Automotive Aftermarket Catalog

AUTOMOTIVE
AFTERMARKET
CIRCUIT
PROTECTION
CATALOG
AFTERMARKET
Genuine OEM Circuit Protection Products
LITTELFUSE® WORLDWIDE LEADER IN CIRCUIT PROTECTION
Circuit Protection Today
An overview of today’s fuse market . . .
•N
ew vehicles contain 90 to 150 fuses throughout the vehicle in 3
to 4 different fuse blocks. For example, the BMW 750i uses over
150 fuses.
•H
igh amperage products —
MAXI, MEGA, MIDI, and ZCASE fuses
— make up 1 out of every 5 fuses in new vehicles.
•T
he past decade has produced more automotive circuit
protection devices than the entire history of the industry.
•F
use and circuit breaker applications have grown by 400% in the
past 10 years.
Littelfuse partners with every major automotive and heavy-duty
OEM. That is why more than 95% of domestic and 70% of foreign
new vehicles contain Littelfuse fuses. (Your customers and
installers will have a Littelfuse fuse in their hand when they need
a source to replace a fuse.) Littelfuse has introduced every new
fuse in the industry for the past three decades, starting with the
ATO blade fuse. Littelfuse holds more than 130 patents on circuit
protection devices, more than all the other fuse manufacturers in
the world combined. Other fuse manufacturers are licensed by
Littelfuse to utilize its product designs and trademarks.
•G
lass fuses have not been used as a primary original equipment
circuit protection device since 1981. Unit m
ovement has been
steadily declining, although glass fuses are used in many
accessory applications.
What is Driving the
Circuit Protection Market?
The Circuit Protection market is experiencing accelerated growth
caused by a combination of powerful forces driving the market.
There has never been a better time to invest in the distribution of
the Circuit Protection category.
•O
ne Wire — One Fuse Protection Trend: Auto manufacturers are
moving towards protecting every wire in the vehicle.
•M
ore Power Consumption: Vehicles are consuming power at
higher amperages than ever before, and manufacturers are now
protecting high amp applications, such as the alternator, with
MEGA, MIDI, MAXI and ZCASE fuses.
•S
pace & Weight Efficiency: As vehicle designs get more complex,
fuses must get smaller so more fuses can fit in the same amount
of space.
•G
reater Diversity of Fuses: Vehicles contain more fuses than ever
before, so Aftermarket Customers and Installers are requiring
a greater variety of circuit p
rotection devices in their displays,
assortments and merchandisers.
•N
ew Market Niches: The increased demand in circuit p
rotection
is offering current channels of distribution new marketing
opportunities in the Fast Lube, Warehouse Club and Electrical
Accessories Installer channels or any outlet stocking electrical
replacement parts.
•L
onger Vehicle Life: The life expectancy of cars is increasing to
20+ years. This results in more miles d
riven and wiring that is
aging, leading to more blown fuses that need to be replaced.
•E
asier Access to Fuse Blocks: Auto manufacturers have moved
fuse blocks into the passenger compartments, e.g. glove box,
dashboard and trunk, making it easier for DIY replacement.
Fuseblocks are also better marked for easier identification of the
proper circuit.
• Infotainment: The increasing use of video and other new
electronics in vehicles have challenged designers to protect even
more sensitive automotive electronics. New technologies in
circuit protection and fuse box design eliminate transient surges
that can damage vehicle equipment.
•M
ore On-Board Electronics: Auto manufacturers and Aftermarket
suppliers are offering a broader range of on-board components
like cellular phones, DVD players, WI-FI, Bluetooth, navigation,
alarm systems and remote starters which require circuit
protection for installation and replacement.
The Future of Circuit Protection
Littelfuse’s new product development process is based on p
ractical
innovations designed around the needs of the customer. The
circuit protection products of the future will offer greater features
to protect increasingly complex electrical systems, meet the
booming demand for on-board electronics and make the Circuit
Protection category a continuously stronger part of the Automotive
Aftermarket.
•G
reater need for more technical training materials, point of sale
education support and more reliable application data.
Here is a glimpse of Littelfuse’s vision of circuit protection
for tomorrow . . .
•S
pecial circuit protection products designed for electric and
alternative fuel vehicles.
• Fuse count per vehicle to grow each year.
•M
odular electrical systems that require modular fuseblocks in
locations throughout the vehicle like the quarter panels, fender
wells, door panels, etc.
• Increased need for higher amp protection with MCASE and bolton devices like MEGA and MIDI fuses.
•M
ore compact fuses such as MINI, Micro and electronic s urface
mount fuses.
•S
mart circuit protection — the vehicle will tell you what fuse
needs to be replaced and its location.
•G
reater need for a broader range of fuse blocks and fuseholders,
testers and pullers, fuse kits and assortments and c reative
merchandising systems.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
From small beginnings, through decades of innovation in circuit protection,
to advancing beyond circuit protection.
85
YEARS
OF EXPERTISE
A History of Littelfuse Automotive Firsts
For more than 75 years, Littelfuse has been the Circuit Protection manufacturer to achieve the automotive industry’s most
significant accomplishments, beginning in 1927 by inventing electronic circuit protection technology with the first small
fast-acting protective fuse.
1930 – Automotive fuse introduced by Littelfuse.
1950– L
ittelfuse develops design of industry’s first c entralized
under dash fuseblock.
1976 – A
TO® blade fuse revolutionizes automotive circuit
protection.
1997 – L
ittelfuse celebrates 70 years of quality circuit p
rotection
innovation.
1999– L
ittelfuse acquires Harris Suppression and its
overvoltage technology to compliment it’s overcurrent
product lines.
1978 – Introduced Value Pak Emergency Fuse Kits offering 8–10
fuses with fuse puller.
2001 – T
he patented CablePro® is introduced to replace fuse links
in high-current, battery direct applications such as starters
or alternators.
1983 – L
ittelfuse begins battle with fuse counterfeiters
and helps establish a Federal exclusion order p
rohibiting
the importation of look-alike fuses into the United States.
ittelfuse acquires Semitron Industries, LTD and becomes
2002 – L
the only company in the world that can s upply all the major
circuit protection technologies.
1986 – U.S. Auto Industry selects the MAXI fuse to replace the
commonly used high amp fusible wire and fusible links in
under-the-hood electrical harnesses.
2004 – P
urchases majority ownership of Heinrich Industries
AG, including WICKMANN, Pudenz and Efen, to expand
European market for automotive and electronic circuit
protection
1987 – Littelfuse expands high amp coverage with reliable new
line of PAL Auto Links for complete Japanese c overage.
1988 – Littelfuse develops the ATO® style diode assembly
to control surge voltages caused by electromagnetic
components.
igh amp protection MEGA® fuse introduced as the first
1991 – H
OEM and Aftermarket fuse rated up to 250 amps.
1993 – T
he MINI® diode is introduced to perform omni-directional
blocking of current flow in automotive a
pplications.
1993 – T
he ATO® resistor assembly is released to adjust
and suppress excess voltage in sensitive automotive
circuits.
1993 – Littelfuse becomes the first circuit protection m
anufacturer
to receive ISO 9000 certification.
1994 – Littelfuse partners with Chrysler and BMW to design and
patent the MIDI® fuse for specific applications.
1994 – M
IDI® compact bolt-down automotive fuse introduced for
European high amp applications.
1995 – The MINI® resistor joins the Littelfuse line of Automotive
products.
1995 – Littelfuse introduced Circuit Alert – a blown fuse indicating
device for ATO® fuses.
1995 – Add-A-Circuit fuseholder introduced as new way to add an
additional circuit without cutting or splicing.
anufacturer to
1996 – Littelfuse became first circuit protection m
receive QS 9000 certification.
1997 – JCASE introduced as compact version of MAXI
Fuse for domestic autos beginning in 1998.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
2006 – Acquires SMARTGLOW® fuse, the first indicated automotive
blade type fuse.
2010 – Opens the High Power Lab, located in Champaign, Illinois,
providing customers with product design and specialized
testing services.
2010 – Acquires the Cole Hersee Company, a supplier of switches
and control devices to the commercial vehicle market.
2012 – Acquires ACCEL AB, located in Vänersborg, Sweden,
a leading supplier and manufacturer of advanced
electromechanical products and components, primarily for
the automotive industry.
2012 – Acquires Terra Power Systems, LLC, a Bellingham, WA –
based manufacturer of electrical distribution products for
heavy-duty vehicle applications.
2013 – Acquires Hamlin, Inc., of Lake Mills, WI. - a leader in
sensor technology providing product for teh automotive,
electronics, and industrial markets.
2015 – Acquires Sigmar, an Ozegna, Italy based manufacturer of
water-in-fuel and AdBlue®/urea sensors and PTC heaters,
solenoid valves and rotating oil filters for automotive and
commercial vehicle applications.
2016 – Acquires TE Connectivity’s Circuit Protection Division
(CPD) business, headquartered in Menlo Park, CA with
manufacturing facilities in Shanghai and Kunshan, China
and Tsukuba, Japan. It is a leader in polymer-based
resettable circuit protection devices in the automotive,
battery, industrial, communications and mobile computing
markets.
2016 – Acquires Menber’s Corporation of Legnano, Italy, expanding
our commercial vehicle presence and offering in Europe.
1
www.littelfuse.com
TABLE OF CONTENTS
FUSEOLOGY...............................................4-5
1
2
3
4
5
6
7
ATO® FUSES.................................................. 6
Developed by Littelfuse for the automotive industry, the ATO®
fuse has become the original equipment circuit protection
standard for foreign and domestic automobiles and trucks.
MINI® FUSES................................................ 8
Its miniature design meets the need for more circuits to be
protected while utilizing less space, and its ability to cope with
high temperatures in adverse environments makes the MINI®
Fuse the recommended choice for protection.
LOW PROFILE MINI® FUSES.................... 10
The Low Profile MINI® fuse has similar performance
characteristics as the standard MINI® fuse.
MICRO2™ / MICRO3™ FUSES............11-12
Its sub-miniature design meets the need for more circuits to
be protected while utilizing less space and its ability to cope
with high temperatures in adverse environments makes the
MICRO2TM and MICRO3TM Fuse the recommended choice for
protection.
MAXI FUSES............................................... 13
The MAXI fuse uses “Diffusion Pill Technology” to provide
predictable time delay characteristic and low heat dissipation.
JCASE® FUSES........................................... 15
The JCASE® is a cartridge style fuse with female terminal
design. JCASE® provides both increased time delay and low
voltage drop to protect high current circuits. JCASE® has the
ability to handle inrush currents. The JCASE® was designed
and patented by Littelfuse.
LOW PROFILE JCASE® FUSES................. 16
The Low Profile JCASE® fuse has similar performance
characteristics as the standard JCASE® fuse. The lower overall
height reduction allows for more space and weight savings
and also allows for a shorter male blade terminal, saving
additional weight and material savings in fuse box designs.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
8
9
10
11
MCASE+™ FUSES................................................ 17
It has a miniaturized footprint for optimal usage of space. It is a time
delayed fuse and can handle inrush currents. MCASE™ is designed and
patented by Littelfuse.
PAL AUTOLINK FUSES........................................ 18
Commonly found on many Japanese and Domestic built vehicles in
current ratings up to 140 amperes. Available with female connector,
male connector, bent connector and locking female connector. Color
coded to indicate amp rating.
GLASS FUSES....................................................... 19
AG and SFE fuses were designed into North American vehicles prior to
1981. Glass fuses are also used for auto accessory applications.
CIRCUIT BREAKERS............................................ 21
Type I – Automatic Reset
Cycles or continuously resets until the fault is corrected. Type I circuit
breakers are typically used to protect circuits which occasionally
experience momentary overloads such as wiper motor and headlamp
circuits where a self resetting device is preferred.
14
ZCASE FUSE.......................................................... 25
15
FUSE BLOCKS....................................................... 26
16
POWER FEED........................................................ 27
4
17
FUSE HOLDERS.................................................... 28
5
18
SWITCHES............................................................ 30
6
19
PULLERS / TESTERS............................................ 30
20
CNL/CNN FUSES.................................................. 31
FUSIBLE LINKS..................................................... 31
21
RETAIL
COMMERCIAL ASSORTMENT PACKS.............................. 32
CADDYS.................................................................................. 33
Type II – Modified Reset
Non-cycling, remains in open position while there is power to the
circuit. Resets when ignition is turned off. Type II circuit breakers are
typically used in applications where fuse replacement is objectionable,
such as power window, seat and sunroof circuits.
12
RED BOX................................................................................. 34
MODULAR RACK SYSTEMS................................................ 35
SUPER VALUE PACKS.......................................................... 36
2
3
7
8
9
10
11
12
13
Type III – Manual Reset
Manually resettable circuit breakers remain in the open position until a
button, lever or other external reset device is manually depressed. Type
III circuit breakers are typically used in applications where a manual
reset is desired for safe diagnosis of a circuit fault.
FUSE ASSORTMENTS.......................................................... 36
PLANOGRAM......................................................................... 38
14
MEGA® BOLT ON FUSES..................................... 24
REFERENCE
15
The MEGA® Fuse is designed for high current circuit protection up to
500A with “Diffusion Pill Technology.” The MEGA® Fuse also provides
time delay characteristics. Designed and patented by Littelfuse, the
MEGA® Fuse is ideal for battery and alternator protection application
and other heavy gauge cables requiring ultra-high current protection.
PACKAGING / PART NUMBERING..................................... 39
EMERGENCY KITS................................................................ 37
SYSTEM AND MARKETING NUMBERS............................ 40
FUSE SELECTION CHART.................................................... 41
CROSS REFERNCE GUIDE.................................................... 43
13
1
MIDI® BOLT ON FUSES....................................... 25
17
18
This MIDI® style fuse offers a bolt-on space saving fuse for high
current wiring protection and provides time delay characteristics with
“Diffusion Pill Technology”. The MIDI® was designed and patented by
Littelfuse.
19
LIttelfuse products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive
applications) not expressly set forth in applicable Littelfuse documentation. Warranties granted by Littelfuse shall be deemed void for
products used for any purpose not expressly set forth in applicable Littelfuse product documentation. Littelfuse shall not be liable for any
claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse
product documentation.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
16
3
www.littelfuse.com
20
21
FUSEOLOGY
Understanding how circuit protection works is a key to
diagnosing automotive electrical problems. When a fuse
blows, that means the fuse is doing its job — sending you a
message that something needs to be fixed.
WHAT IS THE PURPOSE OF A FUSE?
A fuse is a safety valve. It is designed to stop current from exceeding
the rating of the wires or components. Without fuses, excessive
current could cause damage to electrical systems, and even result in
fires.
In general, a fuse has a simple construction. The key c omponent is the
“element” — a short piece of metal wire or strap.
WHAT CAUSES A FUSE TO BLOW?
The element is designed to melt at a specific
temperature, to protect wires and equipment
from overcurrents. An o
vercurrent is any
current that exceeds the amperage r ating
or wiring capacity of equipment or devices
under normal conditions of use.
If an overcurrent causes the current in a circuit to rise
above a specific level — often the circuit’s rating — the heat produced
will melt the fuse’s element, causing the fuse to “blow.” This opens
the circuit and immediately stops the flow of current. Fuses are
designed to blow at temperatures far below those that would cause
damage or hazards.
Once a fuse is blown, it can be replaced to allow the
current to flow again. But simply replacing a fuse may
not be the solution to the problem. In fact, there is a chance the fuse
will just blow again, because the fuse is signaling a problem in the
system. Understanding the factors that cause a fuse to blow will help
you diagnose automotive electrical problems.
There are two types of overcurrents that can cause a fuse to blow:
overloads and short circuits.
Overload
What: The current exceeds the amperage at which the wires or
equipment are rated.
Why: Too many devices are connected to one circuit, or a device
malfunctions and draws higher than its normal o
perating current.
Sustained overloads cause overheating
of circuit components and the fuse blows.
Short Circuit
What: The current is out of its normal path.
Why: A malfunction creates an unintended path for e
lectricity to flow
from the battery or alternator to ground. This can be caused by the
touching of any positive wire to a ground wire, e.g. due to frayed
wire insulation, or tools laid across the positive and ground wires
of a circuit. The uncontrolled current to ground then surpasses the
normal resistance of the wire contained in the circuit, forcing higher
and higher current to the point of the generating heat which blows the
fuse.
Bold letter after fuse part number indicates fuse block location.
A Left fire wall
G Behind/under dash left
B Right fire wall H Behind/in glove box
C Right fender
J Behind/under dash right
D Right front
K Rear compartment
E Left front
IL In-line with device protected
F Left fender(locations may vary from car to car,
see your dealer.)
FINDING A FUSE
To be able to address fuse issues, you first must be able
to locate the appropriate fuse within the vehicle. In today’s
vehicles, each individual wire is protected by a circuit
protection device.
Fuses are contained in fuse blocks located at various points
throughout the vehicle. The diagram above illustrates typical
fuse block locations. For further help finding a fuse, use
the Littelfuse Automotive Fuse Guide, which lists a letter
corresponding to the fuse location for every fuse application
listed.
SELECTING THE RIGHT FUSE
Once you have found the fuse that has blown, and solved the
problem in the vehicle, you must replace the blown fuse with
an appropriate device.
When selecting the right fuse for replacement, you should
consider the following:
Physical Type
The replacement fuse must be of the same physical type as
the blown fuse being replaced. It must be of the same style
and have the same dimensions so that it can fit properly in
the fuse block or fuseholder. Check your owner’s manual to
determine the appropriate fuse type.
Installation Tip: Littelfuse holds patents for the designs on
most automotive fuses. It is important to remember that the
physical type of the fuse is important, but it is not the only
factor affecting the fuse’s function. Although some fuses
appear to be the same type and dimension as Littelfuse
fuses, they do not necessarily have the same performance
characteristics.
Look for the Littelfuse OEM Label
To guarantee the same level of quality in circuit protection
that the major automotive manufacturers of North America
require for their original equipment fuses, look for the
OEM seal on Littelfuse aftermarket products. Only Littelfuse
products can guarantee this level of quality.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Beware of Counterfeit Fuses
Voltage Rating
At first glance, it’s hard to tell the difference between a genuine
Littelfuse blade fuse and a counterfeit. The counterfeit may have
the same physical dimensions, but using it can be dangerous
because it fails to perform to the stringent performance and safety
specifications developed by Littelfuse and the OEMs.
The voltage rating, marked on every fuse, indicates the maximum
voltage at which the fuse is designed to operate safely if an
overcurrent occurs.
In many cases, the elements in counterfeit fuses do not
correspond with the amperage specification stamped on the fuse.
This will prevent the elements from opening at the rated or correct
amperage, which could result in an auto fire causing serious
damage to the vehicle, its contents and its passengers.
Responding to this growing problem, the United States
International Trade Commission and then President Ronald
Reagan issued and approved an exclusion order in 1983
prohibiting the importation of the look-alike blade fuses into the
United States. This order was initiated because many of these
fuses were proven to be totally unsafe. The photos shown here
indicate why counterfeit fuses are potentially unsafe and present a
fire risk.
To guarantee quality and safety, look for the Littelfuse name on
fuses and fuse packaging.
Current Rating — Amperage
The current rating, marked on every fuse, is the maximum current
in amperes that the fuse can continuously carry under specified
conditions.
Tip: When selecting a fuse, make sure the current rating of the
fuse is the same amperage as the circuit. You can obtain the
current rating of a circuit by looking in the owner’s manual of
the vehicle; checking to see if it is w
ritten on the fuse block; or
consulting the Littelfuse Fuse Guide.
Overfusing and Underfusing
Overfusing is when the fuse has a current rating higher than
the rating of the circuit. In this case, the fuse will not be able
to protect the circuit properly because the circuit could reach
overcurrent levels, causing damage and safety hazards, before
the fuse would blow.
Tip: The fuse voltage rating must equal to or exceed this c ircuit
voltage where the fuse is installed. This is not a p
roblem in fuse
selection because automotive fuse a
pplications are typically
around 12 volts, while the voltage rating of the majority of
Littelfuse automotive fuses — including ATO Fuse, MINI Fuse,
MAXI Fuse and MEGA Fuse — is 32 volts.
ADDING A CIRCUIT
Always use a circuit protection device with a fuseholder or fuse
block whenever adding additional circuits to ensure optimal safety.
The fastest, easiest option for installers who need to add a circuit
for applications such as electronic components, is Littelfuse’s
Add-A-Circuit Fuseholder. Add-A-Circuit, available in ATO® and
MINI® blade fuse versions, is designed to facilitate installation of
fuses for accessories of 10 amps or less. The Add-A-Circuit adapts
the fuse block to the installer’s needs, quickly turning one slot in
the fuse block into two, providing a safe, economical alternative to
splicing or fusetaps.
Caution: Fusetaps are not a recommended alternative for adding
circuits because they can overstress the terminals in the fuse
block. This situation can create a loose fitting fuse, which in turn
produces excessive heat, which can cause nuisance blows, even
melting of the fuse and fuse block and possibly an expensive
repair in the future. When a fusetap is used, in many cases there
is no fuse protecting the new circuit, a condition which can also
present a hazard.
Another alternative to adding a circuit is the
Littelfuse Battery Power Feed. This device
attaches directly to the b
attery terminal, allowing
the addition of up to three circuits. Then use an
in-line fuseholder to protect the circuit properly.
Underfusing is when the fuse is rated at a current too far below
the rating of the circuit. In this case the fuse will blow, even
though the circuit is functioning normally without an overcurrent.
Underfusing almost guarantees that a fuse will blow repeatedly.
This is referred to as a nuisance blow.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
5
www.littelfuse.com
ATO® (Autofuse®) Blade Fuse
Developed by Littelfuse for the automotive industry, the ATO® fuse has become the original equipment circuit
protection standard for foreign and domestic automobiles and trucks. Readily identifiable and easily replaced, this
fuse can be specified for a variety of low voltage electronic applications. It is currently found on most cars, trucks,
buses and off the road vehicles worldwide. Features Littelfuse designed industry standard color coding to indicate
amp rating.
Voltage Rating Characteristics: 32V AC/DC Fast-Acting
Approvals: UL listed, CSA certified 3-30A, SAE J1284.
Opening Time
Min / Max (s)
100
35-40
360,000 s / –
110
1-30
360,000 s / –
135
1-2
3-40
350ms /600 s
0.750 s / 600 s
200
1-2
3-40
100 ms/5.0 s
0.150 s / 5.0 s
1-2
3-40
1-30
35-40
20 ms / 500 ms
80 ms / 500 ms
–/ 100 ms
–/ 150 ms
350
600
TEMPERATURE RERATING CURVE
COLOR
CODE
CURRENT
RATING (A)
ATO® FUSE TABLE
Plus Pack
BOXED
MATERIAL
#
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
CARDED
MATERIAL
#
Black
1A
0ATO001.V
ATO1
0ATO001.VP
ATO1BP
0ATO001.ZXPRO
Gray
2A
0ATO002.V
ATO2
0ATO002.VP
ATO2BP
0ATO002.ZXPRO
Violet
3A
0ATO003.V
ATO3
0ATO003.VP
ATO3BP
0ATO003.ZXPRO
Pink
4A
0ATO004.V
ATO4
0ATO004.VP
ATO4BP
0ATO004.ZXPRO
Tan
5A
0ATO005.V
ATO5
0ATO005.VP
ATO5BP
0ATO005.ZXPRO
Brown
7.5A
0ATO07.5V
ATO7.5
0ATO07.5VP
ATO7.5BP
0ATO07.5ZXPRO
Red
10A
0ATO010.V
ATO10
0ATO010.VP
ATO10BP
0ATO010.ZXPRO
Blue
15A
0ATO015.V
ATO15
0ATO015.VP
ATO15BP
0ATO015.ZXPRO
Yellow
20A
0ATO020.V
ATO20
0ATO020.VP
ATO20BP
0ATO020.ZXPRO
Clear
25A
0ATO025.V
ATO25
0ATO025.VP
ATO25BP
0ATO025.ZXPRO
Green
30A
0ATO030.V
ATO30
0ATO030.VP
ATO30BP
0ATO030.ZXPRO
Orange
40A
0ATO040.V
ATO40
0ATO040.VP
ATO40BP
---
www.littelfuse.com
7.5A
10A
15A
20A
25A
30A
35A
40A
Opening
Time
3A
4A
5A
% of Rating
TIME-CURRENT
CHARACTERISTIC CURVES
2A
TIME-CURRENT CHARACTERISTICS
1A
DIMENSIONS ATO®
6
©2016 Littelfuse Automotive Aftermarket Circuit Protection
1
ATO® Smart Glow Blade Fuse
Smart Glow fuses are innovative automotive style fuses that feature an indicator light that glows when the fuse is
blown, saving time to troubleshoot an open circuit.
Interrupting Rating: 1000A @32VDC
Voltage Rating: 32 VDC
Operating Temperature Range: -40˚C to +125˚C
Terminals: Tin plated Zinc alloy
Opening Time
Min / Max (s)
100
35-40
360,000 s / –
110
1-30
360,000 s / –
135
1-2
3-40
350ms /600 s
0.750 s / 600 s
1-2
3-40
1-2
3-40
1-30
35-40
100 ms/5.0 s
0.150 s / 5.0 s
20 ms / 500 ms
80 ms / 500 ms
–/ 100 ms
–/ 150 ms
200
350
600
7.5A
10A
15A
20A
25A
30A
35A
40A
Opening
Time
3A
4A
5A
% of Rating
TIME-CURRENT
CHARACTERISTIC CURVES
2A
TIME-CURRENT CHARACTERISTICS
1A
DIMENSIONS
TEMPERATURE RERATING CURVE
CURRENT
RATING (A)
ATO® SMART GLOW FUSE TABLE
MATERIAL
#
Black
1A
---
---
Gray
2A
---
---
Violet
3A
OAT0003.VPGLO
10-0003
Pink
4A
---
---
Tan
5A
OAT0005.VPGLO
10-1000
Brown
7.5A
OAT007.5VPGLO
10-0007
Red
10A
OAT0010.VPGLO
10-1001
Blue
15A
OAT0015.VPGLO
10-1002
Yellow
20A
OAT0020.VPGLO
10-1003
CODE
CARDED
CATALOG
#
Clear
25A
OAT0025.VPGLO
10-1004
Green
30A
OAT0030.VPGLO
10-1005
Orange
40A
---
---
©2016 Littelfuse Automotive Aftermarket Circuit Protection
®
Fuse
COLOR
7
www.littelfuse.com
MINI® Blade Fuse
The MINI® Fuse is quickly becoming the new standard for vehicle circuit protection. Its miniature design
meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high
temperatures in adverse environments makes the MINI® Fuse the recommended choice for protection.
Voltage Rating Characteristics: 32V AC/DC Fast-Acting
Approvals: UL listed, SAE J2077.
TIME-CURRENT CHARACTERISTICS
DIMENSIONS MINI®
% of Rating
Opening Time
Min / Max (s)
110
360,000 s / –
135
0.75 s / 600 s
200
0.15 s / 5 s
350
0.080 s / 0.250 s
600
0.030 s / 0.100 s
TIME-CURRENT
CHARACTERISTIC CURVES
TEMPERATURE RERATING CURVE
MINI® FUSE TABLE
CURRENT
RATING (A)
Plus Pack
MATERIAL
#
Gray
2A
0MIN002.V
MIN2
0MIN002.VP
MIN2BP
0MIN002.ZXPRO
Violet
3A
0MIN003.V
MIN3
0MIN003.VP
MIN3BP
0MIN003.ZXPRO
Pink
4A
0MIN004.V
MIN4
0MIN004.VP
MIN4BP
0MIN004.ZXPRO
Tan
5A
0MIN005.V
MIN5
0MIN005.VP
MIN5BP
0MIN005.ZXPRO
Brown
7.5A
0MIN07.5V
MIN7.5
0MIN07.5VP MIN7.5BP
0MIN07.5ZXPRO
Red
10A
0MIN010.V
MIN10
0MIN010.VP
MIN10BP
0MIN010.ZXPRO
Blue
15A
0MIN015.V
MIN15
0MIN015.VP
MIN15BP
0MIN015.ZXPRO
Yellow
20A
0MIN020.V
MIN20
0MIN020.VP
MIN20BP
0MIN020.ZXPRO
Clear
25A
0MIN025.V
MIN25
0MIN025.VP
MIN25BP
0MIN025.ZXPRO
Green
30A
0MIN030.V
MIN30
0MIN030.VP
MIN30BP
0MIN030.ZXPRO
COLOR
CODE
www.littelfuse.com
BOXED
CARDED
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
MATERIAL
#
8
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MINI® Smart Glow Blade Fuse
Smart Glow fuses are innovative automotive style fuses that feature an indicator light that glows when the fuse is
blown, saving time to troubleshoot an open circuit.
Interrupting Rating: 1000A @32VDC
Voltage Rating: 32 VDC
Operating Temperature Range: -40˚C to +125˚C
Terminals: Tin plated Zinc alloy
DIMENSIONS
TIME-CURRENT CHARACTERISTICS
% of Rating
Opening Time
Min / Max (s)
110
360,000 s / –
135
0.75 s / 600 s
200
0.15 s / 5 s
350
0.080 s / 0.250 s
600
0.030 s / 0.100 s
TIME-CURRENT
CHARACTERISTIC CURVES
TEMPERATURE RERATING CURVE
CURRENT
RATING (A)
MINI® FUSE TABLE
MATERIAL
#
Gray
2A
---
---
Violet
3A
OMIN003.VPGLO
11-0003
Pink
4A
---
---
Tan
5A
OMIN005.VPGLO
11-1000
Brown
7.5A
OMIN07.5VPGLO
11-0007
11-1001
CODE
CARDED
CATALOG
#
Red
10A
OMIN010.VPGLO
Blue
15A
OMIN015.VPGLO
11-1002
Yellow
20A
OMIN020.VPGLO
11-1003
Clear
25A
OMIN025.VPGLO
11-1004
Green
30A
OMIN030.VPGLO
11-1005
©2016 Littelfuse Automotive Aftermarket Circuit Protection
®
Fuse
COLOR
9
www.littelfuse.com
2
Low Profile MINI® Blade Fuse
The Low Profile MINI® fuse is designed to mate with tuning-fork terminals, which provides additional weight and
material savings in fuse box designs by eliminating the need for female box terminals.
Voltage Rating: 58 VDC
Interrupting Rating: 1000A @ 58 VDC
Operating Temperature Range: -40˚C to +125˚C
Terminals: either Ag or Sn plated zinc
Housing Materials: Nylon composite
DIMENSIONS
TIME-CURRENT
CHARACTERISTIC CURVES
TEMPERATURE RERATING CURVE
TIME-CURRENT CHARACTERISTICS
Opening Time
Min / Max (s)
% of Rating
110
360,000 s / –
135
0.750 s / 120 s
200
0.150 s / 5 s
350
0.080 s / 0.250 s
600
0.030 s / 0.100 s
LOW PROFILE MINI® FUSE TABLE
CODE
Gray
CURRENT
RATING (A)
COLOR
Plus Pack
MATERIAL
#
CATALOG
#
MATERIAL
#
CATALOG
#
MATERIAL
#
2A
LMIN002.V
LMIN2
---
---
--LMIN005.ZXPROA
BOXED
CARDED
CARDED
Tan
5A
LMIN005.V
LMIN5
LMIN005.VP
LMIN005BP
Brown
7.5A
LMIN07.5V
LMIN7.5
---
---
---
Red
10A
LMIN010.V
LMIN10
LMIN010.VP
LMIN010BP
LMIN010.ZXPROA
Blue
15A
LMIN015.V
LMIN15
LMIN015.VP
LMIN015BP
LMIN015.ZXPROA
Yellow
20A
LMIN020.V
LMIN20
LMIN020.VP
LMIN020BP
LMIN020.ZXPROA
Clear
25A
LMIN025.V
LMIN25
LMIN025.VP
LMIN025BP
LMIN025.ZXPROA
Green
30A
LMIN030.V
LMIN30
LMIN030.VP
LMIN030BP
LMIN030.ZXPROA
www.littelfuse.com
10
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MICRO2™ Blade Fuse
The MICRO2TM Fuse is the new standard for vehicle circuit protection. Its sub-miniature design meets the need
for more circuits to be protected while utilizing less space and its ability to cope with high temperatures in
adverse environments makes the MICRO2TM Fuse the recommended choice for protection.
3
Voltage Rating: 32 VDC
Interrupting Ratings: 1000A @ 32 VDC
Operating Temperature Range: -40˚C to +125˚C
DIMENSIONS
4
TEMPERATURE RERATING CURVE
TIME-CURRENT CHARACTERISTICS
% of Rating
Opening Time
Min / Max (s)
110
135
160
200
350
600
100 h / –
0.75 s / 120 s
0.30 s / 50 s
0.150 s / 5 s
0.04 s / 0.50 s
0.02 s / 0.100 s
TIME-CURRENT
CHARACTERISTIC CURVES
100.00
5
7.5
10
15
20
25
30
Time (s)
10.00
1.00
0.10
0.01
1
10
100
1000
Current (A)
COLOR
CODE
CURRENT
RATING (A)
MICRO2™ FUSE TABLE
BULK 4000 PC
BULK 500 PC
BULK 50 PC
BOXED 5 PC
CARDED 5 PC
MATERIAL
#
MATERIAL
#
MATERIAL
#
MATERIAL
#
MATERIAL
#
Tan
5A
0327005.ZXS
0327005.UXS
0327005.LXS
MIC2005.V
MIC2005.VP
Brown
7.5A
032707.5ZXS
032707.5UXS
032707.5LXS
MIC207.5V
MIC207.5VP
Red
10A
0327010.ZXS
0327010.UXS
0327010.LXS
MIC2010.V
MIC2010.VP
Blue
15A
0327015.ZXS
0327015.UXS
0327015.LXS
MIC2015.V
MIC2015.VP
Yellow
20A
0327020.ZXS
0327020.UXS
0327020.LXS
MIC2020.V
MIC2020.VP
Clear
25A
0327025.ZXS
0327025.UXS
0327025.LXS
MIC2025.V
MIC2025.VP
Green
30A
0327030.ZXS
0327030.UXS
0327030.LXS
MIC2030.V
MIC2030.VP
©2016 Littelfuse Automotive Aftermarket Circuit Protection
11
www.littelfuse.com
Blade Fuses
Blade Fuses
MICRO3™ BLADE FUSE 32V
E 32V
Blade Fuses
RO3 ™ BLADE FUSE 32V
MICRO3™ Blade Fuse
Specifications
Voltage Rating:
Interrupting Ratings:
Operating Temperature Range:
32 VDC
1000A @ 32 VDC
-40˚C to +125˚C
Time-Current Characteristic Curves
Specifications
The MICRO3TM
Fuse is the new standard for vehicle circuit protection. The MICRO3TM Fuse has 3 terminals and
32 VDC
2 fuse elements with
center terminal. Its sub-miniature design meets the need for more circuits to be
1000Aa@ common
32 VDC
-40˚C to +125˚C
protected
while utilizing
less space and its ability to cope with high temperatures in adverse environments makes
Package Size
the2000MICRO3TM Fuse the recommended choice for protection.
Voltage Rating:
Interrupting Ratings:
Operating Temperature Range:
Ordering Information
Part Number
0337xxx.PXS
Ordering Information
Voltage Rating: 32 VDC
Part Number
Package Size
Interrupting Ratings: 1000A @ 32 VDC
0337xxx.PXS
2000
Operating Temperature Range:
-40˚C to +125˚C
Dimensions
Dimensions in mm
circuit protec
e elements
n meets
less space
ription
e environ
TM
O3 choice
Fuse
ded
for is the new standard for vehicle circuit protec
TM
MICRO3
Fuse has 3 terminals and 2 fuse elements
mmon center terminal. Its sub-miniature design meets
or more circuits to be protected while utilizing less space
ility to cope with high temperatures in adverse environ
TM
kes the MICRO3
Fuse the recommended choice for
.
Dimensions
Dimensions in mm
DIMENSIONS
TIME-CURRENT CHARACTERISTICS
-
-
e (Min / Max)
h/–
-Current
Characteristics
120 sec
50 sec
of Rating
Blade Fuses
Opening Time (Min / Max)
/ 5 sec
0.50110
sec
110
135
160
200
350
600
100 h / –
0.75 s / 120 s
0.30 s / 50 s
0.150 s / 5 s
0.04 s / 0.50 s
0.02 s / 0.100 s
100 h / –
0.30 sec / 50 sec
200
0.15 sec / 5 sec
350
0.04 sec / 0.50 sec
600
Temperature Rerating Curve
0.02 sec / 0.100 sec
Housing Color
Typ. Voltage DropCharacteristic
(mV) Cold Resistance
Time-Current
Curves(mΩ)
I2t (A2s)
TIME-CURRENT CHARACTERISTIC CURVES
116
gs
106
Current Rating (A)102
17.4
17
10.8
47
Housing Color 7.7 Typ. Voltage Drop (mV)
89
94
4.8
337005._
5
33707.5_
7.5
106
10
102
337010._
337015._
Opening Time
Min / Max (s)
0.75 sec / 120 ™
sec BLADE FUSE 32V
MICRO3
135sec
.100
160
rt Number
% of Rating
4
15
116
Cold Resistance (mΩ)
189
94
© 2010 Littelfuse • Transportation Products Catalog
4
lfuse.com
TEMPERATURE RERATING CURVE
I2t (A2s)
17.4
17
10.8
47
7.7
89
4.8
189
© 2010 Littelfuse • Transportation Products Catalog
Temperature Rerating Curve
COLOR
CODE
CURRENT
RATING (A)
MICRO3™ FUSE TABLE
© 2010 Littelfuse • Transportation
Products Catalog
BULK 2000 PC
BULK 50 PC
BOXED 5 PC
CARDED 5 PC
MATERIAL
#
MATERIAL
#
MATERIAL
#
MATERIAL
#
Tan
5A
0337005.PXS
0337005.LXS
MIC3005.V
MIC3005.VP
Brown
7.5A
033707.5PXS
033707.5LXS
MIC307.5V
MIC307.5VP
Red
10A
0337010.PXS
0337010.LXS
MIC3010.V
MIC3010.VP
Blue
15A
0337015.PXS
0337015.LXS
MIC3015.V
MIC3015.VP
© 2010 Littelfuse • Transportation
Products Catalog
www.littelfuse.com
5
5
www.littelfuse.com
12
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MAXI Blade Fuse
The MAXI fuse uses “Diffusion Pill Technology” to provide predictable time delay characteristic and low heat
dissipation. MAXI Fuses are primarily used for under hood applications and are produced with a high temperature
polymer and s ilver plated blades. They replace the commonly used fusible wire or fusible link to protect a high
current segment or system of the wiring harness. Features Littelfuse designed industry standard color coding to
indicate amp rating.
Voltage Rating: 32 VDC
Interrupting Ratings: 1000A @ 32 VDC
4
Operating Temperature Range: -40˚C to +125˚C
Terminals: Ag plated
5
MAXI Smart Glow Blade Fuse
Smart Glow fuses are innovative automotive style fuses that feature an indicator light that glows when the fuse is
blown, saving time to troubleshoot an open circuit.
Voltage Rating: 32 VDC
Interrupting Ratings: 1000A @ 32 VDC
Fuse
®
Operating Temperature Range: -40˚C to +125˚C
Terminals: Ag plated
DIMENSIONS
TIME-CURRENT CHARACTERISTICS
% of Rating
Opening Time
Min / Max (s)
110
360,000 s / –
135
60 s / 1,800 s
200
2 s / 60 s
350
0.20 s / 7 s
600
0.040 s / 1 s
TIME-CURRENT
CHARACTERISTIC CURVES
TEMPERATURE RERATING CURVE
©2016 Littelfuse Automotive Aftermarket Circuit Protection
13
www.littelfuse.com
MAXI Blade Fuse
MAXI Blade Fuse
Fuse
®
COLOR
CODE
CURRENT
RATING (A)
MAXI FUSE TABLE
BOXED
MATERIAL
#
CARDED
CATALOG
#
MATERIAL
#
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
Yellow
20A
0MAX020.X
MAX20
0MAX020.XP
MAX20BP
0MAX020.XPGLO
30-1020
Green
30A
0MAX030.X
MAX30
0MAX030.XP
MAX30BP
0MAX030.XPGLO
30-1030
Orange
40A
0MAX040.X
MAX40
0MAX040.XP
MAX40BP
0MAX040.XPGLO
30-1040
Red
50A
0MAX050.X
MAX50
0MAX050.XP
MAX50BP
0MAX050.XPGLO
30-1050
Blue
60A
0MAX060.X
MAX60
0MAX060.XP
MAX60BP
0MAX060.XPGLO
30-1060
Tan
0MAX070.XPGLO
30-1070
70A
0MAX070.X
MAX70
---
---
Clear
80A
0MAX080.X
MAX80
0MAX080.XP
MAX80BP
0MAX080.XPGLO
30-1080
Purple
100A
---
---
---
---
0MAX100.XPGLO
30-1100
www.littelfuse.com
14
©2016 Littelfuse Automotive Aftermarket Circuit Protection
JCASE® High Amp Fuse
The JCASE® is a cartridge style fuse with female terminal design. JCASE® provides both increased time delay and
low voltage drop to protect high current circuits. JCASE® has the ability to handle inrush currents. Littelfuse patented
high current fuse introduced in 1997 designed to replace the MAXI fuse and cartridge style fuses. Currently OEM
on many new domestic and Japanese models. Smaller space saving footprint is being designed in by many OEM’s.
Patented technology p
rovides both increased time delay and low voltage drop. Features ANSI standard OCR-A

font
for visual inspection systems, double spring-beam box terminal and unique secondary locking feature holds terminal
firmly in place.
Voltage Rating Characteristics: 32V AC/DC Slo-Blo®
Interrupting Ratings: 1000A @ 32 VDC
Operating Temperature Range: -40˚C to +125˚C
5
Insertion Force: 53N max. (12lb)
Extraction Force: 9N min. (2lb)
DIMENSIONS
TIME-CURRENT CHARACTERISTICS
Opening Time
Min / Max (s)
% of Rating
100
360,000 s / –
135
60 s / 1800 s
200
4 s / 60 s
350
0.200 s / 7 s
600
0.040 s / 1 s
6
TIME-CURRENT
CHARACTERISTIC CURVES
TEMPERATURE RERATING CURVE
CURRENT
RATING (A)
JCASE® FUSE TABLE
MATERIAL
#
Blue
20A
JCAS020.X
JCAS20
JCAS020.XP
JCAS20BP
White
25A
JCAS025.X
JCAS25
JCAS025.XPA
JCAS25BP
Pink
30A
JCAS030.X
JCAS30
JCAS030.XP
JCAS30BP
Green
40A
JCAS040.X
JCAS40
JCAS040.XP
JCAS40BP
Red
50A
JCAS050.X
JCAS50
JCAS050.XP
JCAS50BP
Yellow
60A
JCAS060.X
JCAS60
JCAS060.XP
JCAS60BP
COLOR
CODE
BOXED
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
©2016 Littelfuse Automotive Aftermarket Circuit Protection
15
JCASE
LP JCASE
MCASE™
www.littelfuse.com
®
® Fuse
Low Profile JCASE
JCASE High Amp Fuse
The Low Profile JCASE® fuse has similar performance characteristics as the standard JCASE® fuse. The lower
overall height reduction allows for more space and weight savings and also allows for a shorter male blade
terminal, saving additional weight and material in fuse box designs. Smaller space saving footprint is being
designed in by many OEM’s. Patented technology p
rovides both increased time delay and low voltage drop.
Features ANSI standard OCR-A

font for visual inspection systems, double spring-beam box terminal and unique
secondary locking feature holds terminal firmly in place.
VVoltage Rating: 58 VDC
Interrupting Rating: 1000A @ 58 VDC
Operating Temperature Range: -40˚C to + 125˚C
Insertion Force: 53N Max. (12 lb.)
Extraction Force: 9N Min (2 lb.)
DIMENSIONS
TIME-CURRENT CHARACTERISTICS
TIME-CURRENT CHARACTERISTIC CURVES
Opening Time
Min / Max (s)
% of Rating
100
360,000 s / –
135
60 s / 1800 s
200
4 s / 60 s
350
0.200 s / 7 s
600
0.040 s / 1 s
TEMPERATURE RERATING CURVE
CURRENT
RATING (A)
LOW PROFILE JCASE® FUSE TABLE
MATERIAL
#
Blue
20A
LJCA020.X
LJCA20
LJCA020.XP
White
25A
LJCA025.X
LJCA25
LJCA025.XPA
---
Pink
30A
LJCA030.X
LJCA30
LJCA030.XP
LJCA30BP
Green
40A
LJCA040.X
LJCA40
LJCA040.XP
LJCA40BP
Red
50A
LJCA050.X
LJCA50
LJCA050.XP
LJCA50BP
LJCA060.X
LJCA60
LJCA060.XP
LJCA60BP
COLOR
CODE
Yellow
60A
www.littelfuse.com
BOXED
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
LJCA20BP
16
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MCASE+™ Fuse
The Unslotted MCASE+™ Fuse is a cartridge style fuse up to 40A with female terminals for 2.8 mm male terminals.
The Slotted MCASE+™ Fuse is available in amperages up to 60A and can mate with larger male terminals (e.g.,
6.3mm) or even mount directly to onto a busbar. It has a miniaturized footprint for optimal usage of space. It is a time
delayed fuse and can handle inrush currents.
Voltage Rating: 32 VDC
Interrupting Ratings: 1000A @ 32 VDC
Operating Temperature Range: -40˚C to +125˚C
Fuse Insertion Force: 50N (11.2lbf) Typical
Extraction Force: 4N Min. (0.9 lb). | 24.5N Max. (5.5 lb)
135
60 s / 1800 s
200
2 s / 60 s
7
50A
60A
100 hrs / –
40A
110
1000
30A
Opening Time
Min / Max (s)
15A
% of Rating
25A
SLOTTED
20A
MCASE FUSE TIME‐CURRENT CHARACTERISTIC CURVES
TIME-CURRENT
CHARACTERISTIC CURVES
TIME-CURRENT CHARACTERISTICS
DIMENSIONS
8
100
350
0.2 s / 7 s
600
0.04 s / 1 s
TIME IN SECONDS
10
TEMPERATURE RERATING CURVE
UNSLOTTED
1
Rerating
Factor
110 %
105 %
0.1
100 %
95 %
0.01
10
85 %
100
1000
10000
CURRENT IN AMPERES
CURRENT IN AMPERES
90 %
-50
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
130
Temperature [oC]
COLOR
SLOTTED
CODE
CURRENT
RATING (A)
MCASE+™ FUSE TABLE
BULK 2000 PC
BULK 500 PC
BOXED 1 PC
CARDED
MATERIAL
#
MATERIAL
#
MATERIAL
#
MATERIAL
#
MCAS015.XP
Gray
15A
0695015.PXP
0695015.U
MCAS015.X
Blue
20A
0695020.PXP
0695020.U
MCAS020.X
MCAS020.XP
White
25A
0695025.PXP
0695025.U
MCAS025.X
MCAS025.XP
Pink
30A
0695030.PXP
0695030.U
MCAS030.X
MCAS030.XP
Green
40A
0695040.PXP
0695040.U
MCAS040.X
MCAS040.XP
Red
50A
0695050.PXPS
0695050.U
---
---
Yellow
60A
0695060.PXPS
0695060.U
---
---
©2016 Littelfuse Automotive Aftermarket Circuit Protection
17
www.littelfuse.com
PAL Auto Link Fuses
Commonly found on many Japanese and Domestic built v ehicles in current ratings up to 140 amperes.
Available with female connector, male connector, bent connector and locking female connector. Color coded
to indicate amp rating.
A
B
C. AUTO LINK PAL 13/16” BENT MALE TERMINAL
Pink
30A
0PAL230.X
PAL230
0PAL230.XP
PAL230BP
Green
40A
0PAL240.X
PAL240
0PAL240.XP
PAL240BP
PAL250BP
CODE
F
CURRENT
RATING (A)
A. AUTO LINK PAL FEMALE TERMINAL
MATERIAL
#
Blue
20A
0PAL020.X
PAL020
0PAL020.XP
PAL020BP
COLOR
CODE
BOXED
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
0PAL250.X
PAL250
0PAL250.XP
60A
0PAL260.X
PAL260
0PAL260.XP
PAL260BP
Brown
70A
0PAL270.X
PAL270
0PAL270.XP
PAL270BP
Black
80A
0PAL280.X
PAL280
0PAL280.XP
PAL280BP
Blue
100A
0PAL2100X
PAL2100
0PAL2100XP
PAL2100BP
Gray
120A
0PAL2120X
PAL2120
0PAL2120XP
PAL2120BP
Purple
140A
---
---
0PAL2140XP
PAL2140BP
D. AUTO LINK PAL MINI FEMALE TERMINAL
PAL030
0PAL030.XP
PAL030BP
0PAL040.X
PAL040
0PAL040.XP
PAL040BP
COLOR
Red
50A
0PAL050.X
PAL050
0PAL050.XP
PAL050BP
CODE
Yellow
60A
0PAL060.X
PAL060
0PAL060.XP
PAL060BP
Yellow
CURRENT
RATING (A)
60A
MATERIAL
#
Pink
30A
0PAL330.X
PAL330
0PAL330.XP
PAL330BP
Green
40A
0PAL340.X
PAL340
0PAL340.XP
PAL340BP
CARDED
COLOR
MATERIAL CATALOG
#
#
MATERIAL
#
CATALOG
#
0PAL130.X
0PAL130.XP
PAL130BP
Pink
PAL160BP
Green
0PAL160.X
PAL130
PAL160
0PAL160.XP
CARDED
CATALOG
#
MATERIAL
#
CATALOG
#
E. AUTO LINK PAL 9/16” BENT MALE TERMINAL
B. AUTO LINK PAL STRAIGHT MALE TERMINAL
30A
BOXED
CURRENT
RATING (A)
0PAL030.X
40A
Pink
CATALOG
#
50A
30A
CODE
MATERIAL
#
Red
Pink
BOXED
CATALOG
#
Yellow
Green
COLOR
CARDED
MATERIAL
#
COLOR
D
BOXED
CURRENT
RATING (A)
E
CODE
CURRENT
RATING (A)
C
MATERIAL
#
CATALOG
#
MATERIAL
#
CATALOG
#
30A
0PAL430.X
PAL430
0PAL430.XP
PAL430BP
40A
0PAL440.X
PAL440
0PAL440.XP
PAL440BP
PAL450BP
BOXED
CARDED
Black
80A
0PAL180.X
PAL180
0PAL180.XP
PAL180BP
Red
50A
0PAL450.X
PAL450
0PAL450.XP
Blue
100A
0PAL1100X
PAL1100
0PAL1100XP
PAL1100BP
Black
80A
0PAL480.X
PAL480
0PAL480.XP
PAL480BP
Gray
120A
0PAL1120X
PAL1120
0PAL1120XP
PAL1120BP
Blue
100A
0PAL4100X
PAL4100
0PAL4100XP
PAL4100BP
White
120A
---
---
0PAL4120XP
PAL4120BP
Purple
140A
---
---
0PAL4140XP
PAL4140BP
CURRENT
RATING (A)
F. AUTO LINK PAL LOCKING FEMALE TERMINAL
MATERIAL
#
Brown
25A
0PAL525.X
PAL525
0PAL525.XP
PAL525BP
Green
30A
0PAL530.X
PAL530
0PAL530.XP
PAL530BP
COLOR
CODE
www.littelfuse.com
18
BOXED
CARDED
CATALOG MATERIAL
#
#
CATALOG
#
©2016 Littelfuse Automotive Aftermarket Circuit Protection
GLASS Fuses
AG and SFE fuses were designed into North American vehicles prior to
1981. Glass fuses are also used for auto accessory applications.
AG Fuses
SFE Fuses
GBC Fuses
Originally stood for “all glass.”
The automotive industry uses
the “AG” prefix (AGC, AGW)
for most glass fuses. They
vary in length, diameter and
amperage rating.
Glass fuses designed to specifications set
by the Society of Fuse Engineers. All are 1/4
inch in diameter, but vary in length according
to the ampere rating to ensure accurate fuse
replacement.
Voltage Rating: 32V AC/DC
250V may be substituted
A thermoplastic type, torpedo shaped
fuse that can be currently found in
many European cars. Consisting
of a heat resistant body, the fuse
element stretches over the exterior
of the body from end to end. The
bodies vary in color (by amperage)
to ensure proper replacement.
Voltage Rating: 32V AC/DC
250V may be substituted
Voltage Rating: 32V AC/DC
AGA, SFE4
(1/4” x 5/8”)
SFE6
(1/4” x 3/4”)
AGW, SFE7.5, SFE9
(1/4” x 7/8”)
AGX
(1/4” x 1”)
SFE14
(1/4” x 1-1/16”)
AGC, SFE20, UK
(1/4” x 1-1/4”)
AGY, SFE30
(1/4” x 1-7/16”)
AGU
(13/32” x 1-1/2”)
BOXED
CARDED
MATERIAL# CATALOG#
MATERIAL#
CATALOG#
CURRENT
RATING
(A)
CURRENT
RATING
(A)
250V may be substituted
BOXED
0AGA001.V
0AGA002.V
0AGA003.V
0AGA005.V
0AGA006.V
0AGA07.5V
0AGA010.V
0AGA015.V
0AGA020.V
0AGA025.V
0AGA030.V
AGA1
0AGA001.VP
AGA2
0AGA002.VP
AGA3
0AGA003.VP
AGA5
0AGA005.VP
AGA6
--AGA7.5
--AGA10
0AGA010.VP
AGA15
0AGA015.VP
AGA20
0AGA020.VP
AGA25
--AGA30
0AGA030.VP
AGC
AGA1BP
AGA2BP
AGA3BP
AGA5BP
----AGA10BP
AGA15BP
AGA20BP
--AGA30BP
.5A
1A
1.5A
2A
2.5A
3A
4A
5A
6A
7A
7.5A
8A
10A
15A
20A
25A
30A
35A
0AGC.500V
0AGC001.V
0AGC01.5V
0AGC002.V
0AGC02.5V
0AGC003.V
0AGC004.V
0AGC005.V
0AGC006.V
0AGC007.V
0AGC07.5V
0AGC008.V
0AGC010.V
0AGC015.V
0AGC020.V
0AGC025.V
0AGC030.V
0AGC035.V
AGC.500
AGC1
AGC1.5
AGC2
AGC2.5
AGC3
AGC4
AGC5
AGC6
AGC7
AGC7.5
AGC8
AGC10
AGC15
AGC20
AGC25
AGC30
AGC35
--AGC1BP
AGC1.5BP
AGC2BP
AGC2.5BP
AGC3BP
AGC4BP
AGC5BP
AGC6BP
--AGC7.5BP
--AGC10BP
AGC15BP
AGC20BP
AGC25BP
AGC30BP
AGC35BP
1A
2A
3A
4A
5A
10A
15A
0AGU001.T
0AGU002.T
0AGU003.T
0AGU004.T
0AGU005.T
0AGU010.T
0AGU015.T
AGU1
AGU2
AGU3
AGU4
AGU5
AGU10
AGU15
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MATERIAL#
CATALOG#
AGU
AGA
1A
2A
3A
5A
6A
7.5A
10A
15A
20A
25A
30A
--0AGC001.VP
0AGC01.5VP
0AGC002.VP
0AGC02.5VP
0AGC003.VP
0AGC004.VP
0AGC005.VP
0AGC006.VP
--0AGC07.5VP
--0AGC010.VP
0AGC015.VP
0AGC020.VP
0AGC025.VP
0AGC030.VP
0AGC035.VP
20A
25A
30A
35A
40A
50A
60A
0AGU020.T
0AGU025.T
0AGU030.T
0AGU035.T
0AGU040.T
0AGU050.T
0AGU060.T
AGU20
AGU25
AGU30
AGU35
AGU40
AGU50
AGU60
1A
1.5A
2.5A
3A
4A
5A
6A
15A
20A
30A
0AGW001.V
0AGW01.5V
0AGW02.5V
0AGW003.V
0AGW004.V
0AGW005.V
0AGW006.V
0AGW015.V
0AGW020.V
0AGW030.V
AGW1
AGW1.5
AGW2.5
AGW3
AGW4
AGW5
AGW6
AGW15
AGW20
AGW30
--------0AGU040.VPG
0AGU050.VPG
0AGU060.VPG
--------AGU40BPG
AGU50BPG
AGU60BPG
2A
3A
0AGX002.V
0AGX003.V
AGX2
AGX3
-----
-----
20A
0AGX020.V
AGX20
0AGX020.VP
AGX20BP
25A
0AGX025.V
AGX25
0AGX025.VP
AGX25BP
30A
0AGX030.V
AGX30
0AGX030.VP
AGX30BP
AGW
----------0AGW005.VP
--0AGW015.VP
0AGW020.VP
0AGW030.VP
----------AGW5BP
--AGW15BP
AGW20BP
AGW30BP
AGX
GBC
5A
8A
16A
25A
0GBC005.V
0GBC008.V
0GBC016.V
0GBC025.V
GBC5
GBC8
GBC16
GBC25
4A
6A
7.5A
9A
14A
20A
30A
0SFE004.V
0SFE006.V
0SFE07.5V
0SFE009.V
0SFE014.V
0SFE020.V
0SFE030.V
SFE4
SFE6
SFE7.5
SFE9
SFE14
SFE20
SFE30
--0GBC008.VP
0GBC016.VP
0GBC025.VP
--GBC8BP
GBC16BP
GBC25BP
0SFE004.VP
0SFE006.VP
0SFE07.5VP
0SFE009.VP
0SFE014.VP
0SFE020.VP
0SFE030.VP
SFE4BP
SFE6BP
SFE7.5BP
SFE9BP
SFE14BP
SFE20BP
SFE30BP
SFE
AGU
GBC
(6 x 25mm)
CARDED
MATERIAL# CATALOG#
---------------
---------------
19
www.littelfuse.com
9
10
Glass and Ceramic Fuses
A complete line of 3 AG 1" x 1-1/4" fuses designed for battery chargers,
diagnostic equipment, appliances and sophisticated electronic equipment. Available bulk, boxed, and
carded. Consult your Littelfuse representative or factory for information on glass and ceramic fuses.
3AG SLO-BLO® Indicating Fuse
3AG Slo-Blo® Fuse
Littelfuse patented design Indicating fuse
instantly shows whether fuse is blown through
discoloration of the glass body. Reduces
downtime by eliminating time consuming circuit
testing and guesswork. This unique design
offers the same characteristics as the standard
3AG Slo-Blo 313 fuse.
3AG (313) series Slo-Blo fuses have a time
delay in the overload range, which provides
superior protection for inductive loads such
as motors, transformers and solenoids.
Voltage Rating: 250V (1/2 – 8A), 32V (10A).
Approvals: UL listed: 1/2 – 8A, Recognized under the
Components
Program of UL: 10A, CSA Certified: 1/2 – 8A.
BOXED
®
3AB Fast-Acting &
Slo-Blo® Ceramic Fuse
Voltage Rating: 250V (1/4 – 8A), 32V (10A – 30A).
Ceramic body construction permits
higher interrupting and voltage ratings.
Ideal for applications where high
current loads are expected.
Approvals: UL listed: 1/2 – 8A, Recognized under
the Components Program of UL: 10A – 30A, CSA
Certified: 1/2 – 8A.
Voltage Rating: 250V (1/8 – 20A),
125V (25 – 30A).
BOXED
VOLTAGE
RATING
DESCRIPTION
313.250V
250V
1/4A 3AG Slo-Blo
313.500V
250V
1/2A 3AG Slo-Blo
313.750V
250V
3/4A 3AG Slo-Blo
VOLTAGE
RATING
DESCRIPTION
313.500VID
250V
1/2A Indicating 3AG Slo-Blo
313001V
250V
1A 3AG Slo-Blo
313001VID
250V
1A Indicating 3AG Slo-Blo
31201.5V
250V
1-1/2A 3AG Slo-Blo
3131.50VID
250V
1-1/2A Indicating 3AG Slo-Blo
313002V
250V
2A 3AG Slo-Blo
313002VID
250V
2A Indicating 3AG Slo-Blo
31302.5V
250V
2-1/2A 3AG Slo-Blo
313003VID
250V
3A Indicating 3AG Slo-Blo
313003V
250V
3A 3AG Slo-Blo
313004VID
250V
4A Indicating 3AG Slo-Blo
313004V
250V
4A 3AG Slo-Blo
313005VID
250V
5A Indicating 3AG Slo-Blo
313005V
250V
5A 3AG Slo-Blo
3136.25VID
250V
6-1/4A Indicating 3AG Slo-Blo
3136.25V
250V
6-1/4A 3AG Slo-Blo
313007VID
250V
7A Indicating 3AG Slo-Blo
313008V
250V
8A 3AG Slo-Blo
313008VID
250V
8A Indicating 3AG Slo-Blo
313010V
32V
10A 3AG Slo-Blo
313010VID
32V
10A Indicating 3AG Slo-Blo
313015V
32V
15A 3AG Slo-Blo
Approvals: UL listed and CSA
Certified: 1/8 – 15A, Recognized under the
Components Program of UL: 20 – 30A.
BOXED
VOLTAGE
RATING
DESCRIPTION
314010V
250V
10A 3AB Fast-Acting
314015V
250V
15A 3AB Fast-Acting
314020V
250V
20A 3AB Fast-Acting
326015V
250V
15A 3AB Slo-Blo
3AG Fast-Acting Fuse
Fast-acting protection of electronic
equipment and appliances. The circuit
protection standard for cost effective
reliability and performance.
Voltage Rating: 250V (1/4 – 10A),
32V (10A – 35A).
3AG Normal-Blo Fuse
3AG (311) series Normal-Blo fuses are for use
in radios, amplifiers, etc. Features straight type
fuse element positioned to center of fuse for easy
identification of blown fuse.
Voltage Rating: 32V.
Approvals: UL listed and CSA Certified.
8AG Normal-Blo Fuse
8AG (362) series Normal-Blo fuses are smaller
in size (1/4" x 1") and are designed to be used
where space limitations prevent the use of
3AG fuses.
Voltage Rating: 32V.
BOXED
VOLTAGE
RATING
DESCRIPTION
311005V
32V
5A 3AG Normal-Blo
311010V
32V
10A 3AG Normal-Blo
311015V
32V
15A 3AG Normal-Blo
311025V
32V
20A 3AG Normal-Blo
Approvals: UL listed: 1/8 – 5A, CSA
Certified: 1/4 – 5A.
www.littelfuse.com
DESCRIPTION
312.250V
250V
1/4A 3AG Fast-Acting
312.500V
250V
1/2A 3AG Fast-Acting
312.750V
250V
3/4A 3AG Fast-Acting
312001V
250V
1A 3AG Fast-Acting
3121.25V
250V
1-1/4A 3AG Fast-Acting
31201.5V
250V
1-1/2A 3AG Fast-Acting
312002V
250V
2A 3AG Fast-Acting
250V
2-1/2A 3AG Fast-Acting
2A 8AG Normal-Blo
312003V
250V
3A 3AG Fast-Acting
5A 8AG Normal-Blo
312004V
250V
4A 3AG Fast-Acting
312005V
250V
5A 3AG Fast-Acting
312006V
250V
6A 3AG Fast-Acting
312007V
250V
7A 3AG Fast-Acting
312008V
250V
8A 3AG Fast-Acting
312010V
250V
10A 3AG Fast-Acting
VOLTAGE
RATING
DESCRIPTION
362002V
32V
32V
VOLTAGE
RATING
31202.5V
BOXED
362005V
BOXED
20
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Circuit Breakers
Type I – Automatic Reset
Type II – Modified Reset
Type III – Manual Reset
Cycles or continuously resets until
the fault is corrected. Type I circuit
breakers are typically used to
protect circuits which occasionally
experience momentary overloads
such as wiper motor and headlamp
circuits where a self resetting
device is preferred.
Non-cycling, remains in open
position while there is power to
the circuit. Resets when ignition is
turned off. Type II circuit breakers
are typically used in applications
where fuse replacement is
objectionable, such as power
window, seat and sunroof circuits.
Manually resettable circuit breakers
remain in the open position until a
button, lever or other external reset
device is manually depressed. Type
III circuit breakers are typically used
in applications where a manual
reset is desired for safe diagnosis of
a circuit fault.
INI® Circuit Breakers Standard Mini
M
Footprint Circuit Breakers
MATERIAL #
CATALOG #
5A
10A
15A
20A
25A
30A
0MIB005.X
0MIB010.X
0MIB015.X
0MIB020.X
0MIB025.X
0MIB030.X
MIB5
MIB10
MIB15
MIB20
MIB25
MIB30
Designed to fit in a MINI® Blade fuse block or panel.
SAE Type II used primarily as a wiring harness protector
in 12 volt DC automotive systems. Conforms to
SAE J553C standard.
Wide Mini Footprint Circuit Breakers
CURRENT
RATING
(A)
APPLICATION
15A
20A
NON-CYCLING
CYCLING
Direct factory replacement for many domestic OEM
applications. Designed to fit either in an ATO® or MINI®
Blade fuse block or panel. Their blade configuration is
of the MINI design and fit in a standard ATO fuse slot
or across two MINI slots. Available in either SAE Type
I cycling or SAE Type II non-cycling used primarily as
a wiring harness protector in 12 volt DC automotive
systems. Conforms to SAE J553C standard.
BOXED
CURRENT
RATING (A)
BOXED
MATERIAL #
CATALOG #
Heavy Truck Headlamp
0MMB015.X
MMB15
Automotive Headlamp
0MMB020.X
MMB20
10A
Heavy Duty Truck
0MNB010.X
MNB10
15A
Heavy Duty Truck
0MNB015.X
MNB15
20A
Automotive/Heavy Truck
0MNB020.X
MNB20
25A
Automotive/Heavy Truck
0MNB025.X
MNB25
30A
Automotive/Heavy Truck
0MNB030.X
MNB30
Specialty OEM Circuit Breakers
Direct factory replacement for many domestic OEM vehicles. SAE Type I and Type II modified reset used primarily as
a wiring harness protector in 12 volt DC automotive systems. Conforms to SAE J553C standard. Designed to mount in
ATO style fuse blocks and panels.
CURRENT
RATING
(A)
APPLICATION
OEM #
20A
Automotive Headlamp
GM# 12040816
---
---
0ACB020.XP
30A
Power Windows, & Locks
GM# 01252240
---
---
0ACB030.XP
ACB30
20A
Power Windows
0FCB020.X
FCB20
0FCB020.XP
FCB20BP
25A
Windows, Seats & Locks
Ford# 83507005
Ford# D9AB-14526-BA
Chrysler# 4527053
0CCB025.X
CCB25
0CCB025.XP
CCB25BP
BOXED
MATERIAL #
CARDED
CATALOG # MATERIAL #
CATALOG #
ACB20
Universal Circuit Breakers
Universal Circuit Breakers function identically and have same internal components as OEM breakers but offer the
versatility of snap off terminals for greater flexibility. SAE Type II modified reset used primarily as a wiring harness
protector in 12 volt DC automotive systems. Meets OEM requirements. Conforms to SAE J553C standard. Designed to
mount in ATO style fuse blocks and panels.
CURRENT
RATING
(A)
MATERIAL #
CATALOG #
5A
0UCB005.X
UCB5
6A
---
---
BOXED
BOXED 100
BOXED BULK
CARDED
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
BUCB005.H
BUCB5H
BUCB005.Z
BUCB5
0UCB005.XP
UCB5BP
UCB6BP
---
---
---
---
0UCB006.XP
8A
---
--BUCB010.H
--BUCB10H
--BUCB010.Z
--BUCB10
UCB8BP
0UCB010.X
--UCB10
0UCB008.XP
10A
0UCB010.XP
UCB10BP
15A
0UCB015.X
UCB15
BUCB015.H
BUCB15H
BUCB015.Z
BUCB15
0UCB015.XP
UCB15BP
20A
0UCB020.X
UCB20
BUCB020.H
BUCB20H
BUCB020.Z
BUCB20
0UCB020.XP
UCB20BP
25A
0UCB025.X
UCB25
BUCB025.H
BUCB25H
BUCB025.Z
BUCB25
0UCB025.XP
UCB25BP
30A
0UCB030.X
UCB30
BUCB030.H
BUCB30H
BUCB030.Z
BUCB30
0UCB030.XP
UCB30BP
©2016 Littelfuse Automotive Aftermarket Circuit Protection
21
www.littelfuse.com
10
11
Circuit Breakers
MAXI Circuit Breakers
Direct factory replacement for many domestic OEM applications. Designed to fit a MAXI Blade fuse block
or panel. Available in either SAE Type I cycling or SAE Type II non-cycling. Used primarily as a wiring harness
protector in 12 volt DC automotive systems. Meet OEM requirements. Conforms to SAE J553C standard.
NONCYCLING
CYCLING
CURRENT
RATING
(A)
BOXED
APPLICATION
OEM #
20A
Automotive Headlamp
GM# 12065132
0MCB020.X
MCB20
30A
Automotive Headlamp, Seats & Wipers
GM# 12088553
0MCB030.X
MCB30
MATERIAL #
CATALOG #
40A
---
---
0MCB040.X
MCB40
10A
Automotive Power Devices
Heavy Truck & Auto Cooling Fan
GM# 12077842
Ford# FGHT-14526-KA
0MXB020.X
MXB20
15A
Automotive Power Window
Heavy Truck & Auto Cooling Fan & Power Window
GM# 12077843
Ford# F6HT-14526-LA
0MXB020.X
MXB30
Fuse Clip Circuit Breakers
Direct replacement for many OEM applications. Designed for glass fuses without physical alteration in
the system. Fits 1-1/4" fuse clips. SAE Type II non-cycling used primarily as a wiring harness protector in
12 volt DC automotive systems. Conforms to SAE J553C standard.
BOXED
CARDED
CURRENT
RATING (A)
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
10A
0CBF010.Z
CBF10
0CBF010.XP
CBF10BP
15A
0CBF015.Z
CBF15
0CBF015.XP
CBF15BP
20A
0CBF020.Z
CBF20
0CBF020.XP
CBF20BP
25A
0CBF025.Z
CBF25
0CBF025.XP
CBF25BP
30A
0CBF030.Z
CBF30
0CBF030.XP
CBF30BP
35A
0CBF035.Z
CBF35
0CBF035.XP
CBF35BP
40A
0CBF040.Z
CBF40
0CBF040.XP
CBF40BP
Stud Type Low Voltage (6–12 Volts) Circuit Breakers
SAE Type I automatic reset provides protection in installations where it is not possible to manually reset a breaker
because of location or safety requirements. Used primarily as a wiring harness protector in 12 volt DC automotive
systems. Conforms to SAE J553C standard. Available with mounting bracket-change part number from 812 to 813,
e.g. 813005 ST.
www.littelfuse.com
BOXED W/O BRACKET
BOXED W/ BRACKET
CARDED
CURRENT
RATING (A)
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
5A
0812005.ZXST
812005ST
0813005.ZXST
813005ST
---
---
6A
0812006.ZXST
812006ST
0813006.ZXST
813006ST
---
---
8A
0812008.ZXST
812008ST
0813008.ZXST
813008ST
---
---
10A
0812010.ZXST
812010ST
0813010.ZXST
813010ST
---
---
15A
0812015.ZXST
812015ST
0813015.ZXST
813015ST
---
---
20A
0812020.ZXST
812020ST
0813020.ZXST
813020ST
0813020.XP
813020BP
25A
0812025.ZXST
812025ST
0813025.ZXST
813025ST
---
---
30A
0812030.ZXST
812030ST
0813030.ZXST
813030ST
0813030.XP
813030BP
35A
0812035.ZXST
812035ST
0813035.ZXST
813035ST
---
---
40A
0812040.ZXST
812040ST
0813040.ZXST
813040ST
0813040.XP
813040BP
50A
0812050.ZXST
812050ST
0813050.ZXST
813050ST
0813050.XP
813050BP
22
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Circuit Breakers
Hi-Amp Type III Circuit Breakers
These high amp circuit breakers are typically used in auxiliary and accessory circuits for trucks, buses, RVs and
marine applications. All high amp circuit breakers comply with the SAE J1117 standard for ignition protection and
have applications in battery charger systems and DC audio systems.
BOXED
CARDED
CURRENT
RATING (A)
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
50A
0185050.X
185050
---
---
60A
0185060.X
185060
---
---
70A
0185070.X
185070
---
---
80A
0185080.X
185080
---
---
100A
0185100.X
185100
0185100.XP
185100BP
120A
0185120.X
185120
0185120.XP
185120BP
---
---
0185150.XP
185150BP
150A
Mini Type I Circuit Breakers
Designed to fit in a MINI blade fuse block or panel. Conforms to SAE J553. Cycles or continuously resets until
the fault is corrected. Type I circuit breakers are typically used to protect circuits which occasionally experience
momentary overloads such as wiper motor and headlamp circuits where a self resetting device is preferred.
BOXED
CARDED
CURRENT
RATING (A)
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
10A
---
---
0211010.XP
211010BP
15A
0211015.X
211015
0211015.XP
211015BP
20A
0211020.X
211020
0211020.XP
211020BP
25A
0211025.X
211025
0211025.XP
211025BP
30A
0211030.X
211030
0211030.XP
211030BP
©2016 Littelfuse Automotive Aftermarket Circuit Protection
23
11
www.littelfuse.com
MEGA® Bolt-Down Fuse
The MEGA® Fuse is designed for high current circuit protection up to 500A with “Diffusion Pill Technology.”
The MEGA® Fuse also provides time delay characteristics. Littelfuse patented device designed for high current
protection up to 250 amperes found OEM on Ford, GM a nd Chrysler vehicles. Slo-Blo® feature eliminates
nuisance blowing d
uring temporary, short duration overloads. Commonly used for battery and alternator
connections and other heavy gauge cables requiring ultra high current protection.
DIMENSIONS
TIME-CURRENT
CHARACTERISTIC CURVES
TIME-CURRENT CHARACTERISTICS
Opening Time Min / Max (s)
% of
Rating
75
40-250
300-500
–/–
14,400 s / –
100
14,400 s / –
–/–
135
120 s / 1800 s
–/–
200
1 s / 15 s
1 s / 15 s
350
0.300 s / 5 s
0.500 s / 5 s
600
0.100 s / 1 s
–/–
TEMPERATURE RERATING CURVE
12
MEGA® FUSE TABLE
CURRENT
RATING (A)
BOXED 1PC
MATERIAL #
BOXED 50PC
CATALOG #
MATERIAL #
CARDED
CATALOG #
MATERIAL #
CATALOG #
80A
0MEG080.X
---
---
---
0MEG080.XPA
MEG80BP
100A
0MEG100.X
MEG100
0MEG100.L
MEG100L
0MEG100.XPA
MEG100BP
125A
0MEG125.X
MEG125
0MEG125.L
MEG125L
0MEG125.XPA
MEG125BP
150A
0MEG150.X
MEG150
0MEG150.L
MEG150L
0MEG150.XPA
MEG150BP
175A
0MEG175.X
MEG175
0MEG175.L
MEG175L
0MEG175.XPA
MEG175BP
200A
0MEG200.X
MEG200
0MEG200.L
MEG200L
0MEG200.XPA
MEG200BP
225A
0MEG225.X
MEG225
0MEG225.L
MEG225L
0MEG225.XPA
MEG225BP
250A
0MEG250.X
MEG250
0MEG250.L
MEG250L
0MEG250.XPA
MEG250BP
300A
0MEG300.X
MEG300
0MEG300.L
MEG300L
---
---
350A
0MEG350.X
MEG350
0MEG350.L
MEG350L
---
---
400A
0MEG400.X
MEG400
0MEG400.L
MEG400L
---
---
450A
0MEG450.X
MEG450
0MEG450.L
MEG450L
---
---
500A
0MEG500.X
MEG500
0MEG500.L
MEG500L
---
---
www.littelfuse.com
24
©2016 Littelfuse Automotive Aftermarket Circuit Protection
MIDI® Bolt-Down Fuse
This MIDI® style fuse offers a bolt-down space saving fuse for high current wiring protection and provides time
delay characteristics with “Diffusion Pill Technology”. The MIDI® was designed and patented by Littelfuse.
Littelfuse patented device found OEM on Chrysler and BMW. Slo-Blo® feature elimInates nuisance blowing
during temporary, short duration overloads.
Voltage Rating Characteristics: 32V AC/DC Slo-Blo®
MIDI® FUSE TABLE
TEMPERATURE RERATING CURVE
CARDED
MATERIAL
#
CATALOG
#
MATERIAL
#
50A
0MID050.X
MID50
0MID050.XP
0MID080.X
MID80
0MID080.XP
--
--
0MID150.XP
80A
150A
MIDI Rerating Curve
115
110
Rerating Factor (% Rated Current)
BOXED
CURRENT
RATING (A)
DIMENSIONS
105
100
95
90
85
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
Ambient Temperature (C)
ZCASE Single MEGA Fuse
The Single Zcase is a Minimal Footprint Bolt Down Fuse with a wide rating range up to 250A in the same
packaging size. The Time Current characteristic is similar to the well known Mega Design and can used as
full wire protection until 250A. Higher ratings mostly used for typically Starter Fuse application as a protector
fuse. The fuse design is optimized for a one bolt connection M6 (125 A - 250 A) or M8 (300 A - 600 A)
and can used directly on a battery post or busbar connection. Littelfuse is offering a complete solution for
the necessary stud and different busbar connections including some battery clamps. See your Littelfuse
respresentative for higher amperage (300A-600A) solutions.
ZCASE FUSE TABLE
TIME-CURRENT CHARACTERISTICS
CURRENT
RATING (A)
DIMENSIONS
BULK
CARDED
MATERIAL
#
MATERIAL
#
125A
3298125.Z
ZCAS125.XP
150A
3298150.Z
ZCAS150.XP
175A
3298175.Z
ZCAS175.XP
200A
3298200.Z
ZCAS200.XP
135
120 / 1800
–/–
225A
3298225.Z
ZCAS225.XP
200
1 / 15
1 / 40
0.300 / 5
0.300 / 5
3298250.Z
ZCAS250.XP
350
250A
500
–/–
0.100 / 1 (only for 500A)
600
0.100 / 1
0.100 / 1 (except 600A)
©2016 Littelfuse Automotive Aftermarket Circuit Protection
% of
Rating
25
Opening Time Min / Max (s)
125A - 250A
300A - 600A
50
–/–
14,400 / –
100
14,400 / –
–/–
www.littelfuse.com
13
14
Fuse Block
ATO® Fuse Block with 1/4” Quick
Connect Terminals
CARDED
TERMINAL STYLE
Use with ATO® fuses up to 15 amps. Available
in 5 pole unit with removable clear protective
cover. Available in side or bottom positioned
1/4" Q.C. terminal configurations. Unit with
bottom Q.C. terminals includes detachable side
mounting brackets.
AXI Fuse Single Pole
M
High Amp Block
MATERIAL #
CATALOG #
1/4” Q.C. side position
03500417XP
350417BP
1/4” Q.C. bottom position
(includes mounting brackets)
03500418XP
350418BP
BOXED
Use with MAXI fuses up to 60 amps. Safe/
easy replacement for hard to replace fusible link
wire. Perfect for high amp audio applications.
Interlocking block feature permits two pole
position installation. Contains screw terminals.
Optional dust cover available.
CARDED
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
0MAB0001F
MAB1
0MAB0001XP
MAB1BP
MEGA® Fuse Block
Use with MEGA® fuses up to 250 amps. Ideal for
battery and alternator connections and other heavy
gauge cables requiring ultra high current protection.
Includes protective cover. Features interconnecting
pins on side of fuse block for secure multiple block
configurations. Includes M8 threaded studs and
hex nuts with lock washers. Fuse not included.
BOXED
20-PC PACK
10-PC PACK
MATERIAL #
70-PC PACK
CATALOG #
MATERIAL #
MATERIAL #
02980900Z
298900
02980900S
02980900TXN
MIDI® Fuse Block
BOXED
Use with MIDI® fuses up to 100 amps. Includes
protective cover. Features interconnecting pins
on side of fuse block for secure multiple block
configurations. Includes M5 threaded studs and
hex nuts with lock washers. Fuse not included.
20-PC PACK
330-PC PACK
MATERIAL #
CATALOG #
04980900S
04980900ZXT
Omni-Blok® Fuseholder
For 1/4" x 1-1/4" glass fuses. Available in one through twelve pole units. Units may be easily broken apart
as needed to obtain the desired number of poles. Rated at 20 amps, 300 volts. “354” series is bulk,
“OMN” series is carded.
CARDED
PART NO.
DESC.
PART NO.
DESC.
PART NO.
DESC.
354801-GY
1 Pole
354805-GY
5 Pole
354809-GY
9 Pole
MATERIAL #
CATALOG #
354802-GY
2 Pole
354806-GY
6 Pole
354810-GY
10 Pole
2 Pole
0OMN0002XP
OMN2
354803-GY
3 Pole
354807-GY
7 Pole
354811-GY
11 Pole
4 Pole
0OMN0004XP
OMN4
354804-GY
4 Pole
354808-GY
8 Pole
354812-GY
12 Pole
Laminated Base Fuse Block with Screw Terminals
For 1/4" x 1-1/4" glass fuses. Available in one through twelve pole units. Rated at 20 amps, 300 volts.
www.littelfuse.com
PART NO.
DESC.
PART NO.
DESC.
PART NO.
DESC.
356001
1 Pole
356005
5 Pole
356009
9 Pole
356002
2 Pole
356006
6 Pole
356010
10 Pole
356003
3 Pole
356007
7 Pole
356011
11 Pole
356004
4 Pole
356008
8 Pole
356012
12 Pole
26
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Power Feed
ATO® Add-A-Circuit™ Kit
Allows easy installation of additional circuits without cutting or splicing. Turns one fuse slot into two while
providing protection for both circuits. Maintains new car warranty. Use with ATO® Fuses up to 10 amps.
Includes ATO 3, 5, 7.5 and 10 amp fuses.
BOXED
CARDED
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
0FHA0200Z
FHA200
0FHA0200ZP
FHA200BP
Caution: Fusetaps are not a recommended alternative for adding circuits because they can
overstress the terminals in the fuse block. This situation can create a loose fitting fuse, which in
turn produces excessive heat, which can cause n
uisance blows, even melting of the fuse and fuse
block and possibly an expensive repair in the future. When a fusetap is used, in many cases there
is no fuse protecting the new circuit, a condition which can also present a hazard.
MINI® Add-A-Circuit™ Kit
Same as ATO Add-A-Circuit except for use with
MINI® Fuses up to 10 amps.
Includes MINI 3, 5, 7.5 and 10 amp fuses.
®
LPMINI® Add-A-Circuit™ Kit
Same as ATO® Add-A-Circuit except for use with
LPMINI® Fuses up to 10 amps.
Includes LPMINI 3, 5, 7.5 and 10 amp fuses.
MICRO2® Add-A-Circuit™ Kit
Same as ATO® Add-A-Circuit except for use with
MICRO2® Fuses up to 10 amps.
Includes MICRO2 3, 5, 7.5 and 10 amp fuses.
Battery Power Feed Kit
CARDED
CATALOG #
MATERIAL #
CATALOG #
0FHM0200Z
FHM200
0FHM0200ZP
FHM200BP
BOXED
CARDED
MATERIAL #
MATERIAL #
FHLM0200Z
FHLM0200ZPA
BOXED
CARDED
MATERIAL #
MATERIAL #
FHM20200Z
FHM20200ZPA
CARDED
Attaches directly to battery terminal. Allows the
addition of up to 3 circuits. Includes MINI® Fuse
In-line Fuseholder with protective cap. Also
can be used as a frame ground. Constructed of
durable brass for optimal conductivity.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
BOXED
MATERIAL #
27
MATERIAL #
CATALOG #
0BPF0001ZP
BPF1BP
www.littelfuse.com
15
16
Fuseholders
INI® Fuse In-line Fuseholder
M
with Protective Cap
CARDED
Use with MINI Fuse 2 to 20 amps. Supplied with
two 4" wire leads of 14 gauge black wire. Includes
protective cover for harsh environment. FHM1BP
®
MATERIAL #
CATALOG #
0FHM0001XP
FHM1BP
0FHM0002XP
FHM2BP
SMART GLOW CARDED
MINI® Fuse Heavy Duty In-Line Fuseholder with
Protective Cap
MATERIAL #
CATALOG #
0FHM0001XPGLO
20-1020
Use with MINI Fuse 25 and 30 amp fuses. Supplied with two 4"
wire leads of 12 gauge orange wire. Includes protective cover for
harsh environment. FHM2BP
®
ATO® Fuse In-line Fuseholder
with Protective Cap
CARDED
Use with ATO® Fuse 1 to 20 amps. Supplied with two 4" wire leads of
16 gauge black wire. Includes protective cover for harsh environment.
FHAC1BP
MATERIAL #
CATALOG #
FHAC0001XP
FHAC1BP
FHAC0002XP
FHAC2BP
ATO® Fuse Heavy Duty In-Line Fuseholder with
Protective Cap
Use with ATO® 25 and 30 amp fuses for air conditioner or other
heavy duty applications. Supplied with two 4" wire leads of 12
gauge orange wire. Includes protective cover for harsh environment.
FHAC2BP
ATO® Fuse In-line Fuseholder
BOXED
Use with ATO® Fuse 1 to 20 amps. Supplied with two
4" wire leads of 16 gauge black wire. FHA1BP
ATO® Fuse Heavy Duty In-Line Fuseholder
Use with ATO® 25 and 30 amp fuses for air conditioner or
other heavy duty applications. Supplied with two 4" wire
leads of 12 gauge orange wire.
FHA2BP, FHA30BP includes 30 amp fuse.
CARDED
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
---
---
0FHA0001XP
FHA1BP
---
---
0FHA0002XP
FHA2BP
0FHA0030Z
FHA30
0FHA0030XP FHA30BP
SMART GLOW CARDED
MATERIAL #
CATALOG #
0FHA0001XPGLO
20-1010
ATO® Fuse In-line Panel Mount Fuseholder
Versatile fuseholder for in-line or snap mount panel applications.
Interlock body design allows fuseholders to be snapped
together. Use with ATO® Fuse 1 to 20 amps. Supplied with 8"
loop of 14 gauge black wire. AFH1BP
CARDED
MATERIAL #
CATALOG #
0AFH0001XP
AFH1BP
0AFH0002XP
AFH2BP
ATO® Fuse Heavy Duty In-line Panel Mount Fuseholder
Use with ATO® Fuse 25 and 30 amp fuses. Same as AFH 1 except supplied
with 8" loop of 10 gauge orange wire. AFH2BP
www.littelfuse.com
28
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Fuseholders
MAXI Fuse In-line Fuseholder with Protective Cap
Use with MAXI Fuse up to 60 amps. Supplied with two 6" wire leads of
6 gauge black wire. Includes protective cover for harsh environment and
mounting hole for easy firewall installation.
BOXED
MATERIAL #
CATALOG #
MAHC0001ZXJ
MAH1
Universal Glass Bayonet Knob In-line Fuseholder
Constructed of tough black thermoset (UL94V0). Includes 3 springs for
various fuse sizes and spring-locked, bayonet type knob. Supplied with 15"
loop of 14 gauge red wire. Use with Glass SFE 71/2, 9, 14, 20, AGA, AGC,
AGW and AGX Fuses up to 20 amps when proper spring is installed.
BOXED
MATERIAL #
CATALOG #
0FHP0001Z
FHP1
Universal Glass Twist-Lock In-line Fuseholder
Constructed of weather resistant nylon. Simple “twist-lock” allows
easy fuse removal and replacement. Supplied with 8" loop of 14 gauge
black wire and one spring. Use with Glass SFE 4, 6, 71/2, 9, 14, 20,
AGA, AGC, AGW and AGX Fuses up to 20 amps.
CARDED
MATERIAL #
CATALOG #
0FNY0001XP
FNY1BP
Glass Fuse Heavy Duty 30 Amp In-line Fuseholder
Spring loaded heavy duty glass fuseholder includes AGC 30 amp fuse for GM
air conditioner, heater blower motors or other heavy duty applications. Supplied
with two 4" wire leads of 12 gauge orange wire.
FNY20BP includes 20A AGC Fuse.
CARDED
MATERIAL #
CATALOG #
0FNY0020XP
FNY20BP
0FNY0030XP
FNY30BP
3AG Shock-Safe Panel Fuseholders
17
Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65
and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and antitease feature that eliminates circuit interruption when knob is accidentally depressed.
Voltage Rating: 250V.
Approvals: UL listed and CSA Certified. Recognized under the Components Program of UL.
CARDED
VOLTAGE
RATING
DESCRIPTION
03453LF2XP
20A
with 1/4" straight NEMA/DIN Quick Connect Terminal
03453LF8XP
20A
with 3/16" straight dual purpose solder terminal
©2016 Littelfuse Automotive Aftermarket Circuit Protection
29
www.littelfuse.com
Switches • Pullers / Testers
Anti-Theft Battery Master Switch
• Available in two versions, Fused and Detachable.
• Fused version maintains current to all electrical
circuits such as the alarm, on-board computer,
central locking system and radio memory presets.
• A simple turn of the knob isolates the battery and
renders the vehicle unstartable.
• Makes anti-theft protection affordable when
compared to expensive alarm systems.
• Detachable version features a special disconnect
that allows the battery to easily be removed for
anti-theft protection. Perfect for seasonal storage
needs or easy off vehicle battery charging for Autos,
Motorcycles,
RV’s, Boats, etc.
• Eliminates complicated installation — no special
electrical or mechanical expertise required.
• Generate sales with the lowest cost anti-theft
devices available on the market today.
• Works on 12 to 24 volt systems up to 135 amperes.
CARDED
• Fits all standard Top Mount Post batteries. Can be
used with Side Mount Post batteries by using a Top
Mount Adapter Post (not included).
DESCRIPTION
MATERIAL #
CATALOG #
0ATD0200XBP
ATD200BP
Anti-theft Battery Master Swtich – Detachable
0ATD0300ZBP
ATD300BP
Anti-theft Battery Master Switch – Fused
Fuse Tester and Puller
00970054N
Conveniently and easily tests ATO® and MINI® blade fuses either in or out of the fuse block, with or without
vehicle battery power. Indicator light on tester glows bright green when fuse is good. Fuse puller end allows for
easy fuse removal and replacement. 24V maximum.
Fuse Pullers
Fuse puller allows for easy fuse removal and replacement.
00970025N
097023
097019
097026
BOXED
18
097038
www.littelfuse.com
CARDED
MATERIAL
#
CATALOG
#
MATERIAL
#
CATALOG
#
00970019X
097019
00970019XP
097019BP
00970023Z
097023
00970023XP
097023BP
00970026N
--00970038Z
--00970025N
00970054N
097026
--097038
-------
00970026XP
00970035XP
00970038XP
00970053XP
00970025XPA
00970054XPA
097026BP
-----------
30
DESCRIPTION
For ATO® & MINI® Fuses
™
Tri-Puller – for Glass Fuses, Ceramic Type
Fuses, ATO® and MINI® Blade Fuses
For MAXI Blade Fuses
For ATO® and MINI® Fuses
For JCASE® Fuses
For Micro2 / Micro3 Fuses
For MCase Fuses
©2016 Littelfuse Automotive Aftermarket Circuit Protection
CNL/CNN Fuses • Fusible Links
CNL / CNN Fuses
CNL fast-acting and CNN very fast-acting
fuses are recommended for use on battery
operated lift trucks and other low voltage
battery operated equipment. Part No.
example: CNN 700.
Voltage Rating: CNL: 32V DC
CNN: 48V DC, 75V AC
Interrupting Rating: 2,500 amperes
Ampere Range: 10-800 degrees
Maximum Torque: 90 lbs.
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
0CNL035.V
0CNL040.V
0CNL050.V
0CNL060.V
0CNL080.V
0CNL100.V
0CNL125.V
0CNL150.V
0CNL175.V
0CNL200.V
0CNL250.V
0CNL275.V
0CNL300.V
0CNL325.V
0CNL350.V
0CNL400.V
0CNL500.V
-------------
CNL035
CNL040
CNL050
CNL060
CNL080
CNL100
CNL125
CNL150
CNL175
CNL200
CNL250
CNL275
CNL300
CNL325
CNL350
CNL400
CNL500
-------------
0CNN010.V
0CNN035.V
0CNN040.V
0CNN050.V
0CNN060.V
0CNN080.V
0CNN090.V
0CNN100.V
0CNN125.V
0CNN150.V
0CNN175.V
0CNN200.V
0CNN225.V
0CNN250.V
0CNN275.V
0CNN300.V
0CNN325.V
0CNN350.V
0CNN400.V
0CNN500.V
0CNN600.V
0CNN700.V
0CNN800.V
CNN010
CNN035
CNN040
CNN050
CNN060
CNN080
CNN090
CNN100
CNN125
CNN150
CNN175
CNN200
CNN225
CNN250
CNN275
CNN300
CNN325
CNN350
CNN400
CNN500
CNN600
CNN700
CNN800
CARDED
Honda Fusible Links
Original equipment replacement fusible link
bar for Honda Civics. Available in 45, 55 and
65 amp fuse bars. Carded merchandise only
available in 3 piece assortment 094413.
Volkswagen Fusible Links
MATERIAL #
CATALOG #
DESCRIPTION
00940413ZP
094413
0FLC014.XP
FLC14BP
Fusible Link 14 AWG
0FLW014.XP
FLW14BP
Fusible Link 14 AWG with Terminals
0FLW016.XP
FLW16BP
00940402ZP
ASST Honda Fusible Link Assortment
Fusible Link 16 AWG with Terminals
ASST Volkswagen Fusible Link Assortment
Original equipment fusible link bar for
Volkswagen cars. 30, 40, 50, 60, 80, 110,
150, 175A fuse bars.
Fusible Links
Original equipment replacement fusible
link bar.
Available in 30, 50, 80 and 100 amp
fuse bars.
19
20
©2016 Littelfuse Automotive Aftermarket Circuit Protection
31
www.littelfuse.com
Retail
Commercial Assortments
Littelfuse Assortments cover all of the professional technician’s circuit protection needs.
Littelfuse offers the most comprehensive circuit protection kits on the market today
addressing the needs of the Professional Service Center and Road Service Operation
with genuine Littelfuse OEM fuses. Littelfuse Commercial Assortments are designed for
the professional installer who needs a larger quantity and variety of fuses at the point of
installation. Assortments are packaged in tough plastic storage containers perfect for the parts
drawer, tool box, under counter or road service vehicle.
MATERIAL #
00940409Z
CATALOG #
CONTENT
094409
(10) ATO 3 (10) ATO 5 (10) ATO 7.5 (10) ATO 10
(10) ATO 15 (10) ATO 20 (10) ATO 25 (10) ATO 30
MICRO2™ Fuse
70 Piece Commercial Assortment
CARDED
CARDED
ATO® Fuse
80 Piece Commercial Assortment
MATERIAL #
CATALOG #
00940560ZXA 00940560
CARDED
ATO® / MINI® Fuse
80 Piece Commercial Assortment
MATERIAL # CATALOG #
CONTENT
(10) ATO 15 (10) ATO 20 (10) ATO 25 (10) ATO 30
(10) MINI 15 (10) MINI 20 (10) MINI 25
(10) MINI 30 (1) Puller
094422
00940422Z
CONTENT
(10) MICRO2 5 (10) MICRO2 20
(10) MICRO2 7.5 (10) MICRO2 25 (10) MICRO2 10
(10) MICRO2 30 (10) LPMINI 15
MICRO2™,MICRO3™, MCASE® Fuse
135 Piece Commercial Assortment
MATERIAL #
CATALOG #
00940551Z
094551
CARDED
00940552Z
00940570ZXA 00940570
(10) MINI 3 (10) MINI 5 (10) MINI 7.5
(10) MINI 10 (10) MINI 15 (10) MINI 20
(10) MINI 25 (10) MINI 30
Low Profile MINI® Fuse
80 Piece Commercial Assortment
MATERIAL #
CATALOG #
CONTENT
094552
(10) LPMINI 3 (10) LPMINI 5 (10) LPMINI 7.5
(10) LPMINI 10 (10) LPMINI 15 (10) LPMINI 20
(10) LPMINI 25 (10) LPMINI 30
MCASE® Fuse
80 Piece Commercial Assortment
MATERIAL #
00940480Z
www.littelfuse.com
094480
CONTENT
(4) JCASE 20 (4) JCASE 30 (4) JCASE 40
(1) JCASE 50 (1) JCASE 60 (1) PULLER
CONTENT
(20) MCASE 20 (20) MCASE 25 (20) MCASE 30
(20) MCASE 40
Low Profile JCASE® Fuse
16 Piece Commercial Assortment
CARDED
CARDED
CATALOG #
CATALOG #
00940565ZXA 00940565
JCASE® Fuse
14 Piece Commercial Assortment
MATERIAL #
CONTENT
(10) MICRO2, MICRO3 5 (10) MICRO 30 (10)
MICRO2, MICRO3 7.5 (5) MCASE 15 (10) MICRO2,
MICRO3 10 (5) MCASE 20 (10) MICRO2, MICRO3
15 (5) MCASE 25 (10) MICRO 20 (5) MCASE 30 (10)
MICRO 25 (5) MCASE 40
CONTENT
CARDED
CARDED
MINI® Fuse
80 Piece Commercial Assortment
CARDED
MATERIAL # CATALOG #
MATERIAL # CATALOG #
00940553Z
32
094553
CONTENT
(4) LPJCASE 20 (4) LPJCASE 30 (4) LPJCASE 40 (1)
LPJCASE 50 (1) LPJCASE 60 (1) PULLER
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Retail
Fuse
®
It glows when it blows.
MATERIAL #
NEW PACKAGING
MATERIAL #
00940509ZXGLO
00940509ZXGLOA
Smart Glow MINI® Blade Fuse
80 Piece Commercial Assortment
CONTENT
(10) ATO 3 (10) ATO 5 (10) ATO 7.5
(10) ATO 10 (10) ATO 15 (10) ATO
20 (10) ATO 25 (10) ATO 30
CARDED
CARDED
Smart Glow ATO® Blade Fuse
80 Piece Commercial Assortment
MATERIAL #
NEW PACKAGING
MATERIAL #
CONTENT
(10) ATO 3 (10) ATO 5 (10) ATO 7.5
00940510ZXGLO 00940510ZXGLOA (10) ATO 10 (10) ATO 15 (10) ATO 20
(10) ATO 25 (10) ATO 30
Caddys
Professional Fuse Caddy
rovides a complete assortment designed to meet the professional installer’s on-the-road fuse needs.
P
Contains 180 of the most popular fuses and installation tools (includes ATO®/MINI® Tester/ Puller)
needed to service passenger cars and light trucks, heavy and m
edium trucks and buses.
Comes in compact handy storage box perfect for the on-the-road v
ehicle.
CARDED
MATERIAL #
00940396Z
CATALOG #
094396
CONTENT
(5) ATO 3 (5) ATO 5 (5) ATO7.5 (10) ATO 10 (15) ATO 15 (15) ATO 20
(10) ATO 25 (15) ATO 30 (5) MIN 2 (5) MIN 3 (5) MIN 4 (5) MIN 5 5)
MIN 7.5 (5) MIN 10 (5) MIN 15 (5) MIN 20 (5) MIN 25 (5) MIN 30
(5) AGC 5 (5) AGC 10 (5) AGC 15 (5) AGC 20 (5) AGC 25 (5) AGC 30
(5) SFE 14 (5) SFE20 (5) SFE 30 (1) MAX 20 (1) MAX 30 (1) MAX 40
(1) MAX 50 (1) MAX 60
(1) Fuse Tester and Puller (1) Tri-puller™ (1) MAXI Fuse Puller
21
©2016 Littelfuse Automotive Aftermarket Circuit Protection
33
www.littelfuse.com
ED
R
BO
X
Retail
Red Box
Designed by Littelfuse®, it features the exact OEM parts used for
the glass, ATO®, MINI®, MAXI, PAL, JCase®, low profile MINI®,
MCASE, MICRO2 and MICRO3 fuses installed on over 98% of
the cars, vans, light trucks and SUV’s on the road today. All come
packed inside one compact, portable, organized carrying case. With
Red BoxTM, your days of wasting valuable shelf space on redundant
part numbers is over. Over 500 fuses inside Red BoxTM meet over
98% of the market’s circuit protection needs, giving you more
coverage and more profit with a lot less inventory.
KIT Professional Installer Case KIT Professional Installer Case KIT Professional Installer Case
(no Glass with Module 6)
(no Glass with Module 5)
MATERIAL #
CATALOG #
MATERIAL #
CATALOG #
MATERIAL #
0RED0BOXZ
REDBOX
0RED0BOXZXNG
REDBOXNG
0RED0BOXZXNGA
Low Profile MINI® Module (Module 1)
MATERIAL #
MATERIAL #
CATALOG #
0RBOX001Z
RBOX1
0RBOX002Z
CATALOG #
0RBOX002ZXA
RBOX2
LMIN005.V
5A LOW PROFILE MINI FUSE
5
JCAS020.V
JCASE 32V S/B BOX 20A
2
LMIN07.5V
7.5A LOW PROFILE MINI FUSE
10
JCAS030.V
JCASE 32V S/B BOX 30A
2
LMIN010.V
10A LOW PROFILE MINI FUSE
10
JCAS040.V
JCASE 32V S/B BOX 40A
2
LMIN015.V
15A LOW PROFILE MINI FUSE
10
JCAS050.V
JCASE 32V S/B BOX 50A
2
LMIN020.V
20A LOW PROFILE MINI FUSE
5
JCAS060.V
JCASE 32V S/B BOX 60A
2
LMIN025.V
25A LOW PROFILE MINI FUSE
5
00970053Z
JCASE PULLER
1
LMIN030.V
30A LOW PROFILE MINI FUSE
10
00970038Z
ATO/MINI PULLER ( WHITE )
1
Blade Fuse Module (Module 3)
MATERIAL #
PAL Module
MATERIAL #
CATALOG #
0RBOX003Z
(Module 4)
CATALOG #
0RBOX004Z
RBOX3
CATALOG #
0RBOX005Z
JCASE® Module (Module 2)
MATERIAL #
Glass Module (Module 5)
RBOX4
RBOX5
0AGC001.V
AGC GLASS BOX 1A
10
0AGC002.V
AGC GLASS BOX 2A
10
0AGC003.V
AGC GLASS BOX 3A
10
0AGC004.V
AGC GLASS BOX 4A
10
0AGC005.V
AGC GLASS BOX 5A
10
0AGC006.V
AGC GLASS BOX 6A
10
0AGC007.5V
AGC GLASS BOX 7.5A
10
0AGC010.V
AGC GLASS BOX 10A
10
0AGC015.V
AGC GLASS BOX 15A
10
0AGC020.V
AGC GLASS BOX 20A
10
0AGC025.V
AGC GLASS BOX 25A
10
0AGC030.V
AGC GLASS BOX 30A
10
0AGW030.V
AGW GLASS BOX 30A
10
0AGX030.V
AGX GLASS BOX 30A
10
0SFE004.V
SFE GLASS BOX 4A
10
0SFE009.V
SFE GLASS BOX 9A
10
0SFE014.V
SFE GLASS BOX 14A
10
0ATO005.V
ATO BLADE FUSE BOX 5A
10
0PAL020.X
FEMALE TERM BOX 20A
1
0SFE020.V
SFE GLASS BOX 20A
10
0ATO07.5V
ATO BLADE FUSE BOX 7.5A
10
0PAL030.X
FEMALE TERM BOX 30A
1
0SFE030.V
SFE GLASS BOX 30A
10
0ATO010.V
ATO BLADE FUSE BOX 10A
25
0PAL040.X
FEMALE TERM BOX 40A
1
Puller Tester
1
0ATO015.V
ATO BLADE FUSE BOX 15A
25
0PAL050.X
FEMALE TERM BOX 50A
1
0ATO020.V
ATO BLADE FUSE BOX 20A
25
0PAL060.X
FEMALE TERM BOX 60A
1
0ATO025.V
ATO BLADE FUSE BOX 25A
25
0PAL130.X
STRAIGHT MALE TERM BOX 30A
1
0ATO030.V
ATO BLADE FUSE BOX 30A
25
0PAL160.X
STRAIGHT MALE TERM BOX 60A
1
0ATO040.V
ATO BLADE FUSE BOX 40A
10
0PAL180.X
STRAIGHT MALE TERM BOX 80A
1
0MIN005.V
MINI BLADE FUSE BOX 5A
10
0PAL1100.X
STRAIGHT MALE TERM BOX 100A
1
MIC2005.V
MICRO2 Fuse 5A
10
0MIN07.5V
MINI BLADE FUSE BOX 7.5A
10
0PAL1120.X
STRAIGHT MALE TERM BOX 120A
1
MIC207.5V
MICRO2 Fuse 7.5A
10
0MIN010.V
MINI BLADE FUSE BOX 10A
20
0PAL230.X
13/16" BENT MALE TERM BOX 30A
1
MIC2010.V
MICRO2 Fuse 10A
10
0MIN015.V
MINI BLADE FUSE BOX 15A
20
0PAL240.X
13/16" BENT MALE TERM BOX 40A
1
MIC2015.V
MICRO2 Fuse 15A
10
0MIN020.V
MINI BLADE FUSE BOX 20A
20
0PAL250.X
13/16" BENT MALE TERM BOX 50A
1
MIC2020.V
MICRO2 Fuse 20A
10
0MIN025.V
MINI BLADE FUSE BOX 25A
10
0PAL260.X
13/16" BENT MALE TERM BOX 60A
1
MIC2025.V
MICRO2 Fuse 25A
10
0MIN030.V
MINI BLADE FUSE BOX 30A
10
0PAL270.X
13/16" BENT MALE TERM BOX 70A
1
MIC3005.V
MICRO3 Fuse 5A
10
0MAX020.V
MAXI BLADE BOX 20A
2
0PAL280.X
13/16" BENT MALE TERM BOX 80A
1
MIC307.5V
MICRO3 Fuse 7.5A
10
0MAX030.V
MAXI BLADE BOX 30A
2
0PAL2100.X
13/16" BENT MALE TERM BOX 100A
1
MIC3010.V
MICRO3 Fuse 10A
10
0MAX040.V
MAXI BLADE BOX 40A
2
0PAL2120.X
13/16" BENT MALE TERM BOX 120A
1
MCAS020.V
MCASE Fuse 20A
10
0MAX050.V
MAXI BLADE BOX 50A
2
0PAL330.X
MINI FEMALE TERM BOX 30A
1
MCAS025.V
MCASE Fuse 25A
10
0MAX060.V
MAXI BLADE BOX 60A
2
0PAL340.X
MINI FEMALE TERM BOX 40A
1
MCAS030.V
MCASE Fuse 30A
10
0MAX070.V
MAXI BLADE BOX 70A
1
0PAL430.X
9/16" BENT MALE TERM BOX 30A
1
MCAS040.V
MCASE Fuse 40A
10
0MAX080.V
MAXI BLADE BOX 80A
1
0PAL440.X
9/16" BENT MALE TERM BOX 40A
1
LJCA020.V
LOW PROFILE JCASE 20A
10
00970019X
FUSE TESTER AND PULLER BOX
1
0PAL450.X
9/16" BENT MALE TERM BOX 50A
1
LJCA025.V
LOW PROFILE JCASE 25A
10
00970038Z
ATO/MINI PULLER ( WHITE )
1
0PAL480.X
9/16" BENT MALE TERM BOX 80A
1
LJCA030.V
LOW PROFILE JCASE 30A
10
00970026N
MAXIFUSE PULLER BOX
1
0PAL4100.X
9/16" BENT MALE TERM BOX 100A
1
LJCA040.V
LOW PROFILE JCASE 40A
10
FHAC0002Z
ATO HD INLINE FUSEHOLDER BOX
1
0PAL525.X
LOCKING FEMALE TERM BOX 25A
1
LJCA050.V
LOW PROFILE JCASE 50A
10
0FHM0002Z
MINI HD INLINE FUSEHOLDER BOX
1
0PAL530.X
LOCKING FEMALE TERM BOX 30A
1
LJCA060.V
LOW PROFILE JCASE 60A
10
www.littelfuse.com
34
MICRO2, MICRO3, MCase®,
LPJCASE® Module (Module 6)
MATERIAL #
0RBOX006Z
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Retail
Modular Rack Systems
The new MRS Modular Rack System is a flexible offering of
fuses that can ordered based on your needs. Each rack is sold
individually and can be locked together to sit on a counter, or
wall mounted. They are also available as a complete kit. Size
charts, and color identification charts are included to serve as a
guide for easy identification and replacement.
0MRS0001ZXA 0MRS0002ZXA
ATO:
MINI/MAXI:
(5) MIN2
(5) MIN3
(5) MIN4
(10) MIN5
(10) MIN7.5
(15) MIN10
(20) MIN15
(20) MIN20
(15) MIN25
(15) MIN30
(2) MAX20
(3) MAX30
(2) MAX40
(2) MAX50
(3) MAX60
(5) ATO1
(5) ATO2
(5) ATO3
(5) ATO4
(10) ATO5
(10) ATO7.5
(15) ATO10
(15) ATO15
(20) ATO20
(10) ATO25
(15) ATO30 (5) ATO40
0MRS0003ZXA
GLASS/CERAMIC:
(5) AGC1
(5) AGC2
(10) AGC3
(5) AGC5
(5) AGC7.5
(10) AGC10
(20) AGC15
(20) AGC20
(10) AGC25
(30) AGC30
(5) AGW15
0MRS0004ZXA
PAL/MEGA:
(5) AGW20
(10) SFE4
(10) SFE7.5
(10) SFE9
(10) SFE14
(30) SFE20
(10) SFE30
(10) GBC8
(10) GBC16
(10) GBC25
(2) PAL20
(4) PAL30
(3) PAL40
(3) PAL50
(2) PAL60
(1) PAL130
(2) PAL160
(3) PAL180
(2) PAL1100
(2) MEG 175
0MRS0007ZXA
0MRS0005ZXA
PAL/JCASE:
(1) PAL1120
(1) PAL230
(1) PAL240
(1) PAL250
(1) PAL260
(1) PAL270
(1) PAL280
(1) PAL2100
(1) PAL2120
(1) JCAS20
(2) JCAS30
(1) PAL330
0MRS0006ZXA
ATO/MINI ASST’S:
(1) PAL340
(1) PAL430
(1) PAL440
(1) PAL450
(1) PAL480
(1) PAL4100
(1) PAL525
(1) PAL530
(1) JCAS40
(1) JCAS50
(1) JCAS60
(12) 094202B
(12) 094362B 0MRS0009ZXA
MICRO2/MICRO3/MCASE:
MIC2 5
MIC2 7.5
MIC2 10
MIC2 15
MIC2 20
MIC2 25
MIC2 30A
MIC3 5
MIC3 7.5
MIC3 10
MIC3 15
MCAS 15
MCAS 20
MCAS 25
MCAS 30
MCAS 40
MRS3E
MODULAR RACK TABLE
BOXED
MATERIAL #
DESCRIPTION
CATALOG #
CONTENTS
0MRS0200Z
MRS200
ATO®-MINI®-Maxi Modular Rack System
MRS Racks 1 & 2 (Assembled)
0MRS0200ZXE
MRS200E
EMPTY ATO®-MINI®-Maxi Modular Rack System
MRS Rack with ATO®-MINI®-Maxi graphics (only)
0MRS0200ZXMA
MRS200MA
Marine Fuse Modular Rack System
MRS Rack with ATO®-MINI®-Maxi -Glass graphics (only)
0MRS0300Z
MRS300
ATO®-MINI®-Maxi-Glass Modular Rack System
MRS Racks 1, 2 & 3 (Assembled)
0MRS0300ZXE
MRS300E
EMPTY ATO®-MINI®-Maxi-Glass Modular Rack System
Empty MRS Rack with “Glass” header (only)
CARDED
DESCRIPTION
MATERIAL #
CATALOG #
0MRS0001Z
MRS1
ATO® Modular Rack System
0MRS0002Z
MRS2
MINI®-Maxi Modular Rack System
0MRS0003Z
MRS3
Glass Modular Rack System
0MRS0003ZXE
MRS3E
Empty Glass Modular Rack System
0MRS0004Z
MRS4
PAL-Mega Modular Rack System
0MRS0005Z
MRS5
PAL-JCASE® Modular Rack System
0MRS0006Z
MRS6
ATO®-MINI® Modular Rack System
0MRS0007Z
MRS7
Modular Rack System Complete (MRS 1, 2, 3, 4, 5 & 6)
0MRS0009ZXA
MRS9
ACS Micro2/Micro3/MCase Modular Rack System
©2016 Littelfuse Automotive Aftermarket Circuit Protection
35
21
www.littelfuse.com
Retail
Value Pack Kits
The Littelfuse Value Packs contain a complete assortment of OEM fuses. Value Packs give you the
tools for the protection you need — when and where you need it!
The Ultimate fuse kit for home and shop comes in a clear plastic, reusable package.
MATERIAL #
CATALOG #
DESCRIPTION
00940400Z
094400
ATO® Super Value Pack 40pc
00940462Z
094462
MINI® Super Value Pack 40pc
00940475Z
094475
ATO , MINI®, MAXI Super Value Pack 21pc
00940550Z
094550
MINI® /JCASE® Super Value Pack 29pc
00940554Z
---
Low Profile MINI® / Low Profile JCASE®
Super Value Pack 30pc
00940557ZXA
---
AGC Glass Super Value Pack 40pc
00940566ZXA
---
Micro2/Micro3 Super Value Pack 60pc
®
Fuse Assortment Kits
Littelfuse assortments contain a variety of a type of fuse for your specific needs.
MATERIAL #
CATALOG #
DESCRIPTION
00940133ZP
94133
European Fuse Assortment
00940134ZP
94134
British Fuse Assortment
00940135ZP
94135
Japanese Fuse Assortment
1 each: AGC 5A, 10A, 15A, 20A (SFE 20), 30A Fuses
00940154ZP
94154
American Fuse Assortment
1 each: AGC 10A, 15A, 30A & 1 each: SFE 9A, 14A, 20A Fuses
00940189ZP
94189
Cellular Fuse Assortment
1 each: AGC 1.5A, 3A Fuses & 3 each: AGC 2A Fuses
00940202ZP
94202
ATO Fuse Assortment 6pc
1 each: ATO 5A, 10A, 15A, 20A, 25A, 30A Fuses
00940301ZP
00940362ZP
00940408ZP
00940412ZP
00940416Z
00940500Z
00940506ZP
00940558ZPA
94301
94362
94408
94412
94416
94500
94506
---
Japanese ATO Fuse Assortment
Mini Fuse Assortment
Computer Fuse Assortment
Electric Fence Assortment
ATO Fuse Assortment (boxed only)
Mini Fuse Assortment (boxed only)
Low Profile Mini Fuse Assortment
Micro2 Fuse Assortment
00940559ZPA
---
MCase Fuse Assortment
0AGA0001ZP
AGA1ZP
AGA Glass Fuse Assortment
0AGC0001ZP
0AGW0001ZP
0SFE0001ZP
AGC1ZP
AGW1ZP
SFE1ZP
AGC Glass Fuse Assortment
AGW/AGX Glass Fuse Assortment
SFE Glass Fuse Assortment
CONTENTS
2 each: GBC 8A, 16A Fuses & 1 each: GBC 25 A
1 each: AGC 7.5A, 15A, 20A (SFE 20) 1 each: 03000128M Amp Fuses
1 each: ATO 5A, 7.5A, 10A, 15A, 20A Fuses
1 each: MINI 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A
1 each: AGC .5A Fuses & 2 each: AGC 1A, 2A Fuses
5 each: AGC 1A Fuses
1 each: ATO 10A, 15A, 20A, 25A, 30A Fuses
1 each: MINI 10A, 15A, 20A, 25A, 30A Fuses
1 each: LMIN 7.5A, 10A, 15A, 20A, 25A, 30A Fuses
1 each: Micro2 5A, 10A, 15A, 20A, 25A Fuses
1 each: 15A, 20A, 25A, 30A, 40A Fuses
1 each: AGA 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Fuses
1 each: AGC 1A, 2A, 2.5A, 3A, 4A, 5A, 6A, 7.5A, 8A, 10A, 15A, 20A, 25A, 30A, 35A Fuses
1 each: AGW 3A, 4A, 5A, 15A, 20A, 30A Fuses 1 each: AGX 3A, 20A, 25A, 30A Fuses
1 each: SFE 4A, 6A, 7.5A, 9A Fuses & 2 each: 14A, 20A, 30A Fuses
Smart Glow
CATALOG #
DESCRIPTION
00940202ZPGLO
10-1008
ATO SmartGlow Assortment 5 PK
00940362ZPGLO
11-1008
Mini SmartGlow Assortment 5 PK
1 each: MINI 10A, 15A, 20A, 25A, 30A Fuses
00940400ZGLO
14-0000
ATO SmartGlow Assortment 42 PK
7 each: ATO GLO 5A, 10A, 15A, 20A, 25A, 30A Fuses
00940462ZGLO
15-0000
Mini SmartGlow Assortment 36 PK
6 each: MINI GLO 5A, 10A, 15A, 20A, 25A, 30A Fuses
00940555ZPGLO
---
ATO SmartGlow Assortment 5 PK w/ Flashlight
1 each: ATO GLO 10A, 15A, 20A, 25A, 30A Fuses &
(1) MINI Keychain LED Flashlight
Mini SmartGlow Assortment 5 PK Display Strip
1 each: Perforated Display Strip, S Hook
1 each: MINI GLO 10A, 15A, 20A, 25A, 30A Fuses &
(1) MINI Keychain LED Flashlight
1 each: MINI GLO 10A, 15A, 20A, 25A, 30A Fuses &
(1) MINI Keychain LED Flashlight
00940556ZPDSGLO 094556DSGLO
00940556ZPGLO
094556
Mini SmartGlow Assortment 5 PK w/ Flashlight
0AGC0001ZPGLO
16-1008
AGC Glass Assortment 5 PK
0SFE0001ZPGLO
---
SFE Glass SmartGlow Fuse Assortment 5 PK
www.littelfuse.com
CONTENTS
1 each: ATO 10A, 15A, 20A, 25A, 30A Fuses
1 each: AGC 5A, 10A, 15A, 20A, 30A Fuses
1 each: SFE 7.5A, 9A, 14A & 2 each: 20A Fuses
36
®
Fuse
MATERIAL #
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Retail
Emergency Kits
Available in OEM ATO® and MINI® fuse versions. The Littelfuse Emergency Diagnostic Fuse Kits are ideal for the glove box
or trunk offering instant protection in the garage or on the road. Packaging designed to generate impulse sales. Contains the
most popular amperages. Includes roadside tester/puller that tests, removes and installs fuses. Has its own power source that allows it to operate with
or without voltage to a maximum of 24 volts.
MATERIAL #
CATALOG #
DESCRIPTION
00940363ZP
094363
MINI Emergency Fuse Kit
00940365ZP
094365
Motorcycle Glass Emergency Kit
1 each: AGX 5A, 10A, 15A, 20A Fuses 2 each: AGX 8A Fuses (1) Puller
00940366ZP
094366
Motorcycle ATO Emergency Kit
1 each: ATO 5A, 7.5A, 10A, 15A, 20A Fuses (1) Puller
00940367ZP
094367
American Glass Emergency Kit
1 each: SFE 9A, 14A, 20A
00940368ZP
094368
European GBC Emergency Kit
1 each: GBC 5A, 16A, 25A Fuses 2 each: GBC 8A Fuses (1) Puller
00940369ZP
094369
Japanese Glass Emergency Kit
1 each: AGC 5A, 10A, 15A, 20A, 30A Fuses (1) Puller
®
®
CONTENTS
1 each: MINI 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Fuses (1) Puller
1 each: AGC 5A, 15A, 30A Fuses (1) Puller
00940370ZP
094370
ATO Emergency Kit
00940418ZP
094418
ATO® Emergency Diagnostic Kit
00940419ZP
094419
Glass Emergency Fuse Kit
00940461ZP
094461
MINI Emergency Diagnostic Kit
1 each: MINI 3A, 4A, 7.5A, 10A, 15A, 20A, 25A, 30A Fuses (1) ATO/MINI Tester/Puller
00940479ZP
094479
ATO®/MINI® Emergency Diagnostic Kit
1 each: ATO 5A, 10A, 15A, 20A, 25A, 30A 1 each: MINI 3A, 5A, 7.5A, 10A, 15A, 20A,
25A, 30A Fuses (1) Puller
00940441ZP
---
Low Profile MINI Emergency Fuse Kit
1 each: LP Mini 2A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Fuses, (1) Puller
00940442ZP
---
MCase, Micro2, Micro3 Emergency Kit
1 each: MCase 15A, 20A, 25A, 30A, 40A Fuses, (1) MCase Puller
1 each: Micro2 5A, 7.5A, 10A, 15A, 20A, 25A, 30A Fuses
1 each: Micro3 5A, 7.5A, 10A, 15A Fuses, (1) Micro2/3 Puller
00940561ZPA
---
OEM Emergency Kit - GM
1 each: MINI 7.5A, 25A, 30A 1 each: LP MINI 10A, 15A 1 each: JCASE 20A, 30A,
40A, 50A 1 each: LPJCASE 30A, 40A, 2 each: MINI 20A 3 each: MINI 10A, 15A
00940562ZPA
---
OEM Emergency Kit - Ford
1 each: MINI 7.5A, 25A, 30A 1 each: LP MINI 10A, 15A 1 each: JCASE 20A, 30A,
40A, 50A 1 each: LPJCASE 30A, 40A, 2 each: MINI 20A 3 each: MINI 10A, 15A
00940563ZPA
---
OEM Emergency Kit Chrysler/Dodge/Jeep
1 each: MINI 7.5A, 25A, 30A 1 each: JCASE 20A, 30A, 40A, 50A 2 each: MINI 20A
3 each: MINI 10A, 15A
®
®
1 each: ATO 5A, 10A, 15A, 20A, 25A, 30A Fuses (1) Puller
1 each: ATO 5A, 10A, 15A, 20A, 25A, 30A Fuses (1) ATO Puller
1 each: AGC 7.5, 15A, 20A, 25A, 30A (1) Glass Puller
21
©2016 Littelfuse Automotive Aftermarket Circuit Protection
37
www.littelfuse.com
Retail
Planogram
We developed the next generation of Retail
Circuit Protection.
You now can fit more product in the same
planogram space — 36% more.
MORE SPACE
for higher margin kits and assortments.
OVER 70% GREATER PROFIT POTENTIAL
per square foot with additional SKU’s
DOUBLE PLANOGRAM PERFORMANCE
100% increase in retail dollar sales per square foot
INCREASE MARKET COVERAGE
with high amp JCASE, MAXI and PAL Auto Link fuses
OEM SYMBOL
RECLOSABLE
Prominent on package assures consumers of quality and
actual OE replacement.
Keeps key marketing data with package until completely
consumed.
COLOR CODED
MULTI-LINGUAL
for easier stocking and consumer selection.
One SKU covers US, Canadian, German and
Latin American markets.
MATERIAL #
CATALOG #
DESCRIPTION
00940477Z
094477
ur 87 SKU, 510-piece pre-pack Plan-O-Gram includes full blade-fuse coverage, as well as expanded coverage into newer parts such
O
as Low-Profile MINI, Low-Profile JCASE, MICRO2, MICRO3, MCASE and Emergency Kits. Includes blade fuses, glass fuses, circuit
breakers, Assortment and Emergency kits, fuse holders and fuse tester/pullers. Measures approximately 36"x36".
00940478Z
094478
Our 103 SKU, 625-piece pre-pack Plan-O-Gram is our largest retail assortment featuring multiple facings of the most popular items.
This assortment expands your line coverage to fill the needs of your DIY and professional dealer/installer customers as well.
Measures approximately 48"x32".
Graphics
Header Cards
An attractive header card is available for Littelfuse Circuit
Protection product displays. Measures 36" wide x 8" high or
48" X 8" high.
AUTOMOTIVE FUSES & ACCESSORIES
MICRO2TM / MICRO3TM
A
MINI®
AVAILABL
LSO
Fuse
®
JCASE®
AVAILABL
LSO
®
MCASETM
MAXI
GLASS/CERAMIC
PAL®
MEGA®
FLASHERS
CIRCUIT BREAKERS
AVAILABL
LSO
E IN
®
LOW PROFILE
MINI®
LOW PROFILE
JCASE®
AA980
www.littelfuse.com
ATO®
E IN
48" X 8" Display Header
for 48" Planogram (PART# 00940478Z)
E IN
AA980
A
36" X 8" Display Header
for 36" Planogram (PART# 00940477Z)
Fuse
AA979
A
DESCRIPTION
Fuse
MATERIAL #
38
©2016 Littelfuse Automotive Aftermarket Circuit Protection
Reference
Packaging / Part Numbering
Bulk Carton
The outer corrugated cardboard box
that holds several cartons.
Carton
The outer corrugated
cardboard box that holds
several inner packs, or bulk
fuses (no inner packs).
Pill Box
A small plastic box containing
fuses. Pillboxes are snap-shut
resealable.
Blister Pack
A retail package containing
one or several identical
products, such as fuses, or it
may contain an assortment
of fuses. Blister packs are
designed to fit on a peghook. ‘Bubble pack’ or
‘clamshell’ packages are
blister packs.
Inner Pack
A small chipboard
box containing
several blister packs
or pillboxes.
21
©2016 Littelfuse Automotive Aftermarket Circuit Protection
39
www.littelfuse.com
Reference
Standard Fuse Packaging
Boxed Merchandise
Stnd. Pack
Order
ATO , MINI Fuses
5 to a box
100 (twenty 5 packs)
by piece
Glass Ceramic Fuses
5 to a box
50 (ten 5 packs)
by piece
10 to a box
10 (one 10 pack)
by piece
1 to a pack
10
by piece
Flashers, Circuit Breakers, Fuseholders
1 to a pack
10
by piece
Retail Packaged Merchandise
Fuses/Card
Stnd. Pack
Order
5 to a card
5 cards/shelf pack
by card
MAXI, PAL, MEGA , MIDI Fuses
1 to a card
5 cards/shelf pack
by card
Plus Packs
25
5 cards/shelf pack
by card
Retail Carded Kits and Assortments
Various
5 cards/shelf pack
by card
Assortments, Jobber Boards, Merchandisers, etc.
Various
Single unit
by unit
®
Pieces/Box
®
AGU Fuses
®
MAXI, PAL, MEGA , MIDI
®
®
®
ATO , MINI Fuses, Glass, Ceramic Fuses
®
®
Examples of order numbers
Order numbers must have between 9 characters and 15
characters. These are for added description, such as ZXPRO.
When you place an order, write or type the characters without
a break in the string.
Mandatory characters
First set of four:
These identify the product group, like LMIN
(Low profile MINI fuse) or 0MAX (MAXI fuses).
0ATO 0 1 0 . VP
Second set of four:
These identify the product subgroup. In
fuses, this usually identifies the amperage.
The decimal point counts as one character,
eg 010. = 10A, 100. = 100A, 01.5 = 1.5A.
First set of four
“ATO Fuses”
Second set of four
“10 Amps”
“Retail pack of 5”
0MIN 0 3 0 . ZXPRO
First set of four
“MINI Fuses”
Second set of four
“30 Amps”
“Professional Pack”
9th character:
Inner pack quantity. See list of codes below.
Inner Pack Codes
Quantity Code
l =X
500 = u
5=V
1000 = M
10 = T
1500 = D
20 = s
2500 = E
50 = L
3000 =W
100 = H
4000 = y
200 = F
5000 = N
250 = G
10 000 = K
Optional characters
10th Character
Packaging type. P= Retail pack, B=Blister Pack.
Last set of 5:
May be used to give additional information,
like MXGLO for SmartGlow fuses
www.littelfuse.com
40
©2016 Littelfuse Automotive Aftermarket Circuit Protection
15A
20A
25A
Blue
Yellow
Clear
Orange
Green
10A
Red
www.littelfuse.com
White
5A
®
AVAILABLE IN
5A
4A
3A
2A
Low
Profile
MINI®
LSO
®
5A
3A
®
AGU
25A
40A
60A
20A
50A
30A
Low
Profile
JCASE®
SFE14
AGC, SFE20, UK
40A
30A 30A 30A
30A
40A
25A
60A
20A
50A
30A
15A
25A 25A 25A
20A 20A 20A
15A 15A 15A
10A 10A 10A
7.5A 7.5A 7.5A
5A
3A
®
Fuse
25A
20A
15A
10A
7.5A
AGY, SFE30
MICRO 2 ONLY
30A
MICRO 2 ONLY
MICRO 2 ONLY
5A
7.5A
4A
Pink
Tan
3A
Violet
Brown
2A
Gray
AVAILABLE IN
LSO
MINI® MCASE® JCASE®
A
TYPE
1A
A
Black
MICRO3
ATO®
Fuse
MICRO2
Fuse
Fuse
ACTUAL SIZE
41
GLASS
®
40A
30A
80A
20A
60A
50A
70A
100A
AGW, SFE7.5, SFE9
40A
30A
80A
20A
60A
50A
AVAILABLE IN
AGX
A
70A
LSO
MAXI
®
Fuse
AGA, SFE4
SFE6
175A
150A
125A
100A
200A
80A
225A
250A
MEGA®
AGA
1A, 1.5A, 2A,
2.5A, 3A, 5A,
6A, 7.5A, 10A,
15A, 20A,
25A, 30A
40A
60A
20A
50A
30A
Female
Terminal
PAL
Series 0
AGC
.5A, 1A, 1.5A, 2A,
2.5A, 3A, 4A, 5A,
6A, 7.5A, 8A, 10A,
15A, 20A, 25A,
30A, 35A
60A
100A
30A
120A
80A
Straight
Male
Terminal
PAL
Series 1
PAL
Series 3
40A
60A
100A
50A
70A
30A
140A
120A
80A
AGW
1A, 1.5A,
2.5A, 3A, 4A,
5A, 6A, 15A,
20A, 30A
40A
30A
AGX
2A,
3A,
20A,
25A,
30A
Mini
13/16" Bent
Female
Male
Terminal Terminal
PAL
Series 2
AGU
1A, 2A, 3A, 4A,
5A, 10A, 15A,
20A, 25A, 30A,
35A, 40A, 50A,
60A
FUSE SELECTION CHART
Fuse
©2016 Littelfuse Automotive Aftermarket Circuit Protection
AGY
50A
SFE
4A, 6A,
7.5A,
9A, 14A,
20A, 30A
120A
40A
100A
50A
30A
140A
80A
9/16" Bent
Male
Terminal
PAL
Series 4
UK
35A,
50A
30A
25A
Locking
Female
Terminal
PAL
Series 5
FUSE HOLDER SELECTION CHART
ATO® Fuse In-Line Fuseholder with
Protective Cap
Use with ATO® Fuse 1 to 20 amps.
Part Number: FHAC1
ATO® Fuse Heavy Duty In-Line
Fuseholder with Protective Cap
Use with ATO® 25 and 30 amp fuses
for air conditioner or other heavy
duty applications.
Part Number: FHAC2
ATO® Fuse In-Line Fuseholder
Use with ATO® Fuse 1 to 20 amps.
ATO®
ATO® Fuse In-line Panel Mount
Fuseholder
Versatile for in-line or snap mount panel
applications. Interlock body design allows
fuseholders to be snapped together. Use
with ATO® Fuse 1 to 20 amps.
Part Number: AFH1
ATO® Fuse Heavy Duty In-line Panel
Mount Fuseholder
Use with ATO® Fuse 25 and 30 amp fuses.
Part Number: AFH2
®
ATO® and MINI® SMARTGLOW Fuse
In-line Fuseholder with Protective Cap
Clear housing to display SmartGlow fuse.
Use with ATO® Fuse 1 to 20 amps and
MINI® Fuse 2 to 20 amps.
ATO® & MINI®
ATO® Fuse Heavy Duty In-Line
Fuseholder
Use with ATO® 25 and 30 amp fuses
for air conditioner or other heavy
duty applications. FHA30 includes
30 amp fuse.
Part Number: 20-1010 (ATO®), 20-1020 (MINI®)
Part Number: FHA1
Part Number: FHA2, FHA30
MINI®
MINI® Fuse In-line Fuseholder with
Protective Cap
Use with MINI® Fuse 2 to 20 amps.
Part Number: FHM1
MINI® Fuse Heavy Duty In-Line
Fuseholder with Protective Cap
Use with MINI® Fuse 25 and 30
amp fuses.
Part Number: FHM2
MAXI
MAXI™ Fuse In-line Fuseholder
with Protective Cap
Use with MAXI™ Fuse up to 60
amps.
Part Number: MAH1
GLASS
Universal Glass Bayonet Knob
In-line Fuseholder
Use with Glass SFE 71/2, 9, 14, 20,
AGA, AGC, AGW and AGX Fuses
up to 20 amps when proper spring
is installed.
Part Number: FHP1
Universal Glass Twist-Lock
In-line Fuseholder
Use with Glass SFE 4, 6, 71/2, 9,
14, 20, AGA, AGC, AGW and AGX
Fuses up to 20 amps.
Part Number: FNY1
Glass Fuse Heavy Duty 30 Amp
In-line Fuseholder
Spring loaded heavy duty glass
fuseholder includes AGC 30 amp
fuse for GM air conditioner, heater
blower motors or other heavy duty
applications. FNY 20 includes 20A
AGC Fuse.
Part Number: FNY30, FNY20
Additional Fuse Holders are available.
©2016 Littelfuse Automotive Aftermarket Circuit Protection
42
www.littelfuse.com
Fuse
Reference
Cross Reference Guide
Competition
Littelfuse
Competition
Littelfuse
Competition
Littelfuse
15600-06-20
15600-06-20
BP/15600-06-20
BP/15600-06-20
BP/A-5
ACB 20
BP/ACB 20
AGA(Amp)
BP/AGA(Amp)
AGC(Amp)
BP/AGC(Amp)
AGU(Amp)
AGW(Amp)
BP/AGW(Amp)
AGX(Amp)
BP/AGX(Amp)
AGY 50
AK-6
ANL (BY AMPERE)
ANN (BY AMPERE)
AT-7
ATC(Amp)
BP/ATC(Amp)
VP/ATC(Amp)
ATM(Amp)
BP/ATM(Amp)
VP/ATM(Amp)
CB1911-(Amp)
CB1921-(Amp)
CB212-(Amp)
CB2221-(Amp)
CB-5
CBC(Amp)
CBC(Amp)B
BP/CBC-(Amp)B
CBF(Amp)
BP/CBF(Amp)
CCB 25
BP/CCB 25
CCB 30
BP/CCB 30
EF-5
EK-7
FCB 20
BP/FCB 20
FP-A3
FT-2
FT-3
UK-6
FLF(Amp)
350417
350418
350417BP
340418BP
094294
ACB20
ACB20BP
AGA(Amp)
AGA(Amp)BP
AGC(Amp)
AGC(Amp)BP
AGU(Amp)
AGW(Amp)
AGW(Amp)BP
AGX(Amp)
AGX(Amp)BP
AGY 50
094202
CNL (BY AMPERE)
CNN (BY AMPERE)
094370
ATO(Amp)
ATO(Amp)BP
ATO(Amp)PRO
MIN(Amp)
MIN(Amp)BP
MIN(Amp)PRO
MCB(Amp)
MXB(Amp)
MIB(Amp)
MNB(Amp)
094189
8120(Amp)ST
8130(Amp)ST
8130(Amp)BP
CBF(Amp)
CBF(Amp)BP
CCB25
CCB25BP
ACB30
ACB30BP
094412
094367
FCB20
FCB20BP
097023
097019
097019
094154
PAL0(Amp)
BP/FLF(Amp)
FLM(Amp)
BP/FLM(Amp)
FLB(Amp)
BP/FLB(Amp)
FLS(Amp)
BP/FLS(Amp)
FLD(Amp)
BP/FLD(Amp)
FLN(Amp)
BP/FLN(Amp)
FMX(Amp)
BP/FMX(Amp)
BP/FP-A3
BP/FT-2
BP/FT-3
GBC(Amp)
BP/GBC(Amp)
BP/HHA
HHC
HHD
HHD-12
HHD-30
HHF
HHG
HHK
HHL
HHM
HHN
HHX
HKP-CC
HKP-HH
HMK
BP/HHC
BP/HHD
BP/HHD 30
BP/HHF
BP/HHG
BP/HHH
BP/HHK
BP/HHL
BP/HHM
BP/HHN
BP/HKP-CC
BP/HKP-HH
BP/HL
BP/HMK
HRK
HTB-22M
HTB-261
PAL0(Amp)BP
PAL1(Amp)
PAL1(Amp)BP
PAL2(Amp)
PAL2(Amp)BP
PAL3(Amp)
PAL3(Amp)BP
PAL4(Amp)
PAL4(Amp)BP
PAL5(Amp)
PAL5(Amp)BP
JCAS(Amp)
JCAS(Amp)BP
097023BP
097019BP
097019BP
GBC(Amp)
GBC(Amp)BP
FHA200BP
FHA1
FHA2
094303
FHA30
FHAC1
FHAC2
FNY1
FHM1
FHM2
FNY30
MAH1
3453LF2A
3453LF8A
FNY30
FHA1BP
FHA2BP
FHA30BP
FHAC1BP
FHAC2BP
FHM200BP
FNY1BP
FHM1BP
FHM2BP
FNY30BP
3453LF2C
3453LF8C
094413
FNY30BP
FHP1
3453LF2A
3453LF8A
KB-7
KE-5
KG-5
KG-7
KJ-5
KJ-7
KJA-6
KJA-7
KM-8
KM-9
MAX(Amp)
BP/MAX(Amp)
MDL(Amp)
MKA-5
MKA-6
MKG-6
MKG-7
NO. 18
NO. 26
NO. 42
NO. 45
NO. 70
NO. 95BK
NO. 100BK
NO. 150(EMPTY)
NO. 160BK
NO. 200(EMPTY)
NO. 201
NO. 204(EMPTY)
NO. 245
NO. 245(EMPTY)
NO. 500(EMPTY)
S-8202-(Amp)
BP/S-8202-2
BP/S-8202-4
S-8301-(# of poles)
UCB(Amp)
BP/UCB(Amp)
SFE(Amp)
BPSFE(Amp)
094419
094134
094133
094368
094135
094369
094301
094370
094362
094363
MAX(Amp)
MAX(Amp)BP
313(Amp)
094366
094366
094365
094365
094292
094263
094400
094375
094374
094422
094409
MRS300E
094410
MRS300E
097396
MRS300E
094360
MRS300E
MRS300E
035408(Amp)ZXGY
OMN2BP
OMN4BP
3460(# of poles)
UCB(Amp)
UCB(Amp)BP
SFE(Amp)
SFE(Amp)BP
NOTES
©2016 Littelfuse Automotive Aftermarket Circuit Protection
43
www.littelfuse.com
Littelfuse, Inc.
8755 West Higgins Road Suite 500
Chicago, IL, 60631 USA
773-628-1000
© 2016 Littelfuse, Inc. Printed in the USA
Speficiations, description and illustrative material in this literature are as accurate as known at the time of publication,
but are subject to changes without notice. Visit www.Littelfuse.com for the most up-to-date technical information.
AA-101-D

Open as PDF

Similar pages: Consumer Aftermarket Product Catalog; Bussmann; Littelfuse Automotive and CVP Transportation Catalog 2012; Datasheet; Layout 11 - NTE Electronics; online catalog - Cooper Bussmann; Download; Datasheet; MAXIM MAX5131BEEE; Datasheet; Datasheet; PDF; View Automotive Passenger Car Catalog; Datasheet; FUSE SELECTION CHART; Datasheet; International Automotive Aftermarket Catalog; Datasheet; ROHM TCA1A475M; LITTELFUSE 995; MAS MAS6501BA1ST206; LITTELFUSE 0895060