PLETRONICS Voltage Controlled Crystal Oscillators RoHS 6/6 Compliant VHD6 Series VHA6 Series LCC Ceramic Package 3.2 x 5.0 x 1.35 mm Fundamental Mode Crystal Enable/Disable function on pad 2 Small SMD package for high density board designs LCC Ceramic Package 5.0 x 7.0 x 1.9 mm Fundamental Mode Crystal Enable/Disable function on pad 2 VLU7 LVDS Output Series VPU7 PECL Output Series LCC Ceramic Package 5.0 x 7.0 x 2.97 mm Supply Voltage 3.3 Volt Only Output frequency is synthesized from fundamental quartz crystal Enable/Disable function on pad 2 +/- 50PPM APR LCC Ceramic Package 5.0 x 7.0 x 2.97mm Supply Voltage 3.3 Volt Only Output frequency is synthesized from fundamental quartz crystal Enable/Disable function on pad 2 +/- 50PPM APR FEATURES APPLICATIONS Excellent phase noise characteristics All have Tri-State with Power Standby modes Temp range: - 10° to +70°C Standard, -40° to +85°C Extended Available Tolerances: +/- 20PPM, +/- 25PPM, and +/- 50PPM Most common frequencies in stock Pletronics Part Series Package Size Frequency Range (MHz) Tr/Tf Maximum (nS) Duty Cycle % Ideal reference clocks for high-speed applications requiring low jitter, including: 1/10 Gigabit Ethernet 2/4/10G Fibre Channel Server & Storage platforms SONET/SDH line cards. Typical RMS Jitter (pS) 12KHz20MHz Current with Load (ma) 10Hz-20MHz VHD6 3.2x5 mm 10-106 6.0 45-55 0.6 8.0 VHA6 5.x7 mm 1.7-108 6.0 45-55 06 8.0 VLU7 5x7 mm 10.9-670 0.3 47-53 0.6 3.2 90 VPU7 5x7 mm 10.9-766 876-1,170 0.3 47-53 0.8 3.2 110 Pletronics, Inc. (425)-776-1880, Fax: (425) 776-2760, www.pletronics.com SGC001 (REV-F) Supply Voltage 2.5V 3.3V