Features • • • • • Hot molded carbon element One piece housing and bushing Stainless steel shaft Compact size Meets or exceeds specifications of MIL–R–94 — QPL Listed PEC SU/RV6NAY Series Potentiometer – 1/2 Watt, 1/8” dia. shaft P4 .469 (11.9) .036 (0.19) 1/4–32 NEF–2A .164 (4.2) .510 (13.0) Dia .065 (1.6) .016 (0.4) PEC No. NTE Part No. Military No. Value (Ohms) Shaft Length Diag No. SU1011S28 501–0085 RV6NAYSD101A 100 7/8” P4 SU2511S28 501–0086 RV6NAYSD251A 250 7/8” P4 SU5011S28 501–0087 RV6NAYSD501A 500 7/8” P4 SU1021S28 501–0088 RV6NAYSD102A 1K 7/8” P4 SU2521S28 501–0089 RV6NAYSD252A 2.5K 7/8” P4 SU5021S28 501–0090 RV6NAYSD502A 5K 7/8” P4 SU1031S28 501–0091 RV6NAYSD103A 10K 7/8” P4 SU2531S28 501–0092 RV6NAYSD253A 25K 7/8” P4 SU5031S28 501–0093 RV6NAYSD503A 50K 7/8” P4 SU1041S28 501–0094 RV6NAYSD104A 100K 7/8” P4 SU2541S28 501–0095 RV6NAYSD254A 250K 7/8” P4 SU5041S28 501–0096 RV6NAYSD504A 500K 7/8” P4 SU1051S28 501–0097 RV6NAYSD105A 1M 7/8” P4 .125 (3.2) Dia .250 (6.35) L .030 (.762) Typ .091 (2.3) Typ .211 (5.35) .066 (1.7) 45° 32° 32° Terminal End .240 (6.1) Shaft End L = Shaft Length (See Table) Specifications Electrical Resistance Range – Linear Taper: 100Ω to 1 Meg Ω Resistance Tolerance: ±10% Power Rating: 1/2 Watt @ 70°C derated to 0 Watts @ 120°C Insulation Resistance: 10K Meg Ω (Dry) 100K Meg Ω (Wet) Dielectric Strength: 750V RMS at sea level Operating Voltage: 350V subject to power rating Mechanical Mechanical Rotation: 295° Operating Torque: 0.5 oz/in to 6 oz/in Rotation Life: 25,000 cycles Environmental Operating Temperature: –65°C to +125°C Resistance to Soldering Heat: 350°C for 5 seconds Load Life: 1000 hr. at 70°C 8 NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com