VER:03 1 / 3 • 3 WATTS REGULATED OUTPUT POWER • 2:1 WIDE INPUT VOLTAGE RANGE • INTERNATIONAL SAFETY STANDARD APPROVAL • INCLUDE 3.3VDC OUTPUT • HIGH EFFICIENCY UP TO 80% • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • DUAL SEPARATE OUTPUT UL E193009 TUV CB CE MARK The PMKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature. PMKC03 series have 2:1 wide input voltage of 4.5-6, 9-18, 18-36 and 36-75VDC. The PMKC03 features 1600VDC of isolation, short-circuit protection. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 3 Watts max Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 1) 10% of FL ± 0.2% ± 0.5% LL to HL at Full Load DS 25% to 100% FL Single Dual DS Line regulation Load regulation ± 0.2% ± 2% ± 0.5% Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Temperature coefficient 3.3V/5V 75mVp-p others 1%/p-p of Vout max ±0.02% / ºC, max Transient response recovery time 25% load step change Over load protection % of FL at nominal input Short circuit protection ± 5% 500uS 180% typ Continuous, automatics recovery 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 6VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 5V input 12V input 24V input 48V input Input reflected ripple (Note2) Nominal Vin and full load Start up time Nominal Vin and constant resistive load OUTPUT POWER (%) See table Input to Output Isolation voltage DS Type, Output to Output 1600VDC, min 500VDC, min 9 Isolation resistance 10 ohms, min Isolation capacitance 300pF, max Switching frequency 100KHz, min Approvals and standard IEC60950-1, UL1950-1, EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 14g (0.48oz) 15g (0.52oz) Dimensions Weight DIP SMD 6 MTBF (Note 3) 3.706 x 10 hrs ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Efficiency 15VDC 36VDC 50VDC 100VDC 120mAp-p Power up PMKC03-48S05 Derating Curve 30mS typ Operating temperature range -25ºC ~ +71ºC Storage temperature range -55ºC ~ +105ºC Thermal shock MIL-STD-810D Vibration 10~55Hz, 10G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Conducted emissions EN55022 Class A Radiated emissions EN55022 ESD EN61000-4-2 Perf. Criteria B Class A Radiated immunity EN61000-4-3 Perf. Criteria A Fast transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted immunity EN61000-4-6 Perf. Criteria A 100 75 50 Nature convection 25 0 -40-25-10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (ºC) VER:03 (4) (5) Model Number Input Range Output Voltage Output Current Input Current Eff (%) PMKC03-05S33 PMKC03-05S05 PMKC03-05S12 PMKC03-05S15 PMKC03-05D05 PMKC03-05D12 PMKC03-05D15 PMKC03-05DS05 PMKC03-05DS12 PMKC03-05DS15 PMKC03-12S33 PMKC03-12S05 PMKC03-12S12 PMKC03-12S15 PMKC03-12D05 PMKC03-12D12 PMKC03-12D15 PMKC03-12DS05 PMKC03-12DS12 PMKC03-12DS15 PMKC03-24S33 PMKC03-24S05 PMKC03-24S12 PMKC03-24S15 PMKC03-24D05 PMKC03-24D12 PMKC03-24D15 PMKC03-24DS05 PMKC03-24DS12 PMKC03-24DS15 PMKC03-48S33 PMKC03-48S05 PMKC03-48S12 PMKC03-48S15 PMKC03-48D05 PMKC03-48D12 PMKC03-48D15 PMKC03-48DS05 PMKC03-48DS12 PMKC03-48DS15 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 4.5 – 6 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 600mA 600mA 250mA 200mA ± 300mA ± 125mA ± 100mA V1:300mA; V2:300mA V1:125mA; V2:125mA V1:100mA; V2:100mA 600mA 600mA 250mA 200mA ± 300mA ± 125mA ± 100mA V1:300mA; V2:300mA V1:125mA; V2:125mA V1:100mA; V2:100mA 600mA 600mA 250mA 200mA ± 300mA ± 125mA ± 100mA V1:300mA; V2:300mA V1:125mA; V2:125mA V1:100mA; V2:100mA 600mA 600mA 250mA 200mA ± 300mA ± 125mA ± 100mA V1:300mA; V2:300mA V1:125mA; V2:125mA V1:100mA; V2:100mA 609mA 857mA 845mA 845mA 870mA 845mA 845mA 870mA 845mA 870mA 252mA 352mA 334mA 334mA 357mA 334mA 334mA 357mA 334mA 334mA 126mA 174mA 165mA 165mA 174mA 167mA 164mA 174mA 167mA 164mA 61mA 88mA 84mA 84mA 86mA 84mA 84mA 86mA 84mA 84mA 69 74 75 75 73 75 75 73 75 73 70 75 79 79 74 79 79 74 79 79 70 76 80 80 76 79 80 76 79 80 72 75 79 79 77 79 79 77 79 79 V1:5 VDC;V2:5 VDC V1:12 VDC;V2: 12VDC V1:15 VDC;V2:15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2: 12VDC V1:15 VDC;V2:15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2: 12VDC V1:15 VDC;V2:15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2: 12VDC V1:15 VDC;V2:15 VDC 2 / 3 (6) Capacitor Load max 2200uF 1000uF 170uF 110uF ± 500uF ± 96uF ± 47uF V1:500uF;V2:500uF V1:96uF;V2:96uF V1:47uF;V2:47uF 2200uF 1000uF 170uF 110uF ± 500uF ± 96uF ± 47uF V1:500uF;V2:500uF V1:96uF;V2:96uF V1:47uF;V2:47uF 2200uF 1000uF 170uF 110uF ± 500uF ± 96uF ± 47uF V1:500uF;V2:500uF V1:96uF;V2:96uF V1:47uF;V2:47uF 2200uF 1000uF 170uF 110uF ± 500uF ± 96uF ± 47uF V1:500uF;V2:500uF V1:96uF;V2:96uF V1:47uF;V2:47uF Note 1. 2. 3. 4. 5. 6. The PMKC03 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification Please add an external filter at converter input terminals when measuring input reflected ripple, as figure 1. L: Simulated source impedance of 12uH C: Nippon chemi-con KMF series 47uF/100V BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. Figure 1 VER:03 Pin size is 0.02(0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular pin 20 1 BOTTOM 0.44(11.2) 0.43(10.9) 5 0.15 (3.8) 0.40 (10.2) Pin Area 0.04 x 0.02 (1.0 x 0.5) 16 9 13 12 0.25 (6.35) VIEW 10 11 12 0.60(15.2) 3 1.26 (32.0) 24 0.15 (3.81) 0.02(0.5) 0.10 (2.5) 0.90 (22.9) 1.25 (31.8) 15 14 13 1.00(25.4) 0.92(23.4) 1 2 3 24 23 22 / Suffix-SMD 0.10 (2.54) 0.08(2.0) 3 0.80(20.3) 0.80(20.3) All dimensions in inches(mm) Tolerance : x.xx±0.02(x.x±0.5) x.xxx±0.01(x.xx±0.25) Pin pitch tolerance ±0.014(0.35) SMD PIN CONNECTION DIP PIN CONNECTION PIN 1 2 3 10 11 12 SINGLE DUAL + INPUT + INPUT NC - OUTPUT NC COMMON -OUTPUT COMMON +OUTPUT +OUTPUT - INPUT - INPUT DS PIN + INPUT - V1 out 24 23 22 15 14 13 + V1 out - V2 out + V2 out - INPUT SINGLE DUAL + INPUT + INPUT NC - OUTPUT NC COMMON - OUTPUT COMMON +OUTPUT +OUTPUT - INPUT - INPUT DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT PIN SINGLE DUAL 1 + INPUT + INPUT 2 NC - OUTPUT 3 NC COMMON 10 -OUTPUT COMMON 11 +OUTPUT +OUTPUT 12 - INPUT - INPUT Others NC NC DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT NC PIN SINGLE DUAL 24 + INPUT + INPUT 23 NC - OUTPUT 22 NC COMMON 15 -OUTPUT COMMON 14 +OUTPUT +OUTPUT 13 - INPUT - INPUT Others NC NC DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT NC