DR1P5 SERIES 1.5WATTS DC-DC CONVERTER FEATURES • 1.5 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 300mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 55% • INPUT RANGE FROM 4.5VDC TO 5.5VDC, 10.8VDC TO 13.2VDC, AND 21.6VDC TO 26.4VDC • FIVE-SIDED EMI SHIELD • LOW OUTPUT RIPPLE & NOISE • PI TYPE INPUT FILTER • 500VDC ISOLATION VOLTAGE • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 2011/95/EC and 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS SMD TYPE APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The DR1P5 series offer 1.5 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible to MKC03 series. DR1P5 series have input voltage of 4.5~5.5VDC, 10.8~13.2VDC and 21.6~26.4VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS 1.5 Watts, max. Input voltage range Output power Voltage accuracy ± 4% 0% Input filter Minimum load Line regulation LL to HL at Full Load ± 0.3% D05 output others Load regulation 25% to 100% FL Cross regulation Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Short circuit protection (Note 5) GENERAL SPECIFICATIONS Input to Output Input(Output) to Case 500VDC ± 5% Maximum case temperature Switching frequency -55ºC ~ +125ºC Natural convection 9 10 ohms, min. 20ºC/watt MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS EN55022 Class A 20kHz, min. Design meet safety standard IEC60950-1, UL60950-1,EN60950-1 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions Page 1 of 3 +100ºC 500VDC, min. 1minute Relative humidity 500VDC, min. 1minute 30pF, max. EMI Isolation capacitance MTBF (Note 1) -30ºC ~ +71ºC See table Vibration Isolation resistance Weight ENVIRONMENTAL SPECIFICATIONS ± 1.5% Operating ambient temperature ± 0.5% Efficiency 4.5 ~ 5.5VDC 10.8 ~ 13.2VDC 21.6 ~ 26.4VDC Pi type See table Storage temperature range ±0.02% / ºC, max. Thermal impedance 1 Sec. Thermal shock Temperature coefficient Isolation voltage 5VDC nominal input 12VDC nominal input 24VDC nominal input DIP SMD MIL-HDBK-217F 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 16g (0.55oz) 18g (0.62oz) 1.265 x 107 hrs www.pduke.com 2013/09/13 DR1P5 SERIES 1.5WATTS Model Number Input Range Output Voltage Output Current Min. load DR1P5-05S05 DR1P5-05S12 DR1P5-05S15 DR1P5-05D05 DR1P5-05D12 DR1P5-05D15 DR1P5-12S05 DR1P5-12S12 DR1P5-12S15 DR1P5-12D05 DR1P5-12D12 DR1P5-12D15 DR1P5-24S05 DR1P5-24S12 DR1P5-24S15 DR1P5-24D05 DR1P5-24D12 DR1P5-24D15 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA DC-DC CONVERTER (3) (2) (3) Full load Output Ripple & Noise No load Input Current Eff (%) Capacitor (4) Load max 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 300mA 125mA 100mA 200mA/-100mA ± 60mA ± 50mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 65mA 80mA 95mA 50mA 90mA 100mA 30mA 30mA 40mA 30mA 45mA 40mA 20mA 20mA 20mA 15mA 20mA 20mA 54 52 55 48 51 54 55 52 55 49 51 54 54 52 55 48 51 54 470µF 330µF 330µF 330µF 110µF 110µF 470µF 330µF 330µF 330µF 110µF 110µF 470µF 330µF 330µF 330µF 110µF 110µF Note 1. 2. 3. 4. MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input and no load. Typical value at nominal input and full load. Test by minimum input and constant resistive load. CAUTION: This power module is not internally fused. An input line fuse must always be used. DR1P5-24S05 Derating Curve DR1P5-24S05 Efficiency VS Input Voltage Page 2 of 3 DR1P5-24S05 Efficiency VS Output Load www.pduke.com 2013/09/13 DR1P5 SERIES 1.5WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.014 (0.35) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION PIN 1 2 3 10 11 12 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT Page 3 of 3 DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT PIN 24 23 22 15 14 13 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT SMD PIN CONNECTION DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT PIN 1 2 3 10 11 12 Others www.pduke.com SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT NC DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT NC PIN 24 23 22 15 14 13 SINGLE +INPUT NC NC -OUTPUT +OUTPUT -INPUT DUAL +INPUT -OUTPUT COMMON COMMON +OUTPUT -INPUT 2013/09/13