Features 24mm Potentiometer Available in Linear and Audio Taper Switch Type Available in Both Audio and Linear Taper Solder Lug and Combination Type Terminals Perfect for Consumer Electronics Applications Potentiometer − 1/2 Watt and 1/4 Watt, 6mm dia. shaft, Single Turn P9 .453 (11.5) .945 (24.0) Dia 1.181 (30.0) .256 (6.5) .236 (6.0) .740 (18.8) M9*0.75 .969 (24.6) NTE Part No. Value (Ohms) Taper Switch Terminal Style 502−0401 500 Linear No Combination P9 502−0402 1K Linear No Solder Lug P10 502−0403 1K Audio Yes Combination P11 502−0404 1K Audio No Combination P9 502−0405 5K Audio Yes Combination P11 502−0406 5K Linear No Solder Lug P10 502−0407 5K Audio No Combination P9 502−0408 10K Linear No Solder Lug P10 502−0409 10K Linear Yes Combination P11 502−0410 10K Audio No Combination P9 502−0411 10K Audio Yes Combination P11 502−0412 50K Linear No Solder Lug P10 502−0413 50K Audio No Combination P9 502−0414 50K Audio Yes Combination P11 502−0415 100K Linear No Solder Lug P10 502−0416 100K Audio No Combination P9 502−0417 100K Audio Yes Combination P11 502−0418 500K Linear No Solder Lug P10 502−0419 500K Linear Yes Combination P11 502−0420 500K Audio No Combination P9 502−0421 500K Audio Yes Combination P11 502−0422 1M Linear No Solder Lug P10 502−0423 1M Linear Yes Combination P11 502−0424 1M Audio No Combination P9 502−0425 1M Audio Yes Combination P11 P11 .787 (20.0) .197 (5.0) 1.181 (30.0) .945 (24.0) Dia .256 (6.5) P10 .449 (11.4) 1.181 (30.0) .256 (6.5) .953 (24.2) Dia .236 (6.0) .728 (18.5) M9*0.75 .787 (20.0) Specifications Electrical Resistance Range − Linear Taper: 500 to 1 Meg Resistance Range − Audio Taper: 1K to 1 Meg Resistance Tolerance: 20% Sliding Noise: less than 47mV 20 (R > 10K) Residual Resistance: 10 (R 10K) Insulation Resistance: more than 100 Meg at 500VDC Switch Contact Resistance: less than 0.3 Operating Voltage: 250VAC Rated Power − Linear Taper: 0.5W Rated Power − Audio Taper: 0.25W Switch Rated Power: 125VAC at 1A Withstand Voltage: 1 minute at 500VAC Mechanical .236 (6.0) M9*0.75 .787 (20.0) .787 (20.0) Diag No. .787 (20.0) Total Rotation Angle: 300 10 Switch Angle: 50 5 Rotation Torque: 30gf.cm to 200gf.cm Switch Action: 150gf.cm to4350gf.cm Rotation Stopper Strength: 5Kgf.cm Min Shaft Push−Pull Strength: 7Kgf. Min Rotation Life: 15,000 cycles Switch Life: 10,000 cycles Mounting Hole: .312” (7.9mm) dia, Environmental Operating Temperature: −10 C to +70 C Resistance to Soldering Heat: 260 C for 3 seconds 66 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com