Features #14−2 Compression Lugs with .250” (6.35mm) QC Terminals Silver Cadmium Oxide Contacts UL 508 File No. E227250 Class NLDX2, NLDX8 RLY560 Series Contactors, Definite Purpose, 60 FLA, 3 Pole NO D93 3.770 (95.8) 2.760 (70.0) 3.910 (99.2) AC OPERATED Coils Contacts NTE Type No. Input Voltage Nom. Sealed Contact Arr. Max. Contact Cur. @ 600VAC Diag No. RLY560−3−480 480 VAC 13 VA 3PST−NO 60A D93 3.300 (83.7) Motor Rating in Amps Resistive Locked Rotor Number of Poles Full Load @ 600VAC @ 240VAC @ 480VAC @ 600VAC 3 60A 75A 360A 300A 240A 2.276 (57.8) Motor Horsepower Ratings Motor Type @ 120VAC @ 240VAC @ 480VAC @ 600VAC 1 3P 5 HP 7.5 HP − − 3 3P − 25 HP 30 HP 30 HP 2.031 (51.6) 1.465 (37.2) 1.465 (37.2) ACCESSORIES NTE TYPE NO. DESCRIPTION Auxiliary Switch, 1 SPDT Snap Action Switch w/.250” QC Terminals RLY9190 Auxiliary Switch, 2 SPDT Snap Action Switches w/.250” QC Terminals RLY9191 Auxiliary Switch, 1 SPST−NO & 1 SPST−NC Switch w/.250” QC Terminals RLY9192 Auxiliary Switch, 1 SPST−NO & 1 SPST−NC Switch w/6−32 Screw Terminals RLY9193 3.154 (80.1) Electrical Specifications Initial Dielectric Strength Between Contact and Coil: 2200 VAC Between Poles: 2200 VAC Between Open Contacts: 2200 VAC Insulation System: 130 C Class B Power Pole Terminations: Aluminum Box Lug Wire Size: 14−2 Recommended Tightening Torque: 50 in. lbs. Quick Connects Coil Terminals: Dual: .250” QC or #6−32 Screw/.250” QC Power Terminals: Dual .250” QC Coil Nom Coil Restsance: 3.8 (24V); 125 (120V); 464 (240V) Max. Pick−up Voltage: 75% of nominal or less, DC Min Drop−out Voltage: 10% to 60% of operate voltage Nom Inrush (60Hz): 130 VA Max Coil Voltage: 30V (24V); 132V (120V); 264V (240V) Environmental Characteristics Operating: −40 C to +65 C Weight Std: 22.4 oz. (635 grams)—typical Note It is not recommended to mount or operate contactors upside−down. NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 99