MDS-00000368

Product: XRT91L34IV‐F Package: 128L LQFP‐TEP (14x14)
Material Declaration
Statement of Materials, Construction
Material
Component
Material Weight %
Name
Weight (mg)
Element/Compound
CAS No.
1
Die
8.9260
Silicon
7440‐21‐3
8.9260
1.35
100.00
2
Die Attach
1.4546
Silver
7440‐22‐4
1.3237
0.20
91.00
Synthetic Resin
‐
0.0436
0.01
3.00
Epoxy Resin A
‐
0.0436
0.01
3.00
Epoxy Resin B
‐
0.0436
0.01
3.00
3
4
5
6
7
8
Heat Spreader
125.2313
Die Attach
Mold Compound
Lead Frame
3.9670
423.0360
93.9565
Plating
3.6370
Wire Total Unit Weight:
0.9920
Weight (mg)
/Total Unit
/ Component
AL
7429‐90‐2
116.2397
17.58
92.82
Al2O3
1344‐28‐1
8.9916
1.36
7.18
Silver
7440‐22‐4
3.6100
0.55
2.88
Synthetic Resin
‐
0.1190
0.02
0.10
Epoxy Resin A
‐
0.1190
0.02
0.10
Epoxy Resin B
‐
0.1190
0.02
0.10
Silica Fused
60676‐86‐0
368.8870
55.79
87.20
Epoxy Resin
‐
31.7280
4.80
7.50
Phenol Resin
‐
21.1520
3.20
5.00
Carbon Black
1333‐86‐4
1.2690
0.19
0.30
Cu
7440‐50‐8
88.8716
13.44
94.59
Fe
7439‐89‐6
0.0940
0.01
0.10
Si
7440‐21‐3
0.6812
0.10
0.73
Mn
7439‐96‐5
0.0470
0.01
0.05
Ni
7440‐02‐0
3.0066
0.45
3.20
Zn
7440‐66‐6
0.4698
0.07
0.50
Mg
7439‐95‐4
0.1644
0.02
0.18
Ag
7440‐22‐4
0.4851
0.07
0.52
C
7440‐44‐0
0.0023
0.00
0.00
N
7727‐37‐9
0.0023
0.00
0.00
O
7782‐44‐7
0.0023
0.00
0.00
*Polyimide
‐
0.0879
0.01
0.09
*NBR
9003‐18‐3
0.0147
0.00
0.02
*Bismaleimide
79922‐55‐7
0.0147
0.00
0.02
*Phenol Resin
28453‐20‐5
0.0126
0.00
0.01
Tin
7440‐31‐5
3.6350
0.55
99.95
Impurity
‐
0.0020
0.00
0.05
Gold
7440‐57‐5
0.9920
0.15
100.00
Impurity
‐
0.0000
0.00
0.00
661.2004
Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors.
RoHS Certificate of Compliance
This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT. ⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant
⊠ China RoHS | Fully Compliant
⊠ RoHS‐6 | Fully Compliant
⊠ Non Use of PFOS & PFOA
⊠ REACH | Fully Compliant
EU RoHS Restricted Substance
Allowable Limit (at homogenous material level)
Cadmium & its compounds (Cd)
Hexavalent Chromium & its compounds (Cr(VI))
100 ppm (0.01 weight %)
1000 ppm (0.10 weight %)
Mercury & its compounds (HG)
1000 ppm (0.10 weight %)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Lead & its compounds (Pb)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
Exar Corporation
48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000
www.exar.com
Reference No: MDS‐00000368 Rev 000
Material Declaration
Statement of Materials, Construction
Product: XRT91L34IV‐F Package: 128L LQFP‐TEP (14x14)
⊠ Halogen‐free | Green
⊠ Dodd‐Frank Wall Street Reform and Consumer Protection Act, July 21, 2010 We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware of any conflict metals to be used in any of their products.
⊠ Flammability rating of UL 94‐V0 ⊠ MSL Pb‐Free: L4 @ 250°C
Chiew Mee Foo, QA Manager
Exar Corporation
48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000
www.exar.com
Reference No: MDS‐00000368 Rev 000