Features 16mm Potentiometer Available in Linear and Audio Taper Switch Type Available in Both Audio and Linear Taper Solder Lug and Combination Type Terminals Perfect for Consumer Electronics Applications Potentiometer − 0.1 Watt and 0.2 Watt, 6mm dia. shaft, Single Turn P7 .362 (9.2) 1.181 (30.0) .665 (16.9) Dia .256 (6.5) .236 (6.0) .492 (12.5) M7*0.75 .150 (3.8) .197 (5.0) NTE Part No. Value (Ohms) Taper Switch Terminal Style Diag No. 502−0301 1K Linear No Combination P7 502−0302 1K Linear Yes Solder Lug P8 502−0303 1K Audio No Combination P7 502−0304 1K Audio Yes Solder Lug P8 502−0305 5K Linear No Combination P7 502−0306 5K Audio No Combination P7 502−0307 5K Audio Yes Solder Lug P8 502−0308 10K Linear No Combination P7 502−0309 10K Linear Yes Solder Lug P8 502−0310 10K Audio No Combination P7 P8 .453 (11.5) .157 (4.0) .665 (16.9) Dia 1.181 (30.0) .256 (6.5) .236 (6.0) .532 (13.5) .185 (4.7) M7*0.75 .197 (5.0) 502−0311 10K Audio Yes Solder Lug P8 502−0312 50K Linear No Combination P7 502−0313 50K Audio No Combination P7 502−0314 50K Audio Yes Solder Lug P8 502−0315 100K Linear No Combination P7 502−0316 100K Audio No Combination P7 Electrical 502−0317 100K Audio Yes Solder Lug P8 502−0318 500K Linear No Combination P7 502−0319 500K Linear Yes Solder Lug P8 502−0320 500K Audio No Combination P7 502−0321 500K Audio Yes Solder Lug P8 502−0322 1M Linear No Combination P7 502−0323 1M Audio No Combination P7 502−0324 1M Audio Yes Solder Lug P8 Resistance Range − Linear Taper: 1K to 1 Meg Resistance Range − Audio Taper: 1K to 1 Meg Resistance Tolerance: 20% Sliding Noise: less than 47mV 20 (R > 10K) Residual Resistance: 10 (R 10K) Insulation Resistance: more than 100 Meg at 500VDC Switch Contact Resistance: less than 50 Meg Operating Voltage: 150VAC Rated Power − Linear Taper: 0.2W Rated Power − Audio Taper: 0.1W Switch Rated Power: 125VAC at 1A Withstand Voltage: 1 minute at 500VAC Specifications Mechanical Total Rotation Angle: 300 5 Switch Angle: 35 10 Rotation Torque: 30gf.cm to 200gf.cm Switch Action: 50gf.cm to 350gf.cm Rotation Stopper Strength: 8Kgf.cm Max Shaft Push−Pull Strength: 7Kgf.‘ Max Rotation Life: 15,000 cycles Switch Life: 10,000 cycles Mounting Hole: .312” (7.9mm) dia. Environmental Operating Temperature: −10 C to +70 C Resistance to Soldering Heat: 260 C for 3 seconds NTE Electronics, Inc. Voice (800) 631−1250 (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 65