LED-CONVERTER UNIT PS-LD0401-081(S) (22W) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED converter is developed for 2 LED-lines. Optimized for Mitsubishi: AA084VG01 / AA084XB01 APPLICABLE: 2 LED lines LED Voltage max. 48Vdc Lamp Current per line: typ. 60mAdc FEATURES : Internal Open LED Detection for every Line Analog Dimming Remote ON / OFF RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range -20°C ~ +70°C Storage Temperature Range -20°C ~ +85°C Humidity 95 %RH max DIMENSIONS : L x W x H 78 x 38 x 7.2 mm Weight : (11g) typ. Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-1090 53261-1090 Note t=1.0mm Molex or equal Molex or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.1 16th May 2014 LED-CONVERTER UNIT PS-LD0401-081(S) (22W) (PRELIMINARY INFORMATION) Input side CN1: Output side CN2: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 CN 1-9 Symbols Vin Vin Vin Vin GND GND GND GND Vrmt Ratings 10.8 ~ 13.2 Vdc 10.8 ~ 13.2 Vdc 10.8 ~ 13.2 Vdc 10.8 ~ 13.2 Vdc 0 ~ 1.0 = OFF / 2.5 ~ Vin = ON Pin No. CN 2-1 CN 2-2 CN 2-3 CN 2-4 CN 2-5 CN 2-6 CN 2-7 CN 2-8 CN 2-9 Symbols RTN1(-) NC RTN2(-) NC NC NC Vhigh(+) Vhigh(+) Vhigh(+) Ratings LED LINE 1 RETURN CN 1-10 Vbr 0.0 ~ 5.0 (5V=low brightness) CN 2-10 Vhigh(+) max. 48Vdc LED LINE 2 RETURN max. 48Vdc max. 48Vdc max. 48Vdc ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Inrush Current Open Load Shutdown Iout Imin Iin Ip Vbias Note 1 : Vin (V) 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 Specification Vbr (V) Tu (°C) 0 5 0 0 0 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 Min. Typ. Max. TBD TBD 60* 10 1.0 TBD 2.0 6.0 54 48 51 Unit Note mAdc % Adc Apeak Vdc *Note 6 duty cycle analogue volt age *By 12Vdc By full load In case of not needing to connect all outputs please ask factory which pins to connect according to your needs. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.1 16th May 2014 LED-CONVERTER UNIT PS-LD0401-081(S) (22W) (PRELIMINARY INFORMATION) TEST CIRCUIT: CABLES : For input: 500 mm, stripped and tinned ends, order key <input cable #6> For output: 500 mm, stripped and tinned ends, order key <input cable #6> Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.1 16th May 2014