Product: XR17V352IB113-F Package: 113L FPBGA (9x9) Material Declaration Statement of Materials, Construction Component Material Material Weight % Name Weight (mg) Element/Compound CAS No. 1 Die 5.2006 Silicon 7440-21-3 5.2006 2.39 100.00 2 Die Attach 0.3264 Silver 7440-22-4 0.2497 0.11 76.50 Epoxy Resin - A 9003-36-5 0.0359 0.02 11.00 Epoxy Resin - B 5026-74-4 0.0196 0.01 6.00 t-Butyphenyl Glycidyl Ether 3101-60-8 0.0163 0.01 5.00 3 Substrate 5 6 Solder Balls Wire Total Unit Weight: / Component Phenolic Hardener 92-886 0.0033 0.00 1.00 38668-46-1 0.0016 0.00 0.50 Plating Cu 7440-50-8 36.7104 16.87 52.72 Plating Au 7440-57-5 0.1847 0.08 0.27 Plating Ni 7786-81-4 1.4212 0.65 2.04 Copper Foil 7440-50-8 7.1571 3.29 10.28 Bismaleimide Triazine resin, Epoxy resin - 1.9289 0.89 2.77 69.6320 Inorganic Filler - 1.1574 0.53 1.66 Continuous Filament Fiber Glass 65997-17-3 1.9289 0.89 2.77 Copper 2.7005 1.24 3.88 4.9381 2.27 7.09 Inorganic Filler 7440-50-8 105391-33-1, 25722-66-1, 9003-36-5,NA - 2.4690 1.13 3.55 Continuous Filament Fiber Glass 65997-17-3 4.9381 2.27 7.09 Talc containing no asbestiform fibers 14807-96-6 0.1639 0.08 0.24 Morpholine derivative - 0.1639 0.08 0.24 Barium Sulfate 7727-43-7 1.8439 0.85 2.65 Silica, amorphous 7631-86-9 0.0410 0.02 0.06 Dipropylene glycol monomethyl ether Mold Compound /Total Unit Amine Type Hardener Bismaleimide Triazine resin, Epoxy resin, other resin 4 Weight (mg) 34590-94-8 0.9834 0.45 1.41 Epoxy resin (MW ≦700) - 0.5327 0.24 0.77 Epoxy resin (MW ≦700, Carc. Cat. 3 ; R40, R43) 85954-11-6 0.3688 0.17 0.53 91.1310 50.1570 1.1530 Silica Fused 60676-86-0 81.7445 37.57 89.70 Epoxy Resin - 5.0122 2.30 5.50 Phenol Resin - 4.1009 1.88 4.50 Carbon Black 1333-86-4 0.2734 0.13 0.30 Sn 7440-31-5 48.4015 22.24 96.50 3.00 Silver 7440-22-4 1.5047 0.69 Copper 7440-50-8 0.2508 0.12 0.50 Gold 7440-57-5 1.1529 0.53 99.99 Impurity 7440-70-2 0.0001 0.00 0.01 217.6000 Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors. Exar Corporation 48720 Kato Road, Fremont, CA 94538 Phone: 510-668-7000 www.exar.com Reference No: MDS-00000370 Rev 000 Product: XR17V352IB113-F Package: 113L FPBGA (9x9) Material Declaration Statement of Materials, Construction RoHS Certificate of Compliance This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT. ⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant ⊠ China RoHS | Fully Compliant ⊠ RoHS-6 | Fully Compliant ⊠ Non Use of PFOS & PFOA ⊠ REACH | Fully Compliant EU RoHS Restricted Substance Allowable Limit (at homogenous material level) Cadmium & its compounds (Cd) Hexavalent Chromium & its compounds (Cr(VI)) 100 ppm (0.01 weight %) 1000 ppm (0.10 weight %) Mercury & its compounds (HG) 1000 ppm (0.10 weight %) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Lead & its compounds (Pb) 1000 ppm (0.10 weight %) 1000 ppm (0.10 weight %) 1000 ppm (0.10 weight %) ⊠ Halogen-free | Green ⊠ Dodd-Frank Wall Street Reform and Consumer Protection Act, July 21, 2010 We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware of any conflict metals to be used in any of their products. ⊠ Flammability rating of UL 94-V0 ⊠ MSL Pb-Free: L4 @ 245°C Chiew Mee Foo, QA Manager Exar Corporation 48720 Kato Road, Fremont, CA 94538 Phone: 510-668-7000 www.exar.com Reference No: MDS-00000370 Rev 000