OeM4207-26.00M TCVCXO Oscillator November 2010 • Pletronics’ OeM4 is from the OeXO™ Series of temperature compensated voltage controlled crystal oscillator with a CMOS output. • Tube packaging is available • Hermetically sealed Metal Package to replace DIP/DIL OCXOs • Supply Voltage range: 3.10 to 12.0V Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 4.00 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D.1 Second Level Interconnect code: e1 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +12.0V VCONTROL Voltage -0.5V to +3.0V or limited to ±5mA Vo -0.5V to +6.0V Output Voltage Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 120oC/Watt depending on the solder pads, ground plane and construction of the PCB. ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2010, Pletronics Inc. OeM4207-26.00M TCVCXO Oscillator November 2010 Part Marking: PLE OEM4 26.00 4207 YMD zz PLE OEM4207 26.00M YMDzz C = = Pletronics Model number of the series frequency in MHZ Model number Year, Month and Date of manufacture internal factory code = = = Codes for Date Code YMD Code 0 1 2 3 4 Code A B C D E F G H J K L M Year 2010 2011 2012 2013 2014 Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Code Day Code Day 1 1 H 17 2 2 J 18 3 3 K 19 4 4 L 20 5 5 M 21 6 6 N 22 7 7 P 23 8 8 R 24 9 9 T 25 A 10 U 26 B 11 V 27 C 12 W 28 D 13 X 29 E 14 Y 30 F 15 Z 31 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Font is Arial Bar code is 39-Full ASCII The bar code will show the actual Part Number OEM4207-26.00M www.pletronics.com 425-776-1880 2 G 16 OeM4207-26.00M TCVCXO Oscillator November 2010 Electrical Specification over the specified temperature range. Item Min TYP Max Unit Condition Frequency Stability over temperature -50 - 50 ppb Over 0oC to 70oC Holdover -50 -40 0 0 50 40 ppb ppb Over 0oC to 70oC for 24 hours Over + _5oC change for 24 hours Frequency Calibration -2.0 - 2.0 ppm Frequency offset at 25oC, 60 minutes after reflow. Supply voltage stability -10 0 10 ppb + _ 2% variation in supply voltage Load sensitivity -5 - 5 ppb 10K ohm + _10% || 15 pF + _10% Warm Up - 0.4 3.0 S Aging rate following reflow - ±10 ±3 ±1 - ppb/day -1000 -1500 -4600 - 1000 1500 4600 ppb Long term stability (Aging) Output Waveform at fixed supply voltage + load (reference to midpoint min/max frequency) Time to reach specified frequency 1 day after reflow 7 days after reflow 30 days after reflow after 1 year after 5 years after 15 years CMOS Output VHIGH 2.80 - - V Load: 10K ohm + _10% || 15 pF + _10% Output VLOW - - 0.20 V TRISE and TFALL - - 4.0 nS Vth: TR and TF 10% and 90% of amplitude Vth: D.C. 50% of amplitude 40 50 60 % - -71 -92 -115 -135 -148 -149 - - - 0.6 pS Duty Cycle Phase Noise 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz Jitter at 25oC dBc/Hz V Supply Range 1 VCC 3.10 - 12.0 Volts Supply Current ICC - - 6.0 mA VCONTROL Range 0.5 - 2.50 Volts VCONTROL Input Current -50 - 50 uA Frequency Pullability 5 - 10 ±ppm Linearity - 0.05 2.0 % +70 o Operating Temperature 0 - Frequency offset from carrier 12kHz to 20MHz 1.50 volts nominal Slope positive In accordance with MIL-PRF-55310 C o Storage Temperature -55 +95 C Note: 1 For correct operation a 10nF supply de-coupling capacitor should be placed next to the device. www.pletronics.com 425-776-1880 3 OeM4207-26.00M TCVCXO Oscillator November 2010 Mechanical: Inches PLE Cover: Kovar Electroless Nickel Plated 1 µinch (25 µm) typical Resistance welded to base Base: Kovar Glass to metal sealed leads A 0.787 + _0.005 20.00 + _0.13 B 0.487 + _0.005 12.37 + _0.13 C 0.225 + _0.011 5.72 + _0.28 D1 0.250 6.35 E1 0.020 0.51 F1 0.031 0.79 G1 0.094 2.37 1 H 0.300 7.62 I1 0.600 15.24 J1 0.094 2.37 Pin 7 Connected to case Label: Laser marked mm 1 Nominal dimension Not to scale Pin Name 1 VCONTROL 7 Ground (case) 8 Output 14 VCC Function EFC, electronics frequency control. 1.5V is nominal input CMOS output Power supply. Be sure to bypass near the pin with 10nF low noise capacitor. Layout and application information For Optimum Stability and Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. • minimize air flow across the device PCB Mounting (typical for lead free processing) Hand soldering is recommended. Wave solder at 255oC to 280oC with maximum wave exposure of 15 seconds Reflow solder maximum exposure of 245oC for 15 seconds Soldering done in a nitrogen atmosphere enhances the solder joint quality. www.pletronics.com 425-776-1880 4 OeM4207-26.00M TCVCXO Oscillator November 2010 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2010, Pletronics Inc. www.pletronics.com 425-776-1880 5