Release PARA tit PARA LIGHT DCC PARA LIGHT ELECTRONICS CO.,LTD Tel: 8 8 6 - 2 - 2 2 2 5 - 3 7 3 3 Mail:[email protected] Fax: 886-2-2225-4800 Website: http://www.para.com.tw Data Sheet Product Name : L E D High Bay Light Model Number: M I L F 1 0 0 W C W C 1 Version: A / 1 ^ Producer: Zhuang W e i Doc. No. : D S - 8 0 - 1 4 - X X X X Auditi //i 1 k Approval:. Date : 2 0 1 4 / 5 / 5 by Page : 1 Release LED Projection Lamp PARA LIGHT DCC MILF100WCWC1 Version: A /1 FEATURES： - Aluminum die casting heat sink base with Natural convection heat dissipation - Integrated CREE X Lamp LED and the LED High Bay Light has high power efficiency -LED High Bay Light has instant on/off features and hasn’t flicker effect - Does not produce ultra violet (UV) light or IR - All materials meet green product according to RoHS requirement - Universal AC input /Full range, 100~277Vac / 50~60Hz - Short circuit / Over current / Over voltage / Over temperature protection - TheLED High Bay Light has low power consumption - IP31 design for indoor - Good light distribution: no multi-shadow - TheLED High Bay Light has long operation life time and better than 2 years PURPOSE: - Provide the standards for solid state lighting, including LED linear light, LED bulb, LED down light, LED panel light, LED High Bay Light, etc. APPLICATION: -This series of LED High Bay Light Suitable for: industrial plants, stadiums, malls, supermarkets, and other tall private room and commercial lighting. ENVIRONMENTAL CONDITION: - The environmental condition as below: Item Condition Operation Temperature [°C ] -20 ~ 40 Operation Humidity [ % ] 8 ~ 90 Storage Temperature [°C ] -20 ~ 40 Storage Humidity 5 ~ 90 [%] Doc. No. : DS-80-14-XXXX by Notes Date : 2014/5/5 Page : 2 Release PARA LIGHT DCC LED Projection Lamp MILF100WCWC1 Version: A /1 PRODUCT SPECIFICATION: - Photo： - Outline dimensions： 215mm(8.5") 330mm (13.0") - Note: 1.All dimension unit is millimeters 2.The tolerance is ±10mm unless otherwise noted Doc. No. : DS-80-14-XXXX by Date : 2014/5/5 Page : 3 Release LED Projection Lamp MILF100WCWC1 - PARA LIGHT DCC Version: A /1 Technical parameters Input Voltage Range 100~277Vac Input 50/60 Hz Frequency LED Type 3535 LED Quantity 42Pcs IP Rate IP31 Power Consumption 100 W±10% Luminous Flux >7500 lm Luminous Efficiency 75lm/W Color Temperature 6000K±500K Power Factor >0.9 Color Rendering Index >70 Light Source Life Span >25000 Hrs - LED light panel circuit 1. Circuit: 14series, Doc. No. : DS-80-14-XXXX 3parallels, 42ea white LED Date : 2014/5/5 by Page : 4 Release LED Projection Lamp PARA LIGHT DCC MILF100WCWC1 Version: A /1 - Optical Specification 1. Measurement Condition 1-1 Environmental Temperature：25 ± 2oC 1-2 Environmental Humidity：50% ± 20% 1-3 Environmental Luminance：Less than 10(lx) and windless (Typical) 2. Measurement Equipment 2-1 Illumination meter: GMS-2000 2-2 The PARA LIGHT inspection result is to be taken as the standard. Before approval, both PARA LIGHT and customer should inspect and correct the optical data measured by PARA LIGHT and customer, 3. Measuring means Light Module Distance, L = 2 m Illumination Meter 4. Luminance Specification Model Name MILF100WCWC1 Items Position Min Typ Max Units Illumination Center 7500 - - Lumen CCT Center 5500 6000 6500 K Doc. No. : DS-80-14-XXXX by Date : 2014/5/5 Notes Page : 5 Release PARA LIGHT DCC LED Projection Lamp MILF100WCWC1 Version: A /1 - Light intensity distribution ( Unit: CD ) - Illumination at a distance Doc. No. : DS-80-14-XXXX Date : 2014/5/5 by Page : 6 Release PARA LIGHT DCC LED Projection Lamp MILF100WCWC1 Version: A /1 - Reliability Test Specification No Item Condition Time Judgment 1 Normal temperature operation Ta=25oC, power on 10,000h A,B 2 High temperature operation Ta=60oC , power on 1,000h A,B 3 Low temperature operation Ta=-40oC , power on 1,000h A,B o 1,000h A,B 4 High temperature and humidity Ta=60 C , RH=90% ,power on 5 Thermal shock Ta=-40~85oC 1,000 cy A,B 6 High temperature on/off cycle Ta=60oC, power on/off 50times C 7 Low temperature on/off cycle Ta=-40oC, power on/off 50times C 8 Power on/off test Ta=25 oC, power on/off 30,000cy C 9 High temperature storage Ta=85 oC 1,000h A,B 1,000h A,B 1,000h A,B 10 High temp and humidity storage Ta=60 oC, RH=90% 11 Low temperature storage Ta=-40 oC 3hrs B,D 13 Waterproof test Vibration frequency:10~45Hz Vibration testHz:45Hz Operation vibration test:3hrs Shock:3G(x,y), 4G(z) IP31 standard 30min E,F 14 MTBF Ta=45 oC, RH=85% 2,160h G 12 Vibration test 1. Criteria: 1-1 A. Luminance must maintain more than70% of the initial illumination intensity. 1-2 B. Apparent condition and structure have not abnormality. 1-3 C. There not being lighting abnormality at normal temperature. 1-4 D. There is no damage of the soldering point and defective lighting. 1-5 E. Ingress Protection code is more than 5. 1-6 F. There not decrease in performance by the water and the problem of the function. 1-7 G. Lifetime is more than 25,000 hours by lifetime prediction. Doc. No. : DS-80-14-XXXX Date : 2014/5/5 by Page : 7 Release PARA LIGHT DCC LED Projection Lamp MILF100WCWC1 Version: A /1 - Installing and Using: 1. This product is suitable for AC power supply network; the using ambient temperature range is -20 ℃ ~ 60 ℃.. 2. Mounting: 2-1. Assemble the hook 【1】 in advance on the ceiling where need to assemble the l ight .The hook need to match with the pothook and strong enough to bear 30KG at least. 2-2. Screw the screw at 【2】by cross screwdriver recommended. 2-3. Hang the light on hook【3】 2-4. Screw the screw which take down from step 3 into the hole of hook 【4】 2-5. The hook rope lock attached to the ceiling hook 【5】 2-6. Connect with power supply network. (1) (2) (3) (4) (5) 3. After finished above steps，check again and then switch on the power. Doc. No. : DS-80-14-XXXX by Date : 2014/5/5 Page : 8 Release LED Projection Lamp MILF100WCWC1 PARA LIGHT DCC Version: A /1 - Packing Specification 1. Put maximum 1 pieces LED High Bay Light into outer carton. 2. Prevent LED High Bay Light defect during transportation. 3. Complete the transportation simulation tests (Vibration frequency:10~45Hz / Vibration test Hz:45Hz / Operation vibration test:3hrs / Shock:3G(x,y), 4G(z) ) and no LED projection lamp defect happened. 4.Using appropriate dust prevented approach for component and product that no dust source similar with sediment and unusual glutinous objects. - Packing Flow 1. As shown below: Doc. No. : DS-80-14-XXXX Date : 2014/5/5 by Page : 9