Release by PARA LIGHT DCC PARA LIGHT ELECTRONICS CO.,LTD Tel：886-2-2225-3733 Mail:[email protected] Fax：886-2-2225-4800 Website: http://www.para.com.tw Data Sheet Product Name: LED Projection Lamp Model Number : PARA-SPL-40WDF-QHA-CW-U Version: A /0 Producer: Zhuang Wei Doc. No. : DS-80-14-XXXX Auditing: Yang Xiao Guang Approval: Date : 2014/3/20 Page : 1 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 FEATURES： - Aluminum die casting heat sink base with Natural convection heat dissipation - Integrated CREE X Lamp LED and the LED projection lamp has high power efficiency - LED projection lamp has instant on/off features and hasn’t flicker effect - Does not produce ultra violet (UV) light or IR - All materials meet green product according to RoHS requirement - Universal AC input /Full range, 100~277Vac / 50~60Hz - The viewing angle is 25° - Short circuit / Over current / Over voltage / Over temperature protection - The LED projection lamp has low power consumption - IP65 design for outdoor - Good light distribution: no multi-shadow - The LED projection lamp has long operation life time and better than 2 years - The product comply with UL certification, the registered number is E353926 PURPOSE: - Provide the standards for solid state lighting, including LED linear light, LED bulb, LED down light, LED panel light, LED projection lamp, etc. APPLICATION: - The main application is using on big area such as mine, building surface, stadium, bridge, monument, garden and so on. ENVIRONMENTAL CONDITION: - The environmental condition as below: Item Condition Operation Temperature [°C ] -20 ~ 40 Operation Humidity [ % ] 8 ~ 90 Storage Temperature [°C ] -20 ~ 40 Storage Humidity 5 ~ 90 [%] Doc. No. : DS-80-14-XXXX Notes Date : 2014/3/20 Page : 2 Release LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U PARA LIGHT DCC Version: A /0 PRODUCT SPECIFICATION: - Photo： - Outline dimensions： 325 180 112 - Note: 1.All dimension unit is millimeters 2.The tolerance is ±5mm unless otherwise noted Doc. No. : DS-80-14-XXXX Date : 2014/3/20 by Page : 3 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Technical parameters： Input Voltage Range 100~277Vac Input 50/60 Hz Frequency LED Type Cree X Lamp XB-D LED Quantity 28Pcs IP Rate IP65 Power Consumption 40 W±10% Luminous Flux >5000 lm Color Temperature 6000K±500K Power Factor >0.9 Light Source Life Span >25000 Hrs - LED light panel circuit 1. Circuit: 7series, Doc. No. : DS-80-14-XXXX 4parallels, 28ea white LED Date : 2014/3/20 Page : 4 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Optical Specification 1. Measurement Condition 1-1 Environmental Temperature：25 ± 2oC 1-2 Environmental Humidity：50% ± 20% 1-3 Environmental Luminance：Less than 10(lx) and windless (Typical) 2. Measurement Equipment 2-1 Illumination meter: GMS-2000 2-2 The PARA LIGHT inspection result is to be taken as the standard. Before approval, both PARA LIGHT and customer should inspect and correct the optical data measured by PARA LIGHT and customer, 3. Measuring means Light Module Distance, L = 2 m Illumination Meter 4. Luminance Specification Model Name PARA-SPL-40WDF-QHA-CW-U Items Position Min Typ Max Units Illumination Center 5000 - - Lumen CCT Center 5500 6000 6500 K Doc. No. : DS-80-14-XXXX Date : 2014/3/20 Notes Page : 5 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Light intensity distribution ( Unit: CD ): - Illumination at a distance： Doc. No. : DS-80-14-XXXX Date : 2014/3/20 Page : 6 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Reliability Test Specification No 1 Item Normal temperature operation Condition Ta=25oC, power on Time Judgment 10,000h A,B o 2 High temperature operation Ta=60 C , power on 1,000h A,B 3 Low temperature operation Ta=-40oC , power on 1,000h A,B 4 High temperature and humidity Ta=60oC , RH=90% ,power on 1,000h A,B 5 Thermal shock Ta=-40~85oC 1,000 cy A,B 6 High temperature on/off cycle Ta=60oC, power on/off 50times C 7 Low temperature on/off cycle Ta=-40oC, power on/off 50times C 8 Power on/off test Ta=25 oC, power on/off 30,000cy C 9 High temperature storage Ta=85 oC 1,000h A,B 1,000h A,B 1,000h A,B 10 High temp and humidity storage Ta=60 oC, RH=90% 11 Low temperature storage Ta=-40 oC 3hrs B,D 13 Waterproof test Vibration frequency:10~45Hz Vibration testHz:45Hz Operation vibration test:3hrs Shock:3G(x,y), 4G(z) IP65 standard 30min E,F 14 MTBF Ta=45 oC, RH=85% 2,160h G 12 Vibration test 1. Criteria: 1-1 A. Luminance must maintain more than 80% of the initial illumination intensity. 1-2 B. Apparent condition and structure have not abnormality. 1-3 C. There not being lighting abnormality at normal temperature. 1-4 D. There is no damage of the soldering point and defective lighting. 1-5 E. Ingress Protection code is more than 5. 1-6 F. There not decrease in performance by the water and the problem of the function. 1-7 G. Lifetime is more than 25,000 hours by lifetime prediction. Doc. No. : DS-80-14-XXXX Date : 2014/3/20 Page : 7 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Installing and Using: 1. Hold on a lamp arm:(The lamp arm is not including in this product) Secure lamp head assembly to the end of the lamp arm with 3/8-inch lag bolt. 2. Mounting: 2-1. Select a location (Brick, Block or Concrete wall) and drill three holes, 3/8” Diameter x 3” Length. Be sure to select the proper holes pattern for the model being installed. Recommended mounting height is 6-½ feet or higher. 2-2.For solid surfaces: 3/8-inch lag bolts with appropriate expansion anchors are recommended. 2-3.For hollow walls with no rear access, toggle bolts with expansion wings are recommended. 2-4. For hollow wall with rear access, use 3/8-inch bolts, washers, lock washers and nuts. - Packing Specification 1. Put maximum 4 pieces LED projection lamp into outer carton. 2. Prevent LED projection lamp defect during transportation. 3. Complete the transportation simulation tests (Vibration frequency:10~45Hz / Vibration test Hz:45Hz / Operation vibration test:3hrs / Shock:3G(x,y), 4G(z) ) and no LED projection lamp defect happened. 4.Using appropriate dust prevented approach for component and product that no dust source similar with sediment and unusual glutinous objects. Doc. No. : DS-80-14-XXXX Date : 2014/3/20 Page : 8 Release by PARA LIGHT DCC LED Projection Lamp PARA-SPL-40WDF-QHA-CW-U Version: A /0 - Packing Flow 1. Put 1set LED projection lamp into inner carton 2. Put 4 sets inner carton with 4 pieces LED projection lamp into outer carton. Doc. No. : DS-80-14-XXXX Date : 2014/3/20 Page : 9