NJG1690MD7 HIGH ISOLATION X-SPDT (DP4T) SWITCH

NJG1690MD7
HIGH ISOLATION X-SPDT (DP4T) SWITCH GaAs MMIC
I GENERAL DESCRIPTION
The NJG1690MD7 is a GaAs X (cross)-SPDT(DP4T) switch MMIC
for switching of balanced (differential) dual band filters. It features low
insertion loss and very high isolation for balanced signal input which
makes it much suited for balanced filter switching.
The ESD protection circuit are integrated in the IC to achieve high
ESD tolerance.
The ultra-small and ultra-thin EQFN14-D7 package is adopted.
I PACKAGE OUTLINE
NJG1690MD7
*) X-SPDT is a paired SPDT switch controlled synchronously. The X-SPDT
includes two SPDT switches whose RF lines have a crossing inside the chip.
I APPLICATIONS
Balanced filter switching application
TDD/FDD LTE, UMTS, CDMA and GSM Multi-mode or Multi-band applications
Mobile phone, Tablet PC, Data card, Router and others mobile device applications
I FEATURES
G Low operation voltage
G Low control voltage
G High isolation
VDD =2.7V
VCTL(H) =1.8V typ.
37dB typ.
@f=2.7GHz, PIN=0dBm (with balanced mode operation)
29dB typ.
@f=1.0GHz, PIN=0dBm
24dB typ.
@f=2.0GHz, PIN=0dBm
21dB typ.
@f=2.7GHz, PIN=0dBm
G Low insertion loss
0.3dB typ. @f=1.0GHz, PIN=0dBm
0.4dB typ. @f=2.0GHz, PIN=0dBm
0.45dB typ. @f=2.7GHz, PIN=0dBm
G Small and thin package
EQFN14-D7 (Package size: 1.6x1.6x0.397mm typ.)
G RoHS compliant and Halogen Free
G MSL: 1
I PIN CONFIGURATION
(Top View)
11
10
9
8
12
7
13
6
14
5
1
2
3
4
Pin connection
1. GND
2. PA2
3. PB1
4. GND
5. PB2
6. GND
7. VDD
8. GND
9. PC2
10. PC1
11. GND
12. VCTL
13. GND
14. PA1
I TRUTH TABLE
“H”=VCTL(H), “L”=VCTL(L)
ON PATH
VCTL
PC1-PA1, PC2-PA2
H
PC1-PB1, PC2-PB2
L
NOTE: Please note that any information on this catalog will be subject to change.
Ver.2013-07-19
-1-
NJG1690MD7
I ABSOLUTE MAXIMUM RATINGS
(Ta=+25°C, Zs=Zl=50Ω)
PARAMETER
CONDITIONS
SYMBOL
RATINGS
UNITS
28
dBm
RF input power
PIN
VDD =2.7V, VCTL=0V/1.8V
Supply voltage
VDD
5.0
V
Control voltage
VCTL
5.0
V
1300
mW
Four-layer FR4 PCB with through-hole
(74.2x74.2mm), Tj=150°C
Power dissipation
PD
Operating temp.
Topr
-40~+85
°C
Storage temp.
Tstg
-55~+150
°C
I ELECTRICAL CHARACTERISTICS
(General conditions: Ta=+25°C, Zs=Zl=50Ω, VDD=2.7V, VCTL(L)=0V, VCTL(H)=1.8V, with application circuit1)
PARAMETERS
SYMBOL
Supply voltage
VDD
Operating current
IDD
CONDITIONS
PIN=0dBm
MIN
TYP
MAX
UNITS
1.5
2.7
4.5
V
-
16
30
µA
Control voltage (LOW)
VCTL(L)
0
-
0.4
V
Control voltage (HIGH)
VCTL(H)
1.3
1.8
4.5
V
Control current
ICTL
f=2GHz, PIN=0dBm
-
5
10
µA
Insertion loss 1
LOSS1
f=1GHz, PIN=0dBm
-
0.30
0.45
dB
Insertion loss 2
LOSS2
f=2GHz, PIN=0dBm
-
0.40
0.55
dB
Insertion loss 3
LOSS3
f=2.7GHz, PIN=0dBm
-
0.45
0.65
dB
33
37
-
dB
27
29
-
dB
21
24
-
dB
18
21
-
dB
22
25
-
dB
Balanced mode isolation
*Note1
B-ISL
Isolation 1
ISL1
Isolation 2
ISL2
Isolation 3
ISL3
Isolation 4
ISL4
PC-PA (PC-PB ON)
PC-PB (PC-PA ON)
f=2.7GHz, PIN=0dBm
PC1-PA1, PC2-PA2
PC1-PB1, PC2-PB2
f=1GHz, PIN=0dBm
PC1-PA1, PC2-PA2
PC1-PB1, PC2-PB2
f=2GHz, PIN=0dBm
PC1-PA1, PC2-PA2
PC1-PB1, PC2-PB2
f=2.7GHz, PIN=0dBm
PC1-PC2 port
f=2GHz, PIN=0dBm
Note1:
The balanced mode isolation is a unique specification for isolation defined under the condition where
the X-SPDT switch is used in balanced mode operation as shown in application circuit2.
The NJG1690MD7 is designed so that the isolation in the balanced mode operation is much higher than
the isolation in the single-ended mode operation.
-2-
NJG1690MD7
I ELECTRICAL CHARACTERISTICS
(General conditions: Ta=+25°C, Zs=Zl=50Ω, VDD=2.7V, VCTL(L)=0V, VCTL(H)=1.8V, with application circuit1)
PARAMETERS
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
20
24
-
dBm
Input power at 0.2dB
compression point
P-0.2dB
f=2GHz
VSWR
VSWR
f=2GHz, On port
-
1.2
1.4
50% CTL to 10%/90% RF
-
1.5
5.0
Switching time
TSW
µs
-3-
NJG1690MD7
I TERMINAL INFORMATION
No.
SYMBOL
DESCRIPTION
1
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
2
PA2
This port is connected to PC2 terminal by applying High-level (1.3~4.5V) at VCTL
terminal. An external capacitor is required to block DC voltage of internal circuit.
3
PB1
This port is connected to PC1 terminal by applying Low-level (0~0.4V) at VCTL
terminal. An external capacitor is required to block DC voltage of internal circuit.
4
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
5
PB2
This port is connected to PC2 terminal by applying Low-level (0~0.4V) at VCTL
terminal. An external capacitor is required to block DC voltage of internal circuit.
6
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
7
VDD
A supply voltage terminal (1.5~4.5V). Please place a bypass capacitor
between this terminal and GND for avoiding RF noise from outside.
8
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
9
PC2
Common RF port. This port is connected with either of PA2 or PB2. An external
capacitor is required to block DC voltage of internal circuit.
10
PC1
Common RF port. This port is connected with either of PA1 or PB1. An external
capacitor is required to block DC voltage of internal circuit.
11
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
12
VCTL
Control signal input terminal. This terminal is set to high-level (1.3V~4.5V) or
low-level (0~0.4V).
13
GND
Ground terminal. Please connect this terminal with ground plane as close as
possible for good RF performance.
14
PA1
This port is connected to PC1 terminal by applying High-level (1.3~4.5V) at VCTL
terminal. An external capacitor is required to block DC voltage of internal circuit.
-4-
NJG1690MD7
I ELECTRICAL CHARACTERISTICS (With Application circuit1, Loss of external circuit are excluded)
Insertion Loss vs. Frequency
( V =2.7V, V
DD
0.0
Insertion Loss vs. Frequency
=1.8V )
( V =2.7V, V
CTL
DD
0.0
=0V )
CTL
PC1-PB1
PC2-PB2
Insertion Loss (dB)
Insertion Loss (dB)
PC1-PA1
PC2-PA2
-0.5
-1.0
-1.5
0.5
1.0
1.5
2.0
2.5
-0.5
-1.0
-1.5
0.5
3.0
1.0
Frequency (GHz)
VSWR vs. Frequency
VSWR
VSWR
1.4
1.2
1.6
1.4
1.2
1.0
1.5
2.0
2.5
1.0
0.5
3.0
1.0
Frequency (GHz)
( V =2.7V, V
DD
0
CTL
1.5
2.0
( V =2.7V, V
DD
0
CTL
=0V )
PC1-PA1
PC1-PB1
PC2-PB2
PC2-PA2
-10
PC1-PC2
Isolation (dB)
Isolation (dB)
3.0
Isolation vs. Frequency
=1.8V )
-10
2.5
Frequency (GHz)
Isolation vs. Frequency
-20
-30
PC1-PC2
-20
-30
-40
-40
-50
0.5
3.0
PC1 Port
PC2 Port
PB1 Port
PB2 Port
1.8
1.6
1.0
0.5
2.5
( VDD=2.7V, VCTL=0V )
2.0
PC1 Port
PC2 Port
PA1 Port
PA2 Port
1.8
2.0
VSWR vs. Frequency
( VDD=2.7V, VCTL=1.8V )
2.0
1.5
Frequency (GHz)
1.0
1.5
2.0
Frequency (GHz)
2.5
3.0
-50
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
-5-
NJG1690MD7
I ELECTRICAL CHARACTERISTICS
(With Application circuit1 and 2, Loss of external circuit are excluded)
Insertion Loss vs. Input Power
( f=2GHz, , V =2.7V, VCTL=1.8V )
DD
-0.5
-1.0
PC1-PA1
PC2-PA2
-1.5
( f=2GHz, PC1-PA1 ON, VCTL=1.8V )
0.0
Insertion Loss (dB)
0.0
Insertion Loss (dB)
Insertion Loss vs. Input Power
PC1-PB1
-0.5
-1.0
V =1.5V
DD
V =2V
DD
V =2.7V
-1.5
DD
V =3.5V
DD
PC2-PB2
V =4.5V
DD
-2.0
10
15
20
25
-2.0
30
10
15
Input Power (dBm)
20
25
Balanced Mode Isolation vs. Frequency
Balanced Mode Isolation vs. Frequency
( With Application Circuit 2 )
( Broad band )
-25
0
PC-PA
PC-PB
-30
-20
Isolation (dB)
Isolation (dB)
-10
-30
-40
-50
-60
-70
0.0
30
Input Power (dBm)
0.5
1.0
1.5
APPLICATION CIRCUIT 1
*1
APPLICATION CIRCUIT 2
*2
2.0
2.5
Frequency (GHz)
3.0
3.5
-35
-40
4.0
-45
2.4
2.45
2.5
2.55
2.6
2.65
2.7
2.75
2.8
Frequency (GHz)
*1) The balanced mode isolation measured with the application circuit1.
*2) The balanced mode isolation measured with the application circuit2 having single-ended interfaces
and baluns.
-6-
NJG1690MD7
I ELECTRICAL CHARACTERISTICS (With Application circuit1, Loss of external circuit are excluded)
Insertion Loss vs. Ambient Temperature
( PC1-PA1 ON, V =2.7V, V
DD
CTL
Insertion Loss vs. Ambient Temperature
=1.8V )
( f=2GHz, V =2.7V )
DD
0.0
f=1GHz
f=2GHz
f=2.7GHz
-0.2
Insertion Loss (dB)
Insertion Loss (dB)
0.0
-0.4
-0.6
-0.8
-1.0
PC1-PA1
PC2-PA2
PC1-PB1
PC2-PB2
-0.2
-0.4
-0.6
-0.8
-1.0
-50
0
50
100
-50
o
50
100
o
Ambient Temperature ( C )
VSWR vs. Ambient Temperature
Isolation vs. Ambient Temperature
( f=2GHz, V =2.7V, V
DD
CTL
=1.8V )
( f=2GHz, V =2.7V, V
DD
2
CTL
=1.8V )
-10
PC1 port
PA1 port
PC2 port
PA2 port
PC1-PB1
PC2-PB2
PC1-PC2
-15
Isolation (dB)
1.8
VSWR
0
Ambient Temperature ( C )
1.6
1.4
-20
-25
1.2
1
-30
-50
0
50
100
o
Ambient Temperature ( C )
-50
0
50
100
o
Ambient Temperature ( C )
-7-
NJG1690MD7
I ELECTRICAL CHARACTERISTICS (With Application circuit1, Loss of external circuit are excluded)
P
Balanced Mode Isolation vs. Temperature
( f=2.7GHz, V =2.7V )
-0.2dB
vs. Ambient Temperature
( f=2GHz, PC1-PA1 ON, V
DD
CTL
-20
=1.8V )
28
PC-PA
26
PC-PB
24
(dBm)
Isolation (dB)
-25
22
20
P
-0.2dB
-30
18
-35
V =1.5V
V =2.7V
V =2V
V =3.5V
DD
DD
DD
DD
16
-40
-50
0
50
14
100
-50
o
0
100
Ambient Temperature ( C )
Current I
Switching Time vs. Ambient Temperature
DD
( f=2GHz, PC1-PA1 ON )
(V
vs. Temperature
CTL
10
=1.8V )
40
V =1.5V
V =1.5V
V =2.7V
8
DD
35
DD
V =2V
DD
DD
V =3.5V
(µ
µ A)
DD
V =4.5V
DD
V =2.7V
30
DD
V =3.5V
DD
25
V =4.5V
DD
DD
6
Current I
Switching Time (µ
µ s)
50
o
Ambient Temperature ( C )
4
2
20
15
10
5
0
-50
0
50
100
o
Ambient Temperature ( C )
-8-
0
-50
0
50
100
o
Ambient Temperature ( C )
NJG1690MD7
I APPLICATION CIRCUIT 1 (Unbalanced mode)
50Ω
Ω
50Ω
Ω
PC1
11
VCTL
PC2
10
9
8
12
7
VDD
0/1.8V
2.7V
PA1
13
6
14
5
PB2
50Ω
Ω
50Ω
Ω
1
2
3
PA2
50Ω
Ω
4
PB1
50Ω
Ω
I PCB LAYOUT 1
(TOP VIEW)
PC1
PC2
C5
PCB:
Capacitor Size:
Strip Line Width:
PCB Size:
C4
C7
VCTL
C6
VDD
FR-4, t=0.2mm
1005
0.4mm
26 x 26mm
Losses of PCB, capacitors and connectors
C3
C1
C2
PA1
PB2
PA2
Frequency (GHz)
Loss (dB)
1
0.35
2
0.54
2.7
0.68
PB1
I PARTS LIST 1
PART ID
Value
COMMENT
C1~C6
56pF
MURATA (GRM15)
C7
1000pF
MURATA (GRM15)
-9-
NJG1690MD7
I APPLICATION CIRCUIT 2
(BALANCED MODE)
50Ω
Ω
PC
Balun
100Ω
PC1
11
VCTL
PC2
10
9
8
12
7
VDD
0/1.8V
2.7V
PA1
13
6
14
5
1
50Ω
Ω
2
3
PA2
PA
Balun
PB2
4
PB1
PB
100Ω
Balun
100Ω
50Ω
Ω
I PCB LAYOUT 2
(TOP VIEW)
GND
PB
C1
C2
B2 C3
PA
B1
PCB:
Capacitor Size:
Strip Line Width:
PCB Size:
FR-4, t=0.2mm
0603, 1005
0.4mm
19.4 x 14mm
C6
C7
VDD
C5
C4
B3
Losses of PCB, capacitors,
connectors and baluns
VCTL
Frequency (GHz)
Loss (dB)
2.7
0.93
PC
I PARTS LIST 2
- 10 -
PART ID
Value
C1~C6
56pF
C7
B1~B3
1000pF
2500MHz band
COMMENT
MURATA (GRM03)
MURATA (GRM15)
TDK-EPC (HHM1903A1)
NJG1690MD7
I PCB LAYOUT FOR EQFN14-D7
11
10
9
8
12
PCB
7
PKG
13
6
14
5
1
2
3
PKG Outline
GND Via Hole
Diameter: φ= 0.2mm
4
I PRECAUTIONS
[1] For good RF performance, all GND terminals must be connected to PCB ground plane of substrate, and
via-holes for GND should be placed near the IC.
[2] For good RF performance, through-holes for GND should be placed close to the GND pin 6 and pin 13. One
of the ways to do this is to place a via-hole at the TAB pad under this IC.
■ RECOMMENDED FOOTPRINT PATTERN (EQFN14-D7 PACKAGE Reference)
:Land
:Mask (Open area) *Metal mask thickness : 100µm
PKG:
1.6mm x 1.6mm
Pin pitch: 0.4mm
:Resist(Open area)
Detail A
- 11 -
NJG1690MD7
■ PACKAGE OUTLINE (EQFN14-D7)
Units
Board
Terminal treat
Molding material
Weight
Cautions on using this product
This product contains Gallium-Arsenide (GaAs) which is a harmful material.
• Do NOT eat or put into mouth.
• Do NOT dispose in fire or break up this product.
• Do NOT chemically make gas or powder with this product.
• To waste this product, please obey the relating law of your country.
This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle
with care to avoid these damages.
- 12 -
: mm
: Cu
: SnBi
: Epoxy resin
: 3.4mg
[CAUTION]
The specifications on this databook are only
given for information, without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.