5x5x1.3mmTops Power Pure Green &Red & Blue LED OSTCXBSGC1E VER.C.1 ■Features ■Outline ● Highest Luminous Flux ● Super Energy Efficiency ● Long Lifetime Operation ● ● 4.8 5 Superior UV Resistance 2 3 0.8 1 Water Clear Type 4 ■Applications 5 ● Mobile Phone Flash ● Automotive Interior/Exterior Lighting / Signal Lighting ● Architectural Lighting ● LCD TV / Monitor Backlight ● Projector Light Source / Traffic Signals / Task Lighting ● Decorative / Pathway Lighting / Household Applications Back View 3 5 .2 0 Item Symbol DC Forward Current ℃ (Ta=25 ) Value Green/Blue Red Unit 200 200 mA Pulse Forward Current* IFP 250 250 mA Reverse Voltage VR 5 5 V Power Dissipation PD 600 800 mW Topr -30 ~ +85 Storage Temperature Tstg -40 ~ +100 Lead Soldering Temperature Tsol 260 ℃ ℃ ℃/5sec - *Pulse width Max.10ms Duty ratio max 1/10 ■Electrical ℃ (Ta=25 ) -Optical Characteristics Item DC Forward Voltage DC Reverse Current Domi. Wavelength Luminous Flux 50% Power Angle Symbol Condition Min. Typ. Max. Unit V F (R ) IF=150mA 2.0 2.5 3.0 V VF (B/G) IF=150mA 3.0 3.3 4.0 V IR VR=5V - - 10 µA λD(Red) IF=150mA 619 624 629 nm λD(Green) IF=150mA 520 525 535 nm λD(Blue) Φv (Red) Φv (Green) Φv (Blue) IF=150mA 460 465 475 nm IF=150mA 15 20 - lm IF=150mA 20 30 - lm IF=150mA 5 10 - lm 2θ1/2 IF=150mA - 120 - deg Note: Don’t drive at rated current more than 5s without heat sink for Tops H Power emitter series. LED & Application Technologies 5 1 . 2 4.3 Red Anode 6 4 . 6 1.1 1 Solder Mask 3 . 1 Solder Pad 1,2,3.Cathode 4,5,6.Anode Recommended Solder Pad Design Unite:mm Tolerance:±0.20mm ■Directivity IF Operating Temperature 2 B R G .3 1 4 Maximum Rating .8 1 4.4 6 1.85 1.85 4.5 Solder Pad 0.75 Heat-sink .6 0 .2 5 5 ■Absolute Dimension 0 0