1000V CERAMIC DISC 90000 SERIES The 90000 series is a range of insulated disc, monolythic fixed ceramic capacitors. They are most commonly used in consumer electronics and telecommunication equipment. RATINGS Capacitance Range: 1.0pf to 0.10µf (100,000pf) Voltage: 1000 Volts DC Withstand Voltage: 2500 Volts DC PERFORMANCE SPECIFICATIONS Operating Temperature Range: −25°C to +85°C (−13°F to +185°F) Tolerance Range: ±0.5pf ±10% +80%, −20% ±20% +80%, −20% 9001D0−9009D0 90010−90210 90212−90220 90222 90227−90410 Temperature Coefficient: 9001D0−90091 90110−90118 90122−90210 90212−90220 90222 90227−90410 − − − − − − SL Y5F Y5P Z5V Z5U Z5V 90000 Series Dimensions (Figure 2) Cap DØ S Cap DØ S Cap DØ S pf mm mm pf mm mm pf mm mm 1.0pf 5 7.5 39pf 5 7.5 1500pf 5 7.5 2.0pf 6 7.5 47pf 5 7.5 1800pf 6 7.5 2.2pf 5 7.5 56pf 5 7.5 2000pf 6 7.5 2.7pf 3.0pf 5 5 7.5 7.5 62pf 68pf 5 6 7.5 7.5 2200pf 2700pf 6 7 7.5 7.5 3.3pf 6 7.5 75pf 6 7.5 3000pf 7 7.5 4.0pf 5 7.5 82pf 6 7.5 3300pf 7 7.5 4.7pf 5 7.5 91pf 6 7.5 3900pf 7 7.5 5.0pf 5.6pf 5 5 7.5 7.5 100pf 120pf 5 5 7.5 7.5 4300pf 4700pf 7 8 7.5 7.5 6.2pf 5 7.5 150pf 5 7.5 5000pf 8 7.5 6.8pf 5 7.5 180pf 5 7.5 5600pf 8.5 7.5 7.5pf 8.0pf 5 6 7.5 7.5 220pf 270pf 5 6 7.5 7.5 6800pf 7500pf 10.5 10.5 7.5 7.5 9.0pf 5 7.5 330pf 6 7.5 8200pf 10.5 7.5 10pf 5 7.5 390pf 6 7.5 0.01µf 10.5 7.5 12pf 5 7.5 430pf 6 7.5 0.015µf 10.5 7.5 13pf 15pf 5 5 7.5 7.5 470pf 500pf 5 6 7.5 7.5 0.020µf 0.022µf 11.0 13.5 7.5 8.5 18pf 5 7.5 560pf 6 7.5 0.030µf 13.5 8.5 20pf 5 7.5 680pf 6 7.5 0.033µf 13.5 8.5 22pf 5 7.5 750pf 6 7.5 0.036µf 13.5 8.5 24pf 27pf 6 5 7.5 7.5 820pf 910pf 6 6 7.5 7.5 0.047µf 0.050µf 16.5 16.5 10.5 10.5 30pf 5 7.5 1000pf 5 7.5 0.10µf 20.0 10.5 33pf 5 7.5 1200pf 5 7.5 Insulation Resistance: 7500M Min measured after 1 Minute at rated voltage ORDERING INFORMATION 90 0 2D0 Series Multiplier Figure 2. DØ Capacitance in pf Example: 9002D0 = 2.0pf 90220 = 2000pf 90347 = 0.047µf MARKING EXAMPLE Example: 2pf = 2000pf = 0.047µf = 2 202 473 2.0 Figure 1 202 25.4 Min S ±0.8 46 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 All dimensions are in mm http://www.nteinc.com