RENESAS M3T-DIRECT100S

M3T-DIRECT100S
Direct Dummy IC for 100-pin 0.65mm-pitch QFP
Dimensions
Function
This accessory tool connects an emulation pod and the target. It
can be mounted on the same foot pattern as the MCU housed in
the 100-pin 0.65mm-pitch QFP (100P6S-A or 100P6S-E)
package.
Attaching Procedure
Mount this dummy IC on the foot pattern on the target. Then
connect the emulation pod to the connector provided at the top of
this dummy IC.
① denotes pin numbers on the M3T-DIRECT100S.
1 denotes pin numbers of the top of a connector.
*
: Position of No. 1 pin
Symbol
Term
Dimensions [mm]
A
Fitting height
5.4
D
Package length
17.0
E
Package width
23.0
e
Interval in row of pins
0.65
M
Mount pad size
6.3
Foot Pattern Reference Dimensions
See Appendix C "Reference Dimensional Drawings for Common
100-pin 0.65mm-pitch QFP Foot Pattern".
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.