PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip FEATURES: DESCRIPTION: . Operating frequency up to 500MHz with 2pf load . Operating frequency up to 400MHz with 5pf load . Operating frequency up to 230MHz with 15pf load . Operating frequency up to 85MHz with 50pf load . Very low output pin to pin skew < 250ps . Very low pulse skew < 200ps . VCC = 1.2V to 3.6V . Propagation delay < 2.3ns max with 15pf load . Low input capacitance: 3pf typical . 1:7 fanout . Available in 16pin 150mil wide QSOP package . Available in 16pin 173mil wide TSSOP package Potato Semiconductor’s PO49FCT32803G is designed for world top performance using submicron CMOS technology to achieve 500MHz output frequency with less than 250ps output skew. PO49FCT32803G is a 3.3V CMOS 1 input to 7 Output Buffered Driver with integrated series damping resistors on all outputs to match 50 ohm transmission line impedance. Typical applications are clock and signal distribution. Pin Configuration Logic Block Diagram Pin Description Pin Name INA O1 to O7 Potato Semiconductor Corporation Description Input Outputs 1 01/01/10 PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip Maximum Ratings Description Max Unit Storage Temperature -65 to 150 °C Operation Temperature -40 to 85 °C Operation Voltage -0.5 to +4.6 V Input Voltage -0.5 to Vcc+0.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description VOH Output High voltage VOL Test Conditions Min Typ Max Unit Vcc=3V Vin=VIH or VIL, IOH= -8mA 2.4 3 - V Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA - 0.4 0.5 V VIH Input High voltage Guaranteed Logic HIGH Level (Input Pin) 2 - Vcc V VIL Input Low voltage Guaranteed Logic LOW Level (Input Pin) -0.5 - 0.8 V IIH Input High current Vcc = 3.6V and Vin = 3.6V - - 1 uA IIL Input Low current Vcc = 3.6V and Vin = 0V - - -1 uA VIK Clamp diode voltage Vcc = Min. And IIN = -18mA - -0.7 -1.2 V Rs Series Resistor 22 Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25 ° C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current Potato Semiconductor Corporation 2 01/01/10 PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip Power Supply Characteristics Symbol IccQ Description Quiescent Power Supply Current Test Conditions (1) Min Typ Max Unit Vcc=Max, Vin=Vcc or GND - 0.1 30 uA Notes: 1. 2. 3. 4. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25°C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters (1) Description Test Conditions Typ Max Unit Cin Input Capacitance Vin = 0V 3 4 pF Cout Output Capacitance Vout = 0V - 6 pF Notes: 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description Test Conditions (1) M ax Unit tPLH Propagation Delay A to Bn CL = 15pF 2.3 ns tPHL Propagation Delay A to Bn CL = 15pF 2.3 ns tr/tf Rise/Fall Time 0.8V – 2.0V 1 ns tsk(p) Pulse Skew (Same Package) CL = 15pF 0.2 ns tsk(o) Output Pin to Pin Skew (Same Package) CL = 15pF 0.25 ns Output Skew (Different Package) CL = 1 5 p F 0.4 ns fmax Input Frequency CL = 50pF 85 MHz fmax Input Frequency CL = 15pF 230 MHz fmax Input Frequency CL = 5pF 400 MHz fmax Input Frequency CL = 2pF 500 MHz tsk(pp) Notes: 1. See test circuits and waveforms. 2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz Potato Semiconductor Corporation 3 01/01/10 PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip Test Waveforms Test Circuit 50Ohm Potato Semiconductor Corporation 4 01/01/10 PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip Packaging Mechanical Drawing: 16 pin QSOP Packaging Mechanical Drawing: 16 pin TSSOP Potato Semiconductor Corporation 5 01/01/10 PO49FCT32803G www.potatosemi.com 1.2V - 3.6V 1:7 CMOS Clock Buffered Driver 500MHz TTL/CMOS Potato Chip IC Ordering Information Ordering Code Package Top-Marking TA 16-pin 150mil QSOP Pb-free & Green PO49FCT32803GQ -40°C to 85°C PO49FCT32803GQR for Tape & Reel 16-pin 150mil QSOP Pb-free & Green PO49FCT32803GQ -40°C to 85°C PO49FCT32803GTU for Tube 16-pin 173mil TSSOP Pb-free & Green PO49FCT32803GT -40°C to 85°C PO49FCT32803GTR for Tape & Reel 16-pin 173mil TSSOP Pb-free & Green PO49FCT32803GT -40°C to 85°C PO49FCT32803GQU for Tube IC Package Information PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) TAPE & REEL PIN 1 LOCATION TAPE TRAILER LENGTH Q 16pin 150mil QSOP 12 8 Top Left Corner 39 (12”) T 16pin 173mil TSSOP 12 8 Top Left Corner 39 (12”) PACKAGE CODE Potato Semiconductor Corporation 6 TAPE LEADER LENGTH QTY PER TUBE 3000 64 (20”) 97 3000 64 (20”) 96 QTY PER TAPE 01/01/10