Fast Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Slow Blow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
Automotive, Low Voltage, Fast Acting
ATM Equivalent Miniature Blade Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ATC Equivalent Clip Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
3
3
4
4
5
5
6
6
7
7
OTHER CIRCUIT PROTECTION DEVICES
Page No.
FUSE KITS
Page No.
FUSE ACCESSORIES
Page No.
Thermal Circuit Breaker
R58 Series Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 13
R59 Series Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 14
Thermal Cut Off (TCO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 15
Metal Oxide Varistor (MOV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 16−17
IC Protector (ICP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 18
Overvoltage Transient Suppressor
Unidirectional (DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 19−20
Bidirectional (AC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 21−22
Polymeric PTC Resettable Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24−26
Surge Arresters, Gas Filled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 27
SIDAC − Bidirectional Thyristor Diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5 x 20mm Glass Fuse Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 12
3AG Equivalent 6 x 30mm Glass Fuse Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automotive Fuse Kit (Contains ATC and ATM Equivalent Types) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fuse Clips
For 3.6 x 10mm Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 8
For 5 x 20mm Types, Double Fluted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
For 6 x 30mm (3AG Equivalent) Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Fuse Block w/Clear Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 9
Fuse Holders (Panel Mount & In−Line Types)
For 5 x 20mm Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 10
For 6 x 30mm (3AG Equivalent) & 6.3 x 32mm Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
1
3.6 x 10mm Glass Microfuse, Fast Acting
Specifications
Features
RoHS Compliant
F−01
Rated Voltage: 125V / 250V
Breaking Capacity: 125VAC, 50A; 250VAC, 50A
Time Current Characteristics:
% of Ampere Rating
Opening Time
110%
4 hours min.
150%
10 minutes max.
200%
5 seconds max.
.394 (10.0)
.142
(3.6)
Ordering Information:
NTE Type No. (Note 1)
74−3FG100MA
74−3FG125MA
74−3FG1A
74−3FG2A
74−3FG2.5A
74−3FG4A
74−3FG5A
Rated Current
100mA
125mA
1.0A
2.0A
2.5A
4.0A
5.0A
Diag No.
F−01
F−01
F−01
F−01
F−01
F−01
F−01
3.6 x 10mm Glass Microfuse, Slow Blow
Specifications
Features
RoHS Compliant
F−01
Rated Voltage: 125V / 250V
Breaking Capacity: 125VAC, 50A; 250VAC, 50A
Time Current Characteristics:
% of Ampere Rating
Opening Time
110%
4 hours min.
150%
10 minutes max.
200%
120 seconds max.
.394 (10.0)
.142
(3.6)
2
NTE Electronics, Inc.
Ordering Information:
NTE Type No. (Note 1)
74−3SG500MA
74−3SG800MA
74−3SG1A
74−3SG1.25A
74−3SG2A
74−3SG2.5A
74−3SG4A
74−3SG5A
74−3SG6A
Voice (973) 748−5089
Rated Current
500mA
800mA
1.0A
1.25A
2.0A
2.5A
4.0A
5.0A
6.0A
FAX (973) 748−6224
Diag No.
F−01
F−01
F−01
F−01
F−01
F−01
F−01
F−01
F−01
http://www.nteinc.com
5 x 20mm Miniature Glass
Features
F−02
Available in Fast Acting and Slow Blow Types
RoHS Compliant
.787 (20.0)
.205
(5.2)
Specifications
Rated Voltage: 125V / 250V
Breaking Capacity: 125VAC, 10KA; 250VAC, 20A
Time Current Characteristics:
% of Ampere Rating
Opening Time
110%
4 hours min.
135%
1 hour max.
200%
120 seconds max.
Ordering Information:
NTE Type No.
Fast Acting
Slow Blow
74−5FG100MA
74−5FG125MA
74−5FG160MA
74−5FG200MA
74−5SG200MA **
74−5FG250MA
74−5SG250MA **
74−5SG300MA **
74−5FG315MA
74−5FG400MA
74−5SG400MA **
74−5FG500MA
74−5SG500MA
74−5SG600MA
74−5FG630MA
74−5SG750MA
74−5FG800MA
74−5SG800MA
74−5FG1A
74−5SG1A
74−5FG1.25A
74−5SG1.25A
74−5FG1.6A
74−5SG1.6A
74−5FG2A
74−5SG2A
74−5FG2.5A
74−5SG2.5A
74−5SG3A
74−5FG3.15A
74−5SG3.15A
74−5FG4A
74−5SG4A
74−5FG5A
74−5SG5A
74−5FG6.3A
74−5SG7A
74−5FG8A
74−5FG10A
Rated Current
Diag No.
100mA
125mA
160mA
200mA
250mA
300mA
315mA
400mA
500mA
600mA
630mA
750mA
800mA
1.0A
1.25A
1.6A
2.0A
2.5A
3.0A
3.15A
4.0A
5.0A
6.3A
7.0A
8.0A
10A
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
F−02
** Not UL Approved.
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
3
5 x 20mm Miniature Ceramic
Features
F−03
Available in Fast Acting and Slow Blow Types
RoHS Compliant
.787 (20.0)
.205
(5.2)
Specifications
Rated Voltage: 250V
Breaking Capacity: 250VAC, 1500A
Time Current Characteristics:
Fast Acting
Opening Time
% of Ampere
Rating
100mA to 3.15A
4A to 5A
150%
60 minutes min.
60 minutes min.
210%
30 minutes max.
30 minutes max.
275%
0.1 − 2 seconds
0.1 − 3 seconds
400%
0.03 − 0.3 seconds
0.03 − 0.3 seconds
1000%
0.2 seconds max.
0.2 seconds max.
Slow Blow
% of
Ampere
100mA to 3.15A
Rating
150%
60 minutes min.
210%
30 minutes max.
275%
1 − 80 seconds
400%
0.095 - 5 seconds
1000%
0.01 - 0.1 seconds
Ordering Information:
NTE Type No.
Fast Acting
Slow Blow
74−5FC100MA
74−5FC125MA
74−5FC160MA
74−5FC200MA
74−5SC200MA
74−5FC250MA
74−5SC250MA
74−5FC315MA
74−5SC315MA
74−5FC400MA
74−5SC400MA
74−5FC500MA
74−5SC500MA
74−5FC630MA
74−5SC630MA
74−5FC800MA
74−5SC800MA
74−5FC1A
74−5SC1A
74−5FC1.25A
74−5SC1.25A
74−5FC1.6A
74−5SC1.6A
74−5FC2A
74−5SC2A
74−5FC2.5A
74−5SC2.5A
74−5FC3.15A
74−5SC3.15A
74−5FC4A
74−5SC4A
74−5FC5A
74−5SC5A
74−5SC6.3A
74−5SC8A
74−5SC10A
4
NTE Electronics, Inc.
Rated Current
Diag No.
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.0A
1.25A
1.6A
2.0A
2.5A
3.15A
4.0A
5.0A
6.3A
8.0A
10A
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
F−03
Voice (973) 748−5089
Opening Time
4A to 6.3A
8A to 10A
60 minutes min.
30 minutes max.
1 − 80 seconds
0.15 - 5 seconds
0.02 - 0.1 seconds
60 minutes min.
30 minutes max.
−
0.06 - 5 seconds
0.01 - 0.1 seconds
FAX (973) 748−6224
http://www.nteinc.com
3AG Equivalent − 6 x 30mm
Miniature Glass
Features
F−04
Available in Fast Acting and Slow Blow Types
RoHS Compliant
1.252 (31.8)
.250
(6.35)
.787 (20.0)
Specifications
Rated Voltage: 125V / 250V
Breaking Capacity: 125VAC, 10kA; 250VAC, 200A
Time Current Characteristics:
Fast Acting
% of Ampere Rating
Opening Time
110%
4 hours min.
135%
1 hour max.
200%
120 seconds max.
Slow Blow
% of Ampere
Rating
110%
135%
200%
Ordering Information:
NTE Type No.
Fast Acting
Slow Blow
74−6FG100MA **
74−6SG100MA
74−6FG125MA **
74−6SG125MA
74−6FG150MA **
74−6SG150MA
74−6FG175MA **
74−6SG175MA
74−6FG187MA **
74−6SG187MA
74−6FG200MA **
74−6SG200MA
74−6FG250MA **
74−6SG250MA
74−6FG300MA **
74−6SG300MA
74−6FG375MA **
74−6SG375MA
74−6SG400MA
74−6FG500MA
74−6SG500MA
74−6FG600MA
74−6SG600MA
74−6FG750MA
74−6SG750MA
74−6FG1A
74−6SG1A
74−6FG1.25A
74−6SG1.25A
74−6FG1.5A
74−6SG1.5A
74−6FG1.6A
74−6SG1.6A
74−6FG2A
74−6SG2A
74−6FG2.5A
74−6SG2.5A
74−6FG3A
74−6SG3A
74−6FG4A
74−6SG4A
74−6FG5A
74−6SG5A
74−6FG6A
74−6FG7A
74−6SG7A
74−6FG8A
74−6SG8A
74−6FG10A
74−6SG10A
74−6SG12A
74−6SG15A
74−6SG20A
Rated Current
Diag No.
100mA
125mA
150mA
175mA
187mA
200mA
250mA
300mA
375mA
400mA
500mA
600mA
750mA
1.0A
1.25A
1.5A
1.6A
2.0A
2.5A
3.0A
4.0A
5.0A
6.0A
7.0A
8.0A
10A
12A
15A
20A
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
Opening Time
100mA to 3A
4A to 20A
4 hours min.
1 hour max.
5 − 120 seconds
4 hours min.
1 hour max.
12 − 120 seconds
** Not UL Approved.
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
5
3AB Equivalent − 6 x 30mm
Miniature Ceramic
Features
F−04
Available in Fast Acting and Slow Blow Types
RoHS Compliant
1.252 (31.8)
.250
(6.35)
.787 (20.0)
Specifications
Rated Voltage: 125V / 250V
Breaking Capacity: 125VAC, 10kA; 250VAC, 200A
Time Current Characteristics:
Fast Acting
% of Ampere Rating
Opening Time
110%
4 hours min.
135%
1 hour max.
200%
120 seconds max.
Slow Blow
% of Ampere
Rating
110%
135%
200%
Ordering Information:
NTE Type No.
Fast Acting
Slow Blow
74−6SC100MA
74−6FC125MA
74−6SC125MA
74−6SC150MA
74−6SC175MA
74−6SC187MA
74−6SC200MA
74−6FC250MA
74−6SC250MA
74−6SC300MA
74−6FC375MA
74−6SC375MA
74−6SC400MA
74−6FC500MA
74−6SC500MA
74−6SC600MA
74−6SC700MA
74−6FC750MA
74−6SC750MA
74−6FC1A
74−6SC1A
74−6SC1.25A
74−6SC1.5A
74−6SC1.6A
74−6FC2A
74−6SC2A
74−6SC2.5A
74−6FC3A
74−6SC3A
74−6FC4A
74−6SC4A
74−6FC5A
74−6SC5A
74−6FC6A
74−6SC6.25A
74−6FC7A
74−6SC7A
74−6FC8A
74−6SC8A
74−6FC10A
74−6SC10A
74−6FC12A
74−6SC12A
74−6FC15A
74−6SC15A
74−6FC20A
74−6SC20A
6
NTE Electronics, Inc.
Rated Current
Diag No.
100mA
125mA
150mA
175mA
187mA
200mA
250mA
300mA
375mA
400mA
500mA
600mA
700mA
750mA
1.0A
1.25A
1.5A
1.6A
2.0A
2.5A
3.0A
4.0A
5.0A
6.0A
6.25A
7.0A
8.0A
10A
12A
15A
20A
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
F−04
Voice (973) 748−5089
Opening Time
100mA to 3A
4A to 20A
4 hours min.
1 hour max.
5 − 120 seconds
4 hours min.
1 hour max.
12 − 120 seconds
FAX (973) 748−6224
http://www.nteinc.com
ATM Equivalent − Low Voltage
Miniature Automotive, Fast Acting
Features
F−05
Miniature Blade Type
RoHS Compliant
.433 (11.0)
.150 (3.8)
.362
(9.2)
.657
(16.7)
.138
(3.5)
.098 (2.5)
.295
(7.5)
.043 (1.1)
.031 (0.8)
.413 (10.5)
NTE Type No.
74−MAF5A
74−MAF7.5A
74−MAF10A
74−MAF15A
74−MAF20A
74−MAF25A
74−MAF30A
Rated Current
5A
7.5A
10A
15A
20A
25A
30A
Color Code
Tan
Brown
Red
Blue
Yellow
Natural
Green
Diag No.
F−05
F−05
F−05
F−05
F−05
F−05
F−05
Specifications
Rated Voltage: 32V
Time Current Characteristics:
% of Ampere Rating
110%
135%
200%
300%
Opening Time
4 hours min.
0.75 − 1800 seconds
0.15 − 5 seconds
0.08 seconds max.
ATC Equivalent − Low Voltage
Automotive, Fast Acting
Features
F−06
Fast Acting
Clip, Hold Automotive Type
RoHS Compliant
.760 (19.3)
.207 (5.25)
.494
(12.54)
.750
(19.05)
.150 (3.8)
.263
(6.67)
.027 (0.69)
.206 (5.24)
.461 (11.7)
NTE Type No.
74−AF5A
74−AF7.5A
74−AF10A
74−AF15A
74−AF20A
74−AF25A
74−AF30A
NTE Electronics, Inc.
Rated Current
5A
7.5A
10A
15A
20A
25A
30A
Color Code
Tan
Brown
Red
Blue
Yellow
Natural
Green
Voice (973) 748−5089
Diag No.
F−06
F−06
F−06
F−06
F−06
F−06
F−06
Specifications
Rated Voltage: 32V
Time Current Characteristics:
% of Ampere Rating
110%
135%
200%
300%
FAX (973) 748−6224
http://www.nteinc.com
Opening Time
100 hours min.
1800 seconds max.
5 seconds max.
0.08 seconds max.
7
74−FC3, Fuse Clips
Specifications:
For 3.6 x 10mm Fuse
Contact Resistance: −10M
Rating: 6A / 250VAC
Max
FA−01
.148 (3.76)
.131 (3.33)
.077 (1.95)
.118 (3.0)
.283
(7.2)
.079 (2.0)
.138
(3.5)
.142 (3.6)
.036 (0.92)
.134 (3.4)
74−FC5, Fuse Clips (Double Fluted)
Specifications:
For 5 x 20mm Fuse
Contact Resistance: −10M
Rating: 5A / 250VAC
Max
FA−02
.245 (6.22)
.189 (4.8)
.177 (4.5)
.340
(8.64)
.140
(3.56)
.066 (1.68)
.265 (6.73)
.250 (6.35)
8
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
74−FC6, Fuse Clips
Specifications:
For 6 x 30mm Fuse
Contact Resistance: −10M
Rating: 12A / 250VAC
Max
FA−03
.276 (7.0)
.417
(10.6)
.157
(4.0)
.059 (1.5)
.295 (7.5)
.315 (8.0)
74−FB5, Fuse Block w/Clear Cover
Specifications:
For 5 x 20mm Fuse
PC Mount
Rated for Current up to 10A
FA−04
.945 (24.0)
.728
(18.5)
.539
(13.7)
.209
(5.3)
.177
(4.5)
.886 (22.5)
Clear Plastic Cover
.394 (10.0)
.047 (1.2)
.362 (9.2)
1.063 (27.0)
.384
(9.75)
.579
(14.7)
.157 (4.0)
.031 (0.80)
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
.197 (5.0)
9
74−FH5, Fuse Holder
Specifications:
For 5 x 20mm Fuse
Rating: 10A / 250VAC
Panel Mount
Finger−Grip Fuse Extractor Type Knob
FA−05
.591 (15.0) Dia.
.496 (12.6) Dia.
.335
(8.5)
1.378
(35.0)
.083 (2.1)
.472
(12.0)
.303
(7.7)
.343
(8.7)
M13*10
.059 (1.5) Dia.
(2 Places)
.520 (13.2) Dia.
74−IFH5, In−Line Fuse Holder
Specifications:
For 5 x 20mm Fuse
Rating: 15A / 250VAC, 32VDC
14 AWG Red Wire Leads w/Cut Ends
Finger−Grip Fuse Extractor Type Knob
FA−07
2.114 (53.7)
.689
(17.5)
Dia
.433
(11.0)
Dia
3.500 (88.9) Min
(Lead Length, Both Sides)
10
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
74−FH6, Fuse Holder
Specifications:
For 6 x 30mm & 6.3 x 32mm Fuses
Rating: 10A / 250VAC
Panel Mount
Finger−Grip Fuse Extractor Type Knob
FA−06
.709 (18.0) Dia.
.630 (16.0) Dia.
.425
(10.8)
.528 (13.4)
.600
(15.2)
2.087
(53.0)
M15*10
.600
(15.2)
Dia.
.650
(16.5)
.452 (11.5) Dia.
74−IFH6, In−Line Fuse Holder
Specifications:
For 6 x 30mm Fuse
Rating: 20A / 250VAC, 32VDC
12 AWG Red Wire Leads w/Cut Ends
Finger−Grip Fuse Extractor Type Knob
FA−07
2.114 (53.7)
.689
(17.5)
Dia
.433
(11.0)
Dia
3.500 (88.9) Min
(Lead Length, Both Sides)
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
11
Pre−Packaged Fuse Kits
FUSE KITS
74−5x20Kit
74−3AGKit
74−AutoKit
− 5 x 20mm Glass Fuse Kit
− 3AG Equivalent, 6 x 30mm Glass Fuse Kit
− Automotive Fuse Kit (Contains ATC and ATM Equivalent Types)
Features:
Each kit contains 5 each of selected Fuse types and Accessories
One piece frame is lightweight and virtually unbreakable
Separate compartments for each Fuse/Accessory
RoHS Compliant
5 x 20mm Glass Fuse Kit (Contains 5 of each)
74−5x20Kit
1A, Slow Blow
1.6A, Fast Acting
6.3A, Fast Acting
74−3AGKit
500mA, Slow Blow
4A, Slow Blow
1.5A, Fast Acting
6A, Fast Acting
2A, Slow Blow
2A, Fast Acting
8A, Fast Acting
12
4A, Slow Blow
3.15A, Fast Acting
74-FH5, Fuse Holder
5A, Slow Blow
4A, Fast Acting
74-FC5, Fuse Clip
1A, Fast Acting
5A, Fast Acting
74-FB5, Fuse Block
3AG Equivalent, 6 x 30mm Glass Fuse Kit (Contains 5 of each)
1A, Slow Blow
5A, Slow Blow
2A, Fast Acting
7A, Fast Acting
1.5A, Slow Blow
10A, Slow Blow
2.5A, Fast Acting
8A, Fast Acting
10A, ATC Equivalent
10A, ATM Equivalent
15A, ATC Equivalent
15A, ATM Equivalent
2A, Slow Blow
15A, Slow Blow
3A, Fast Acting
10A, Fast Acting
2.5A, Slow Blow
250mA, Fast Acting
4A, Fast Acting
74-FH6, Fuse Holder
3A, Slow Blow
1A, Fast Acting
5A, Fast Acting
74-FC6, Fuse Clip
Automotive Fuse Kit (Contains 5 of each)
74−AutoKit
5A, ATC Equivalent
5A, ATM Equivalent
3A, Slow Blow
2.5A, Fast Acting
10A, Fast Acting
NTE Electronics, Inc.
20A, ATC Equivalent
20A, ATM Equivalent
Voice (973) 748−5089
25A, ATC Equivalent
25A, ATM Equivalent
FAX (973) 748−6224
30A, ATC Equivalent
30A, ATM Equivalent
http://www.nteinc.com
R58 Series Thermal Circuit Breaker
Features
D40
.250” (6.35mm) Quick Connect Terminals
Cannot be Manually Tripped
Visual Trip Indicator
Push Button to Reset Breaker
.440
(11.18)
.050 (1.27) Max
Closed Position
1.375
(34.93)
.660 (16.76)
.500 (12.7)
.850
(21.59)
.425
(10.8)
1.375
(34.93)
Knurled Nut
Hex Nut
7/16−28 Thread
.312 (7.92)
.078 (1.98)
Current Rating
Amps
NTE Type No.
Typical Resistance
Ohms
R58−1A
1.0
1.35
R58−2A
2.0
0.32
R58−3A
3.0
0.18
R58−4A
4.0
0.10
R58−5A
5.0
0.026
R58−6A
6.0
0.026
R58−7A
7.0
0.020
R58−8A
8.0
0.020
R58−10A
10.0
0.014
R58−12A
12.0
0.010
R58−15A
15.0
0.010
R58−20A
20.0
0.006
R58−25A
25.0
0.005
R58−30A
30.0
0.004
Trip Times
1 to 4 Amp Types
5 to 35 Amp Types
Rated Load
Trip Times
Rated Load
100%
No Trip
100%
No Trip
145%
Trip in 1 Hour
145%
Trip in 1 Hour
200%
10 to 45 Sec.
200%
6.0 to 30 Sec.
400%
3.0 to 14.0 Sec.
400%
1.6 to 4.5 Sec.
600%
1.4 to 7.0 Sec.
600%
0.60 to 1.7 Sec.
800%
0.75 to 4.3 Sec.
800%
0.25 to 0.90 Sec.
1000%
0.50 to 3.4 Sec.
1000%
0.15 to 0.65 Sec.
NTE Electronics, Inc.
Voice (973) 748−5089
Trip Times
Flat
.556
(14.12)
.125 (3.18)
Straight Knurl
24 Pitch
Hex Nut
.625
(15.88)
Knurled Nut
Electrical Specifications
Electrical Characteristics (@ 25 C)
Calibration: Will continuously carry 100% of rating.
May trip between 101% and 144%, but must trip at 145%
of rating at +25 C
Maximum Operating Voltages: 50 VDC; 250 VAC, @ 50/60 Hz
Dielectric Strength: 1500VAC RMS
Resettable Overload Capacity: Ten times rated current
Interrupt Capacity:
2000 Amps at 50 VDC
1000 Amps at 250 VAC
Mechanical Characteristics
Termination: .250 (6.35) Quick Connect Terminals
NOTE: Soldering to terminals is not recommended.
Shock: Withstands to 10 g
Endurance Cycling: Over 1000 cycles at 200% of rated load.
Vibration: Withstands to 10 g at 10 to 55 Hz.
Weight: Less than 1.5 ozs. (42.5 g)
NOTE: 30A devices NOT UL or CSA.
FAX (973) 748−6224
http://www.nteinc.com
13
R59 Series Thermal Circuit Breaker
Features
D41
Replaces Slow Blow Glass Cartridge Fuse
.250” (6.35mm) Quick Connect Terminals
Snap−In Mounting
Visual Trip Indicator
Push Button to Reset Breaker
1.535 (38.99)
Max
.325
(8.26)
Max
.760 (19.31)
Max
.760
(19.31)
Max
.540
(13.72)
Max
.190 (4.83)
.370 (9.4)
.625
(15.88)
Max
.570 − .575
(14.48 − 14.61)
.625 − .635
(15.88 − 16.13)
.625 − .635
(15.88 − 16.13)
.540 − .550
(13.77 − 13.97)
.625 − .635
(15.88 − 16.13)
Recommended Panel Cutouts
Recommended Panel Thickness: .032 − .062 (.813 − 1.574)
Current Rating
Amps
NTE Type No.
Typical Resistance
Ohms
R59−0.25A
0.25
R59−0.5A
0.50
14.0
3.55
R59−1A
1.0
0.89
R59−2A
2.0
0.17
R59−3A
3.0
0.069
R59−4A
4.0
0.043
R59−5A
5.0
0.030
R59−6A
6.0
0.026
R59−7A
7.0
0.017
R59−8A
8.0
0.016
R59−10A
10.0
0.011
R59−12A
12.0
0.009
R59−15A
15.0
0.007
R59−20A
20.0
0.007
Electrical Specifications
Electrical Characteristics (@ 25 C)
Trip Times
0.25 to 2 Amp Types
14
3.0 to 20 Amp Types
Rated Load
Trip Times
Rated Load
100%
No Trip
100%
Trip Times
No Trip
175%
Trip in 1 Hour
135%
Trip in 1 Hour
200%
4.5 to 28.0 Sec.
200%
2.2 to 15.0 Sec.
400%
1.0 to 6.5 Sec.
400%
0.55 to 1.8 Sec.
600%
0.4 to 4.0 Sec.
600%
0.27 to 0.7 Sec.
800%
0.17 to 0.45 Sec.
1000%
0.12 to 0.3 Sec.
NTE Electronics, Inc.
Calibration: Will continuously carry 100% of rating.
0.25 to 2 Amp types:
May trip between 101% and 174%,
but must trip at 175% of rating within one hour at +25 C
3.0 to 20 Amp types:
May trip between 101% and 134%,
but must trip at 135% of rating within one hour at +25 C
Maximum Operating Voltages: 32 VDC; 250 VAC, @ 50/60 Hz
Dielectric Strength: 1500VAC RMS
Resettable Overload Capacity:
0.25 to 2 Amp types:
Six times rated current
3.0 to 20 Amp types:
Ten times rated current
Reset Time:
0.25 to 2 Amp types:
180 seconds max.
3.0 to 20 Amp types:
10 to 60 seconds typ.
Interrupt Capacity: 1000 Amps @ 250 VAC, 50/60 Hz. and 32 VDC
in accordance with UL standard 1077
Mechanical Characteristics
Termination: .250 (6.35) Quick Connect Terminals
NOTE: Soldering to terminals is not recommended.
Mounting: Snaps into panel from front
(See Recommended Panel Cutouts)
Weight: 0.35 ozs. (10 g) approx.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Thermal Cut Off (TCO)
Features
Maximum Current Rating: 15 Amps
Typical Opening Temperature Tolerance: +0 C, −5 C
18 Gauge Solid Copper Wire
Full 1 1/3” leads to fit all replacement configurations
Each device comes packaged with 2 crimp splices for solderless connection (Poly−bag orders only)
All types meet the requirements of Underwriters Laboratories
Specifications, CSA, and VDE
UL File No. E49429
UL File No. E117626 (Guide # XCMQ2)
C−UL File No. E117626 (Guide # XCMQ8)
CSA File No. LR43279
VDE File No. 115369
Diagram 193
3.220 (81.78) Max
1.380 (35.0)
Case End
.457 (11.6) Max
NOTE: Tin plated lead
1.383 (35.1) **
Epoxy End
NOTE: Silver plated lead
.160 (4.1) Dia Max
** Some devices may have a lead length of .980 (25.0)
Specifications
Electrical Rating
Volts
Interrupting
15A
25A RES
20A RES
125VA Pilot Duty
3A Motor Rating
120/250 VAC
240 VAC
277 VAC
120−277 VAC
180 VAC
Continuous
10A
16.7 RES
15A RES
Twenty One Thermal Cut−offs (also known as Thermal Fuses) are now included in the NTE product line. They are
miniature, NON−RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. NTE thermal cutoffs are UL and CSA listed.
Literally thousands of different applications have been devised for thermal−cutoffs, thus providing a large replacement
market. Such applications include:
Hair Dryers
Refrigerators
Battery Chargers
Irons
Hot Plates
Glue Guns
Electric Motors
Window Fans
Coffee Makers
Microwave Ovens
Popcorn Poppers
Dishwashers
Toasters
UPS
And hundreds of others
The TCO (Thermal Cut−Off) responds to temperature by interrupting an electrical circuit when the operating and/or
environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic
pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.
NTE
Type No.
8065
8070
8076
8081
8085
8090
8096
8098
8103
8108
8115
Diag.
No.
193
193
193
193
193
193
193
193
193
193
193
Functioning
Temperature
Holding
Temperature
Maximum
Temperature
C
F
C
F
C
F
66
72
77
84
87
93
98
100
104
109
117
151
162
171
184
189
200
209
212
220
229
243
42
50
−
60
−
−
76
−
80
88
−
108
122
−
140
−
−
169
−
176
190
−
130
115
−
125
−
−
140
−
150
140
−
266
239
−
257
−
−
284
−
302
284
−
NTE
Type No.
8118
8125
8139
8149
8167
8181
8182
8213
8226
8242
Diag.
No.
193
193
193
193
193
193
193
193
193
193
Functioning
Temperature
Holding
Temperature
Maximum
Temperature
C
F
C
F
C
F
121
128
141
152
169
184
192
216
228
240
250
263
286
306
336
364
378
421
443
464
95
106
117
128
146
160
162
191
−
200
203
223
243
262
295
320
324
376
−
392
170
155
171
176
300
300
290
241
−
290
338
311
340
349
572
572
554
466
−
554
Note 1: Temperature sensitive devices. Do not store above +48 C (+120 F).
Note 2: Color Band does not denote temperature group.
Note 3: The electrical resistance of the NTE series thermal cut−off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15
Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.
Note 4: A general rule of thumb for continuous operating temperature for thermal cut−offs is 30 C less than the Maximum Opening Temperature.
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
15
Metal Oxide Varistor (MOV)
Features
Diagram 192/301/302
Available in 8.5mm, 16mm, and 23mm
Increased power dissipation
Low leakage
Low overshoot characteristics
High suppression capability
D
LS
Applications
LL
Protect equipment from external transients on AC power lines
and transients on telephone/signal lines
Protect semiconductor components from transients caused
by external equipment like motors, transformers, relay coils
and solenoids
L
LD
T
Dimensions (in/mm)
Diag. No.
D
L
T
LL
LS
LD
192
.945 (24.0)
1.230 (31.0)
.291 (7.4)
1.063 (27.0)
.394 (10.0)
.039 (1.0)
301
.345 (9.0)
.475 (12.07)
.235 (5.96)
1.000 (25.4)
.200 (5.08)
.024 (0.6)
302
.699 (17.75)
.787 (20.0)
.275 (7.0)
1.000 (25.4)
.315 (8.0)
.031 (0.78)
Note 1. All dimensions are “Maximum” except “LD”.
Specifications
Maximum Ratings (TA = 25 C)
Continuous
16
NTE Type
Number
Diagram Number/
Case Diameter
1V010
2V010
1V014
2V014
1V015
2V015
1V017
2V017
1V020
2V020
1V025
2V025
1V030
2V030
1V035
2V035
1V040
2V040
1V050
2V050
1V060
2V060
1V075
2V075
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16.mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
Characteristics
Transient
Peak Current
(8/20 s)
(Amps)
Nominal
Varistor
Voltage
@ 1mA DC
Test Current
(Volts)
Maximum
Clamping
Voltage, VC
@ Test Current
(8/20 s)
(Volts)
Transient
Power
Dissipation
(Watts)
RMS
Voltage
(Volts)
DC
Voltage
(Volts)
Energy
(10/1000 s)
(Joules)
Vm (AC)
Vm (DC)
WTM
ITM
VNOM
VCL
PD
10
10
14
14
15
15
17
17
20
20
25
25
30
30
35
35
43
43
52
52
63
63
75
75
12
12
18
18
20
20
22
22
26
26
31
31
38
38
45
45
55
55
66
66
80
80
95
95
0.8
3.5
1.2
4.0
1.0
4.5
1.3
5.0
1.5
6.0
1.7
7.0
2.3
8.5
2.7
10.0
3.2
13.0
4.0
14.0
6.0
18.0
5.0
21.0
250
1000
250
1000
250
1000
250
1000
250
1000
250
1000
250
1000
250
1000
250
1000
250
1000
1200
4500
1200
4500
18
18
22
22
24
24
27
27
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
45
45
55
55
52
48
60
60
70
70
80
80
95
95
110
110
135
135
150
150
175
175
205
205
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
0.25
0.60
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Metal Oxide Varistor (MOV) (Continued)
Specifications (Cont’d)
Maximum Ratings (TA = 25 C)
Continuous
NTE Type
Number
Diagram Number/
Case Diameter
1V095
2V095
1V115
2V115
1V130
2V130
524V13
1V150
2V150
524V15
1V175
524V17
1V250
2V250
524V25
1V275
2V275
524V27
1V300
2V300
524V30
2V420
524V42
2V480
524V48
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
301 (8.5mm)
302 (16mm)
192 (23mm)
301 (8.5mm)
302 (16mm)
192 (23mm)
301 (8.5mm)
192 (23mm)
301 (8.5mm)
302 (16mm)
192 (23mm)
301 (8.5mm)
302 (16mm)
192 (23mm)
301 (8.5mm)
302 (16mm)
192 (23mm)
302 (16mm)
192 (23mm)
302 (16mm)
192 (23mm)
Peak Current
(8/20 s)
(Amps)
Nominal
Varistor
Voltage
@ 1mA DC
Test Current
(Volts)
WTM
ITM
VNOM
VCL
PD
7.0
29.0
10.0
35.0
10.0
39.0
72.0
10.0
40.0
80.0
12.0
90.0
20.0
70.0
129.0
20.0
72.0
135.0
22.0
79.0
149.0
90.0
160.0
105.0
180.0
1200
4500
1200
4500
1200
4500
6500
1200
4500
6500
1200
6500
1200
4500
6500
1200
4500
6500
1200
4500
6500
4500
6500
4500
6500
150
150
171
171
216
216
216
240
240
240
270
270
390
390
390
430
430
430
470
470
470
680
680
750
750
250
250
295
300
355
355
355
410
410
410
450
450
630
630
630
685
685
685
740
740
740
1110
1110
1240
1240
0.25
0.60
0.25
0.60
0.25
0.60
1.00
0.25
0.60
1.00
0.25
1.00
0.25
0.60
1.00
0.25
0.60
1.00
0.25
0.60
1.00
0.60
1.00
0.60
1.00
RMS
Voltage
(Volts)
DC
Voltage
(Volts)
Energy
(10/1000 s)
(Joules)
Vm (AC)
Vm (DC)
95
95
115
115
135
135
135
160
160
160
170
170
240
240
240
260
260
260
280
280
280
420
420
480
480
125
125
150
150
180
180
180
210
210
210
225
225
320
320
320
330
330
330
370
370
370
560
560
640
640
SELECTING THE PROPER MOV VOLTAGE RATING:
1.
Determine the required voltage rating.
First, the maximum steady−state operating voltage of the circuit
must be determined. Care must be taken to use the upper tolerance limit of the voltage source, e.g., for a 220VAC line,a 10%
high line condition should be assumed, resulting in 242 Volts.
Once the level is determined, refer to the column in the data table
headed “Maximum Continuous Voltage” and select a group having the nearest greater value to this level.
NTE Electronics, Inc.
Characteristics
Transient
Voice (973) 748−5089
FAX (973) 748−6224
100? H
Maximum
Clamping
Voltage, VC
@ Test Current
(8/20 s)
(Volts)
Transient
Power
Dissipation
(Watts)
D
0.1? F
+
150? F
−
Typical Power Supply Circuit
http://www.nteinc.com
17
IC Protector (ICP)
Features
Diagram 480
Precise and extremely stable cut−off characteristics
Small internal resistance with low voltage drop
Nonflammable
Compact
Available in both “F” and “N” Types
.276 (7.0) Max
.102 (2.6) Max
.142
(3.6)
Max
Applications
.129
(3.3)
Min
Overcurrent protection
.025 (0.65)
.022 (0.55)
.017 (0.45)
.051 (1.3)
.200 (5.08)
Diagram 481
Diagram 481 alt.
.200 (5.08)
.200 (5.08)
.200
(5.08)
Max
.500
(12.7)
Min
The IC Protector (ICP) is an overcurrent protection device having
stable and high−speed circuit tripping characteristics which enables
these devices to shut off the circuit quickly and safely. This quick shut−
off response protects valuable semiconductor devices and circuits from
common load short−circuit failures.
.200
(5.08)
Max
.500
(12.7)
Min
.019 (0.5)
(2 Leads)
.100 (2.54)
.019 (0.5)
(2 Leads)
.197 (5.0)
Specifications
18
Maximum
Rated Current
(Amps)
Typical
Internal
Resistance
( )
Operating
Temperature
( C)
NTE Type
Number
Diagram
Number
Case Style
Maximum
Rated Voltage
(Volts)
Topr
Tstg
15005E
480
“F” Type
50
0.4
0.220
−55 to +125
−55 to +125
15006E
480
“F” Type
50
0.6
0.135
−55 to +125
−55 to +125
15007E
480
“F” Type
50
0.8
0.100
−55 to +125
−55 to +125
15008E
480
“F” Type
50
1.0
0.070
−55 to +125
−55 to +125
15009E
480
“F” Type
50
1.5
0.042
−55 to +125
−55 to +125
15019E
481
“N” Type
50
0.25
0.350
−55 to +125
−55 to +125
15020E
481
“N” Type
50
0.4
0.220
−55 to +125
−55 to +125
15021E
481
“N” Type
50
0.6
0.135
−55 to +125
−55 to +125
15022E
481
“N” Type
50
0.8
0.100
−55 to +125
−55 to +125
15023E
481
“N” Type
50
1.0
0.070
−55 to +125
−55 to +125
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
Storage
Temperature
( C)
http://www.nteinc.com
Unidirectional Overvoltage Transient Suppressors
Features
Diagram 182
Axial Lead Package
DC Unidirectional Surge Clamping Diodes
1.100
(27.94)
Min
Applications
.375
(9.52)
Max
Transient Protection for 5.0V, TTL, DTL, and MOS Circuitry
.042 (1.07) Dia Max
.205 (5.21) Dia Max
.050 (1.27) Max (Both Ends)
Color Band Denotes Cathode
(Unidirectional ONLY. Bidirectional devices
have NO band.)
Diagram 183/596
LL
L
LD
D
Color Band Denotes Cathode
(Unidirectional ONLY. Bidirectional devices
have NO band.)
Dimensions (in/mm)
Diag. No.
D
L
LL
LD
183
.205 (5.21)
.375 (9.52)
1.100 (27.94)
.042 (1.07)
596
.360 (9.1)
.360 (9.1)
1.100 (27.94)
.052 (1.3)
Note 1. All dimensions are “Maximum” except “LL” (Minimum).
Specifications
(1500 Watts of Peak Pulse Power Dissipation @ +25 C for 1msec)
NTE Type
Number
4900
Diagram
Number
Application
Transient Protection for 5.0V TTL, DTL
and MOS Circuitry
Maximum
Reverse
Stand Off
Voltage
(See Note 1)
(Volts)
Maximum
Reverse
Leakage
Current @ VR
( A)
Minimum
Breakdown
Voltage @ 1mA
(Volts)
VR
IR
BV
182
5
300
Maximum
Clamping Voltage
@ Ipp/IRSM
(Volts)
VC
6
Ipp = 30A
Ipp = 60A
IRSM = 120A
7.6
8.0
8.5
Maximum Ratings
NTE Type
Number
Diagram
Number
Maximum Reverse
Stand Off Voltage
(Volts)
Breakdown Voltage @ IT
(Volts)
VR
VBR
Min
Typ
Max
Clamping Voltage
@ Ipp (1msec)
(Volts)
Reverse Leakage
Current @ VR
( A)
Peak Pulse
Current
(Amps)
VC
IR
Ipp
Temperature
Coefficient
of BV%/ C
IT mA
4902
183
5.80
6.45
6.80
7.14
10.0
10.5
1000.0
143.00
0.057
4904
183
6.40
7.13
7.50
7.88
10.0
11.3
500.0
132.00
0.061
4906
183
7.02
7.79
8.20
8.61
10.0
12.1
200.0
124.00
0.065
4910
183
8.55
9.50
10.00
10.50
1.0
14.5
10.0
103.00
0.073
4914
183
10.20
11.40
12.00
12.60
1.0
16.7
5.0
90.00
0.078
4918
183
11.10
12.40
13.00
13.70
1.0
18.2
5.0
82.00
0.081
4920
183
12.80
14.30
15.00
15.80
1.0
21.2
5.0
71.00
0.084
4922
183
13.60
15.20
16.00
16.80
1.0
22.5
5.0
67.00
0.086
4926
183
15.30
17.10
18.00
18.90
1.0
25.2
5.0
59.50
0.088
4928
183
17.10
19.00
20.00
21.00
1.0
27.7
5.0
54.00
0.090
4932
183
20.50
22.80
24.00
25.20
1.0
33.2
5.0
45.00
0.094
4934
183
23.10
25.70
27.05
28.40
1.0
37.5
5.0
40.00
0.096
4936
183
25.60
28.50
30.00
31.50
1.0
41.4
5.0
36.00
0.097
4938
183
28.20
31.40
33.00
34.70
1.0
45.7
5.0
33.00
0.098
4940
183
30.80
34.20
36.00
37.80
1.0
49.9
5.0
30.00
0.099
4942
183
33.30
37.10
39.00
41.00
1.0
53.9
5.0
28.00
0.100
4944
183
36.80
40.90
43.00
45.20
1.0
59.3
5.0
25.30
0.101
Note 1: A Transient Suppressor is usually selected according to the “Reverse Stand Off Voltage (VR)” which should be equal to or greater than
the DC or continuous peak operating voltage level.
Note 2: Steady State Power Dissipation is 5 Watts. Forward Surge Current is 200 Amps.
Storage & Operating Temperature Range is −65 C to +175 C.
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
19
Unidirectional Overvoltage Transient Suppressors
Specifications (Cont’d)
(1500 Watts of Peak Pulse Power Dissipation @ +25 C for 1msec)
Maximum Ratings
NTE Type
Number
Diagram
Number
Maximum Reverse
Stand Off Voltage
(Volts)
4946
4950
4952
4954
4958
4960
4962
4964
4966
4968
4970
4972
4974
4976
4978
4980
4982
4984
4988
4990
4992
4994
4996
4998
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
183
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
121.00
136.00
145.00
154.00
185.00
214.00
171.00
256.00
273.00
300.00
342.00
376.00
Breakdown Voltage @ IT
(Volts)
VR
VBR
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
135.00
152.00
162.00
171.00
209.00
237.00
190.00
285.00
304.00
333.00
380.00
418.00
47.00
51.05
56.00
62.00
68.00
75.00
82.00
91.00
100.00
110.00
120.00
130.00
150.00
160.00
170.00
180.00
220.00
250.00
200.00
300.00
320.00
350.00
400.00
440.00
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
165.00
168.00
179.00
189.00
231.00
263.00
210.00
315.00
336.00
368.00
420.00
462.00
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Clamping Voltage
@ Ipp (1msec)
(Volts)
Reverse Leakage
Current @ VR
( A)
VC
IR
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
215.0
219.0
234.0
246.0
328.0
344.0
274.0
414.0
438.0
482.0
548.0
603.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Peak Pulse
Current
(Amps)
Temperature
Coefficient
of BV%/ C
Ipp
23.20
21.40
19.50
17.70
16.30
14.60
13.30
12.00
11.00
9.90
9.10
8.40
7.00
6.80
6.40
6.10
4.60
5.00
5.50
3.58
4.50
3.08
2.78
3.50
0.101
0.102
0.103
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.109
0.109
0.108
0.110
0.110
0.110
0.110
0.110
(5000 Watts of Peak Pulse Power Dissipation @ +25 C for 1msec)
Maximum Ratings
NTE Type
Number
Diagram
Number
Maximum Reverse
Stand Off Voltage
(Volts)
Breakdown Voltage @ IT
(Volts)
VR
VBR
Min
Typ
Max
Clamping Voltage
@ Ipp (1msec)
(Volts)
Reverse Leakage
Current @ VR
( A)
Peak Pulse
Current
(Amps)
VC
IR
Ipp
Temperature
Coefficient
of BV%/ C
IT mA
4828
596
15.0
16.7
−
20.4
5.0
24.4
10.0
206.00
0.094
4840
596
24.0
26.7
−
29.5
5.0
38.9
10.0
128.00
0.101
4846
596
30.0
33.3
−
36.8
5.0
48.4
10.0
103.00
0.103
4848
596
33.0
36.7
−
40.6
5.0
53.3
10.0
94.00
0.104
4850
596
36.0
40.0
−
44.2
5.0
58.1
10.0
85.00
0.104
4858
596
48.0
53.3
−
58.9
5.0
77.4
10.0
65.00
0.106
4868
596
64.0
71.1
−
78.6
5.0
103.0
10.0
49.00
0.108
Note 1: A Transient Suppressor is usually selected according to the “Reverse Stand Off Voltage (VR)” which should be equal to or greater than
the DC or continuous peak operating voltage level.
Note 2: Steady State Power Dissipation is 5 Watts. Forward Surge Current is 200 Amps.
Storage & Operating Temperature Range is −65 C to +175 C.
20
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Bidirectional Overvoltage Transient Suppressors
Features
Diagram 183
Axial Lead Package
AC Bidirectional Surge Clamping Diodes
1.100
(27.94)
Min
Applications
.375
(9.52)
Max
Bidirectional Transient Protection of Data Transmission, Digital
Controls, Computer Systems, etc.
.042 (1.07) Dia Max
.205 (5.21) Dia Max
Color Band Denotes Cathode
(Unidirectional ONLY. Bidirectional devices
have NO band.)
Specifications
(1500 Watts of Peak Pulse Power Dissipation @ +25 C for 1msec)
NTE Type
Number
4901
Minimun
Breakdown
Voltage
(Volts @ mA)
Diagram
Number
Application
Transient Protection of Data Transmission,
Digital Controls, Computer Systems, etc.
183
Maximum
Reverse
Stand−Off
Voltage
(Note 1)
(Volts)
Maximum
Reverse
Leakage
Current @
VRWM
( A)
Maximum
Reverse
Surge
Current
(Amps)
Maximum
Clamping
Voltage
@ IRSM
(Volts)
VBR
@ IT
VRWM
IR
IRSM
VRSM
6.00
1.0
5.0
300
160
9.4
Temperature
Coefficient
of BV%/ C
0.051
Maximum Ratings
NTE Type
Number
Diagram
Number
Maximum Reverse
Stand Off Voltage
(Volts)
Breakdown Voltage @ IT
(Volts)
VR
VBR
Min
Typ
Max
Clamping Voltage
@ Ipp (1msec)
(Volts)
Reverse Leakage
Current @ VR
( A)
Peak Pulse
Current
(Amps)
VC
IR
Ipp
Temperature
Coefficient
of BV%/ C
IT mA
4903
183
5.50
6.12
6.80
7.48
10.0
10.8
1000.0
139.00
0.057
4905
183
6.40
7.13
7.50
7.88
10.0
11.3
500.0
132.00
0.061
4907
183
7.02
7.79
8.20
8.61
10.0
12.1
200.0
124.00
0.065
4911
183
8.55
9.50
10.00
10.50
10.0
14.5
10.0
103.00
0.073
4915
183
10.20
11.40
12.00
12.60
1.0
16.7
5.0
90.00
0.078
4919
183
11.10
12.40
13.00
13.70
1.0
18.2
5.0
82.00
0.081
4921
183
12.80
14.30
15.00
15.80
1.0
21.1
5.0
71.00
0.084
4923
183
13.60
15.20
16.00
16.80
1.0
22.5
5.0
67.00
0.086
4927
183
15.30
17.10
18.00
18.90
1.0
25.2
5.0
59.50
0.088
4929
183
17.10
19.00
20.00
21.00
1.0
27.7
5.0
54.00
0.090
4933
183
20.50
22.80
24.00
25.20
1.0
33.2
5.0
45.00
0.094
4935
183
23.10
25.70
27.05
28.40
1.0
37.5
5.0
40.00
0.096
4937
183
25.60
28.50
30.00
31.50
1.0
36.0
5.0
41.40
0.097
4939
183
28.20
31.40
33.00
34.70
1.0
45.7
5.0
33.00
0.098
4941
183
30.80
34.20
36.00
37.80
1.0
49.9
5.0
30.00
0.099
4943
183
33.30
37.10
39.00
41.00
1.0
53.9
5.0
28.00
0.100
4945
183
36.80
40.90
43.00
45.20
1.0
59.3
5.0
25.30
0.101
4947
183
40.20
44.70
47.00
49.40
1.0
64.8
5.0
23.30
0.101
4951
183
43.60
48.50
51.05
53.60
1.0
70.1
5.0
21.40
0.102
4953
183
47.80
53.20
56.00
58.80
1.0
77.0
5.0
19.50
0.103
4955
183
53.00
58.90
62.00
65.10
1.0
85.0
5.0
17.70
0.104
4959
183
58.10
64.60
68.00
71.40
1.0
92.0
5.0
16.30
0.104
4961
183
64.10
71.30
75.00
78.80
1.0
103.0
5.0
14.60
0.105
4963
183
70.10
77.90
82.00
86.10
1.0
113.0
5.0
13.30
0.105
4965
183
77.80
86.50
91.00
95.50
1.0
125.0
5.0
12.00
0.106
4967
183
85.50
95.00 100.00 105.00
1.0
137.0
5.0
11.00
0.106
Note 1: A Transient Suppressor is usually selected according to the “Reverse Stand Off Voltage (VR)” which should be equal to or greater than
the DC or continuous peak operating voltage level.
Note 2: Steady State Power Dissipation is 5 Watts. Forward Surge Current is 200 Amps.
Storage & Operating Temperature Range is −65 C to +175 C.
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
21
Bidirectional Overvoltage Transient Suppressors
Specifications (Cont’d)
(1500 Watts of Peak Pulse Power Dissipation @ +25 C for 1msec)
Maximum Ratings
NTE Type
Number
Diagram
Number
Maximum Reverse
Stand Off Voltage
(Volts)
Breakdown Voltage @ IT
(Volts)
VR
VBR
Min
Typ
Max
Clamping Voltage
@ Ipp (1msec)
(Volts)
Reverse Leakage
Current @ VR
( A)
Peak Pulse
Current
(Amps)
VC
IR
Ipp
Temperature
Coefficient
of BV%/ C
IT mA
4969
183
94.00
105.00
110.00
116.00
1.0
152.0
5.0
9.90
0.107
4971
183
102.00
114.00 120.00 126.00
1.0
165.0
5.0
9.10
0.107
4973
183
111.00
124.00 130.00 137.00
1.0
179.0
5.0
8.40
0.107
4975
183
128.00
143.00 150.00 158.00
1.0
207.0
5.0
7.20
0.108
4977
183
136.00
152.00 160.00 168.00
1.0
219.0
5.0
6.80
0.108
4979
183
145.00
162.00 170.00 179.00
1.0
234.0
5.0
6.40
0.108
4981
183
154.00
171.00 180.00 189.00
1.0
246.0
5.0
6.10
0.108
4983
183
185.00
209.00 220.00 231.00
1.0
328.0
5.0
4.60
0.109
4985
183
214.00
237.00 250.00 263.00
1.0
344.0
5.0
5.00
0.109
4989
183
171.00
190.00 200.00 210.00
1.0
274.0
5.0
5.50
0.108
4991
183
256.00
285.00 300.00 315.00
1.0
414.0
5.0
3.58
0.110
4993
183
273.00
304.00 320.00 336.00
1.0
438.0
5.0
4.50
0.110
4995
183
300.00
333.00 350.00 368.00
1.0
482.0
4.0
3.08
0.110
4997
183
342.00
380.00 400.00 420.00
1.0
548.0
4.0
2.78
0.110
4999
183
376.00
418.00 440.00 462.00
1.0
603.0
5.0
3.50
0.110
Note 1: A Transient Suppressor is usually selected according to the “Reverse Stand Off Voltage (VR)” which should be equal to or greater than
the DC or continuous peak operating voltage level.
Note 2: Steady State Power Dissipation is 5 Watts. Forward Surge Current is 200 Amps.
Storage & Operating Temperature Range is −65 C to +175 C.
22
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Resettable Fuse Introduction
Resettable Circuit Protection
When it comes to Polymeric Positive Temperature
Coefficient (PPTC) circuit protection, you now have
a choice.
Polymeric fuses are made from a conductive plastic
formed into thin sheets, with electrodes attached to either side. The conductive plastic is manufactured from
a non−conductive crystalline polymer and a highly conductive carbon balck. The electrodes ensure even distribution of power through the device, and provide a surface for leads to be attached or for custom mounting.
The phenomenon that allows conductive plastic materials to be used for resettable overcurrent protection devices is that they exhibit a very large non−linear Positive
Temperature Coefficient (PTC) effect when heated.
PTC is a characteristic that many materials exhibit
whereby resistance increases with temperature. What
makes the polymeric conductive plastic material unique
is the magnitude of its resistance increase. At a specific
transition temperature, the increase is resistance is so
great that it is typically expressed on a log scale.
107
106
LOG R OHMS
105
104
103
102
101
100
0
20
40
60
80
TEMPERATURE C
100
120
140
How Polymeric Resettable
Overcurrent Protectors Work
The conductive carbon black filler material in the polymeric device is dispersed in a polymer that has a crystalline structure. The crystalline structure densely packs
the carbon particles into its crystalline boundry so they
are close enough together to allow current to flow
through the polymer insulator via these carbon “chains”.
When the conductive plastic material is at normal room
temperature, there are numerous carbon chains forming conductive paths through the material.
Under fault conditions, excessive current flows through
the polymeric device. I2R heating causes the conductive
plastic material’s temperature to rise. As this self heating
continues, the material’s temperature continues to rise
until it exceeds its phase transformation temperature.
As the material passes through this phase transformation temperature, the densely packed crystalline polymer matrix changes to an amorphous structure. This
phase change is accompanied by a small expansion. As
the conductive particles move apart from each other,
NTE Electronics, Inc.
Voice (973) 748−5089
most of them no longer conduct current and the resistance of the device increases sharply.
The material will stay “hot”, remaining in this high resistance state as long as the power is applied. The device
will remain latched, providing continuous protection, until the fault is cleared and the power is removed. Reversing the phase transformation allows the carbon chains
to re−form as the polymer re−crystallizes. The resistance quickly returns to its original value.
Product Selection
To select the correct polymeric circuit protection device,
complete the imformation listed below for application,
and then refer to thwe resettable overcurrent protector
data sheets.
1. Determine the normal operating current:
__________ amps
2. Determine the maximum circuit voltage (Vmax):
__________ volts
3. Determine the fault current (Imax):
__________ amps
4. Determine the operating temperature range:
Minimum Temperature: __________ C
Maximum Temperature: __________ C
5. Select a product family so that the maximum rating
for Vmax and Imax is higher than the maximum circuit
voltage and fault current in the application.
6. Using the IHold vs. Temperature Table on the product family data sheet, select the polymeric device at
the maximum operating temperature with an IHold
greater than or equal to the normal operating current.
7. Verify that the selected device will trip under fault
conditions by checking in the ITrip table that the fault
current is greater than ITrip for the selected device,
at the lowest operating temperature.
8. Order samples and test in application.
Applications
The benefits of polymeric Resettable Overcurrent Protectors are being recognized by more and more design
engineers, and new applications are being discovered
every day.
The use of polymeric types of devices have been widely
accepted in the following applications and industries:
FAX (973) 748−6224
Personal computers
Laptop computers
Personal digital assistants
Transformers
Small and medium electric motors
Audio equipment and speakers
Test and measurement equipment
Security and fire alarm systems
Personal care products
Point−of−sale equipment
Industrial controls
Automotive electronics and harness protection
Marine electronics
Battery−operated toys
http://www.nteinc.com
23
Polymeric PTC Resettable Fuses
Features
Diagram 629
Radial Leaded, High Hold Current, Solid State
Operation Current: 100mA 9A
Maximum Voltage: 30V
Temperature Range: −40 C to +85 C
Cured, Flame Retardant Epoxy Polymer Insulating Material
Meets UL 94V−0
A
Diagram 630
A
E
Applications
E
B
B
Computers & Peripherals
Security and Fire Alarm Systems
General Electronics
Loud Speakers
Automotive Applications
Power Transformers
D
D
C
C
NOTE:
Shape changes from round to square starting
with NTE16016−ECG.
Product Dimensions (Dimensions are in inches (mm))
A
B
C
Tol.
D
E
Physical Characteristice
Min.
Max.
Diag.
No.
Lead Dia.
NTE Type No.
NTE16000−ECG
Max.
Max.
Nom.
Material
.290 (7.4)
.500 (12.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/NiCu
NTE16001−ECG
.290 (7.4)
.500 (12.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/CuFe
NTE16002−ECG
.290 (7.4)
.500 (12.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/CuFe
NTE16003−ECG
.290 (7.4)
.500 (12.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/CuFe
NTE16004−ECG
.290 (7.4)
.530 (13.4)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/CuFe
NTE16005−ECG
.290 (7.4)
.540 (13.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/CuFe
NTE16006−ECG
.310 (7.9)
.540 (13.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/Cu
NTE16007−ECG
.380 (9.7)
.600 (15.2)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/Cu
NTE16008−ECG
.410 (10.4)
.630 (16.0)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/Cu
NTE16009−ECG
.460 (11.7)
.660 (16.7)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.122 (3.1)
629
.020 (0.51)
Sn/Cu
NTE16010−ECG
.290 (7.4)
.480 (12.2)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.020 (0.51)
Sn/Cu
NTE16011−ECG
.350 (8.9)
.550 (14.0)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
629
.020 (0.51)
Sn/Cu
NTE16012−ECG
.350 (8.9)
.750 (18.9)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
629
.020 (0.51)
Sn/Cu
NTE16013−ECG
.400 (10.2)
.660 (16.8)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
629
.020 (0.51)
Sn/Cu
NTE16014−ECG
.470 (12.0)
.720 (18.4)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
629
.020 (0.51)
Sn/Cu
NTE16015−ECG
.470 (12.0)
.720 (18.3)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16016−ECG
.470 (12.0)
.720 (18.3)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16017−ECG
.570 (14.4)
.970 (24.8)
.200 (5.1)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16018−ECG
.690 (17.4)
.980 (24.9)
.400 (10.2)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16019−ECG
.760 (19.3)
1.260 (31.9)
.400 (10.2)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16020−ECG
.870 (22.1)
1.170 (29.8)
.400 (10.2)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16021−ECG
.960 (24.2)
1.300 (32.9)
.400 (10.2)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
NTE16022−ECG
.960 (24.2)
1.300 (32.9)
.400 (10.2)
.027 (0.7)
.300 (7.6)
.120 (3.0)
630
.030 (0.81)
Sn/Cu
24
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Polymeric PTC Resettable Fuses (Cont’d)
Specifications
IHold
ITrip
Amperes at 23 C
Initial Resistance
1 Hour (R1)
Post−Trip
Resistance
Max. Time
To Trip at 5*lh
Tripped Power
Dissipation
Ohms at 23 C
Ohms at 23 C
Seconds at 23 C
Watts at 23 C
Diag.
No.
V max.
Volts
I max.
Amps
Min.
Max
629
60
40
0.10
0.20
2.50
4.50
7.50
4.0
0.38
16001−ECG
629
60
40
0.17
0.34
2.00
3.20
8.00
3.0
0.48
16002−ECG
629
60
40
0.20
0.40
1.50
2.84
4.40
2.2
0.40
16003−ECG
16004−ECG
629
629
60
60
40
40
0.25
0.30
0.50
0.60
1.00
0.76
1.95
1.36
3.00
2.10
2.5
3.0
0.45
0.50
16005−ECG
629
60
40
0.40
0.80
0.52
0.86
1.29
3.8
0.55
16006−ECG
629
60
40
0.50
1.00
0.41
0.77
1.17
4.0
0.75
16007−ECG
629
60
40
0.65
1.30
0.27
0.48
0.72
5.3
0.90
16008−ECG
16009−ECG
629
629
60
60
40
40
0.75
0.90
1.50
1.80
0.18
0.14
0.40
0.31
0.60
0.47
6.3
7.2
0.90
1.00
16010−ECG
630
30
40
0.90
1.80
0.07
0.12
0.22
5.9
0.60
16011−ECG
629
30
40
1.10
2.20
0.10
0.18
0.27
6.6
0.70
16012−ECG
629
30
40
1.35
2.70
0.065
0.115
0.17
7.3
0.80
16013−ECG
16014−ECG
629
629
30
30
40
40
1.60
1.85
3.20
3.70
0.055
0.04
0.105
0.07
0.15
0.11
8.0
8.7
0.90
1.00
16015−ECG
630
30
40
2.50
5.00
0.025
0.048
0.07
10.3
1.20
16016−ECG
630
30
40
3.00
6.00
0.02
0.05
0.08
10.8
2.00
16017−ECG
630
30
40
4.00
8.00
0.01
0.03
0.05
12.7
2.50
16018−ECG
16019−ECG
630
630
30
30
40
40
5.00
6.00
10.00
12.00
0.01
0.005
0.03
0.02
0.05
0.04
14.5
16.0
3.00
3.50
16020−ECG
630
30
40
7.00
14.00
0.005
0.02
0.03
17.5
3.80
16021−ECG
630
30
40
8.00
16.00
0.005
0.02
0.03
18.8
4.00
16022−ECG
630
* Tested at 40 Amps.
30
40
9.00
18.00
0.005
0.01
0.02
*20.0
4.20
NTE Type No.
16000−ECG
Hold
Trip
Max.
Technical Data
Operating/Storage Temperature
−40 C to +85 C
Maximum Device Surface Temperature
in Tripped State
+125 C
Passive Aging
+85 C, 1000 Hours
5% Typical Resistance Change
Humidity Aging
+85 C, 85% R.H. 1000 Hours
5% Typical Resistance Change
Thermal Shock
+125 C/−40 C 10 Times
Mechanical Shock
MIL−STD−202, Method 213,
Condition 1 (100g, 6 Seconds)
No Resistance Change
Solvent Resistance
MIL−STD−202, Method 215
No Change
Vibration
MIL−STD−883C, Method 2007.1, Condition A
No Change
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
10% Typical Resistance Change
http://www.nteinc.com
25
Polymeric PTC Resettable Fuses (Cont’d)
Time to Trip (Seconds)
Typical Time to Trip at +23 C
100
10
1
0.1
0.0
1
0.001
0.1
1
10
100
Fault Current (Amps)
Thermal Derating Chart − IHOLD (Amps) *
Ambient Operating Temperature
NTE Type No.
NTE16000−ECG
−40 C
−20 C
0 C
+23 C
+40 C
+50 C
+60 C
+70 C
+85 C
0.16
0.14
0.12
0.10
0.08
0.07
0.06
0.05
0.04
NTE16001−ECG
0.26
0.23
0.20
0.17
0.14
0.12
0.11
0.09
0.07
NTE16002−ECG
0.31
0.27
0.24
0.20
0.16
0.14
0.13
0.11
0.08
NTE16003−ECG
NTE16004−ECG
0.39
0.47
0.34
0.41
0.30
0.36
0.25
0.30
0.20
0.24
0.18
0.22
0.16
0.19
0.14
0.16
0.10
0.12
NTE16005−ECG
0.62
0.54
0.48
0.40
0.32
0.29
0.25
0.22
0.16
NTE16006−ECG
0.78
0.68
0.60
0.50
0.41
0.36
0.32
0.27
0.20
NTE16007−ECG
1.01
0.88
0.77
0.65
0.53
0.47
0.41
0.35
0.26
NTE16008−ECG
NTE16009−ECG
1.16
1.40
1.02
1.22
0.89
1.07
0.75
0.90
0.61
0.73
0.54
0.65
0.47
0.57
0.41
0.49
0.30
0.36
NTE16010−ECG
1.40
1.22
1.07
0.90
0.73
0.65
0.57
0.49
0.36
NTE16011−ECG
1.60
1.43
1.27
1.10
0.91
0.85
0.75
0.67
0.57
NTE16012−ECG
1.96
1.76
1.55
1.35
1.12
1.04
0.92
0.82
0.70
NTE16013−ECG
NTE16014−ECG
2.32
2.68
2.08
2.41
1.84
2.13
1.60
1.85
1.33
1.54
1.23
1.42
1.09
1.26
0.98
1.13
0.83
0.96
NTE16015−ECG
3.63
3.25
2.88
2.50
2.08
1.93
1.70
1.53
1.30
NTE16016−ECG
4.35
3.90
3.45
3.00
2.49
2.31
2.04
1.83
1.56
NTE16017−ECG
NTE16018−ECG
5.80
7.25
5.20
6.50
4.60
5.75
4.00
5.00
3.32
4.15
3.08
3.85
2.72
3.40
2.44
3.05
2.08
2.60
NTE16019−ECG
8.70
7.80
6.90
6.00
4.98
4.62
4.08
3.66
3.12
NTE16020−ECG
10.15
9.10
8.05
7.00
5.81
5.39
4.76
4.27
3.64
NTE16021−ECG
11.60
10.40
9.20
8.00
6.64
6.16
5.44
4.88
4.16
NTE16022−ECG
* ITrip = 2 IHold
13.05
11.70
10.35
9.00
7.47
6.39
6.12
5.49
4.68
26
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
http://www.nteinc.com
Surge Arresters, Gas Filled
Features
Diagram 628
Axial Lead Package
1.490 (37.7)
.032 (0.813) Dia
.245 (6.22)
.319 (8.1) Dia
Specifications
DC Breakdown Voltage
NTE Type No.
15040−ECG
15041−ECG
15042−EGC
15043−ECG
15044−ECG
15045−ECG
15046−ECG
15047−ECG
15048−ECG
15049AC
15050AC
Diag.
No.
Nominal Voltage
(VDC)
Minimum
Volts
Maximum
Volts
628
628
628
628
628
628
628
628
628
628
628
75
90
110
145
230
300
350
470
600
120VAC
240VAC
60
72
88
116
195
255
297
400
510
225
425
90
108
132
174
265
345
403
540
690
−
−
Electrical Characteristics
Surge Life:
10A 10/1000 s Pulse . . . . . . . . . . . . . . . . . . . . 2500 Operations
500A 10/1000 s Pulse . . . . . . . . . . . . . . . . . . . 1000 Operations
AC Suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2500 Operations
Surge Current:
8/20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20kA
AC Current:
10 Operations 60Hz for 1sec., with 3 min. Intervals . . . 20A
AC Suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5A
AC Current:
11 Cycles 60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20A
AC Suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5A
Insulation Resistance:
100 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000 Megohms
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . −65 to +125 C
Response Time (Typical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 100ns
Voice (973) 748−5089
Maximum Capacitance
Between Electronics
@ 1MHz (pF)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Typical Circuit Applications
Application
CATV
AC Line
Protection
Communication
Power Supplies
Protected Equipment
Trunk Amplifier
Cable Extender, Splitter,
Grounding Block, Convert Box,
30 & 60 VAC Power Supply
117 VAC Line
220 VAC Line, All AC Loads
Modem
Antenna Connected Equipment
NTE Type
15043−ECG
15044−ECG
15049AC
15050AC
15046−ECG
15041−ECG,
15043−ECG,
15044−ECG
15044−ECG,
15047−ECG
Computer
Voltage Doubler, Capacitors,
Voltage Regulator, Rectifier
Diodes
Data Lines
Test Equipment
Meter Inputs
Capacitive
Discharge
Signal Lines
(Single Ended)
Communications
(Lightning)
Power Line
(Lightning)
Ignition Circuit Components,
Pulse Generator Components
Alarm Circuits
15041−ECG,
15044−ECG
15040−ECG,
15045−ECG
15044−ECG,
15046−ECG
15040−ECG
Telephone Line (Normal Mode)
15046−ECG
AC Wall Output (Long Branch
Circuit) 120 VAC
AC Wall Output (Long Branch
Circuit) 120 VAC
Instrumentation Circuits
15049AC
Process Control
(24 MA Signal
Loop)
NTE Electronics, Inc.
Impulse Breakdown
@ (100V/ s)
Maximum Voltage
400
400
450
500
600
700
750
850
1000
700
800
FAX (973) 748−6224
http://www.nteinc.com
15050AC
15040−ECG,
15041−ECG
27
SIDAC − Bidirectional Thyristor Diodes
Features
Diagram 395
Axial Lead Package
Applications
High voltage lamp ignitors
Natural gas ignitors
Gas oil ignitors
High voltage power supplies
Xenon ignitors
Overvoltage protection
Pulse generators
Fluorescent lighting ignitors
.944
(24.0)
Min
.295
(7.5)
Max
.188 (4.78)
.051 (1.29)
The SIDAC is a silicon bilateral voltage triggered switch with greater
power handling capabilities than standard DIACs. Upon application of
a voltage exceeding the SIDAC breakover voltage point, the SIDAC
switches on through a negative resistance region to a low on−state
voltage. Conduction will continue until the current is interrupted or
drops below the minimum holding current of the device.
Specifications
Storage Temperature Range: −30 to +30 C
Junction Temperature: +125 C
Maximum Ratings
28
On
Voltage
(Volts)
Effective
Current
(Amps)
Surge
Current
(Amps)
Holding
Current
(mA)
NTE Type
Number
Diagram
Number
Breakover
Voltage
(Volts)
VBO
VT
ITRMS
ITSM
IHold
PD
6415
395
40 to 60
1.5
1
13
50
850
6416
395
55 to 65
1.5
1
13
50
850
6417
6418
395
395
95 to 113
104 to 118
1.5
1.5
1
1
13
13
50
50
850
850
6419
395
110 to 125
1.5
1
13
50
850
NTE Electronics, Inc.
Voice (973) 748−5089
FAX (973) 748−6224
Power
Dissipation
(mW)
http://www.nteinc.com
SEMICONDUCTORS
Fuses and other circuit protection devices
INTRODUCTION
RELAYS
POTENTIOMETERS
RESISTORS
Extensive New Fuse Line!
Technical Guide:
AUTO
NTE is pleased to present the
1st edition of their Fuse Technical
Guide. This Technical Guide is
designed to give engineers,
technicians and buyers assistance
in selecting the NTE component
best suited for their specific
application or circuit.
GLASS
MINI AUTO
SWITCHES
SOLDER IRON TIPS
• Technical specifications should
be consulted to assure the
proper replacement has been
identified
• ”TYPICAL“ parameters can and
do vary in different applications
BLOCK
CERAMIC
• All operating parameters,
including ”TYPICALS,“ must be
validated for each application
by customers’ technical experts
• NTE reserves the right to make
any changes without further
notice to any product herein
HOLDERS
CLIPS
Find all the critical
electronic components you need...
...in a heartbeat!
To order call us at: 973-748-5089 or fax: 973-748-6224 or visit www.nteinc.com
Cross reference over 500,000 industry parts at nteinc.com
WARRANTY
2 Year Warranty: NTE products are warranted to be free from
defects in materials and workmanship and meet applicable
specifications when tested to ratings. This warranty is in lieu of
any other warranty expressed, implied, or statutory. NTE’s liability
under this warranty is limited to repairing, replacing, or issuing
credit (at the discretion of NTE) for such products that become
defective or fail to meet specification during the warranty period
of two years from the date of sale. The technical data shown is
intended to provide safe areas of operation for NTE products.
Determination as to whether a product is actually defective rests
with NTE. In no event will NTE be liable for consequential or
special damages.
EL74-01 © Copyright July 2008 by NTE Electronics, Inc.
“All Rights Reserved” Printed in USA
ECG® is a registered trademark of NTE Electronics, Inc.
NTE® is a registered trademark of NTE Electronics, Inc.
Technical Assistance: For further detailed product information first
check out our web site at www.nteinc.com. If the information you
need is not there, or you don’t have internet access, you may also
call us at 973-748-5089 or fax us at 973-748-6224.
Safety Warning: NTE devices are not to be used as critical
components in life support equipment. Testing of solid state
devices should be performed by experienced personnel using test
instruments specifically designed for such purposes.
For over 25 years NTE has been your “go-to” supplier for high
quality electronic components. From relays to resistors, semi’s to
switches and heat shrink tubing to hook up wire, NTE helps you
find the parts you need on the Web with our massive database and
exclusive QuickCross™ cross reference system. Plus with our global
network of distributors you’ll have the parts you need in no time.
Visit our Web site today to see for yourself.
www.nteinc.com
Whatever your needs, NTE has the answer!
ECG Aerosol Chemicals
• Butane Fuel
• Smoke Detector Tester Spray
• Antistatic Circuit Refrigerants
• Electronics Degreasers and Washes
• Electronics Contact Cleaners,
Degreasers and Washes
• Electronics Contact Cleaners
with Lubes
• Heavy-Duty Flux Removers
• Jet Air Cleaners
• Heavy-Duty Cleaning Solvents
• Electronics Washes
• Hydroentangled Cellulose/
Polyester C-Fold Wipes
• Silicone Lubricants
• Label and Adhesive Removers
• General Duty Defluxers
• Straw Holders
• Computer Glass and
Plastic Cleaner
• CARB Compliant Types
ECG Test Equipment
• Analog Multimeters
• Digital Multimeters
• AC Clamp-On Digital Meters
• AC Clamp-On Current Adapter
• Digital Capacitance Meter
• Battery Tester
• Handheld Digital Thermometer
• Logic Probes
• Oscilloscope Probes
• Test Leads
• Digital Infrared Thermometer
ECG Butane/Electric Soldering
and Heat Products
• Butane Fuel
• Butane Soldering Irons
• Butane Heat Guns
• Butane Torch
• Electric Corded Soldering Irons
• Electric De-soldering Irons
• Tips and Accessories
• Soldering Iron Kits
• Soldering Guns
• Industrial Heat Guns
• Economy Heat Guns
NTE Capacitors
• Aluminum Electrolytic
• Ceramic Disc
• Tantalum
• Mylar/Polyester Film
• Motor Start/Run
• Ceiling Fan
• Snap-in Mount
• Surface Mount Types
• Multilayer (Monolithic) Ceramic
• Prepackaged Kits
ECG LED Flashlights
• Emerge ‘N See Wind Up Flashlight
• LED Flashlight with
14 Super Bright LEDs
ECG Rotors
• Precision Cut Steel Gears
• Rugged One-Piece
Cast Aluminum Housing
• Large Bearing Surface;
Strong Reinforced Mast
• High Torque
• Automatic Control
• Remote Control
Programmable Version
ECG Surge Suppressor
Outlet Strips
• Plug-in Protection for Office,
Industrial, Institutional and
Residential Applications
• Multi-Outlet Combinations
• Steel or Plastic Case
• Optional Phone-Line Protection
• General Purpose Protector
• Optional EMF/RFI Noise Filter
• Single and 3 Mode Protection
• 90° Rotated Outlets to
Accommodate External
Power Supplies
• Some with 15' Cords
NTE Cable Ties
• Standard Cable Ties
• Specialty Cable Ties
• Cable Tie Tension Tools
• Cable Tie Accessories
• Convenience Packs
• Split Loom
• Assorted Sizes & Colors
NTE Fuses
• Tube Type Case Sizes
3.6 x 10mm / 5 x 20mm / 6 x 30mm
• Glass and Ceramic
• Fast and Slow Blow
• Standard and Mini Automotive
Blade Series
• Fuse Clips
* Panel Mount Holders
Worldwide supplier of high quality electronic components
NTE Heat Shrink Tubing
• Assortment Packs Available
• Thin Wall Cross-Linked Polyolefin
• Dual Wall Cross-Linked Polyolefin
with Adhesive
• Medium Wall with Adhesive
• Thick Wall with Adhesive
• Available in 7 Colors
• Shrink Temperature: 120°C
• Shrink Ratio: 2:1Thin/3:1 Dual
• Cut / Marked Service
NTE Hook-Up Wire
• Automotive Wire
• 300V and 600V Solid
and Stranded Wire
• Teflon® Coated Wire
• Speaker Wire Clear
• Black/Red Bonded Speaker Wire
• 10 Colors and Gauges from 10 to 26
• New High Performance Home Audio
Speaker Cable
• Audio Speaker Cable
NTE LED Tubing
• For Interior Lighting
• Super Bright LEDs
• Blue, Green, Red, White, Amber,
Multi
• Flexible
• Connectible - Up to 15 Tubes
NTE Relays
• Electromechanical
• Solid State
• Automotive Type
• Reed
• Time Delay
• I/O Modules
• Thermal Circuit Breakers
• Magnetic Latching
• Accessories
• Surface Mount Types
• Replacements for
Over 83,400 Types
• Proximity Switches
NTE Resistors
• Flameproof 1/8W to 3W
• Power Wirewound 5W/10W/25W
• Fusible Power Oxide 1W/2W
• Prepackaged Kits
• Surface Mount Wirewound
up to 4 Watt
• Metal Clad Aluminum
Precision Wirewound
• 1% Metal Film
• Fixed & Adjustable Vitreous
from 12 to 300 Watt
• Round Silicone Wirewound Ceramic
from 1 to 10 Watt
NTE Semiconductors
• Super Bright LEDs
• Power Block/Hybrid Mod.
• Industrial Rectifiers/Bridges
• Small Signal/Power Transistors
• Voltage Regulators
• Transient Suppressors
• Thermal Cutoffs
• Thyristors
• Zener Diodes
• Integrated Circuits
• Surface Mount Types
• Replacements for Almost 400,000
Industry Types
FUSES
And other circuit protection devices
• Polymeric PTC Resettable Fuses
• Gas Filled Surge Arresters
• Integrated Circuit Protectors
• Thermal Cut-Offs
• Metal Oxide Varistors
• Overvoltage Transient Suppressors
• SIDACS
• Thermal Circuit Breakers
NTE Switches
• Bat Handle
• Toggle and Mini-toggle
• Paddle
• Rocker
• Metal and Nylon Pushbutton
• Snap Action
• Sealed Automotive/Marine Types
• Anti-vandal
• Round Hole Rocker
• Pull Chain
• Waterproof
For more information,
call 973-748-5089 or
visit www.nteinc.com
NTE Electronics, Inc., 44 Farrand Street, Bloomfield, NJ 07003-2597
Fax: 973-748-6224 © Copyright July 2008
Distributed By:
EL74-01
Compliant product now
available on most items.
Now part of the NTE family
1ST EDITION
www.nteinc.com