PC10L

PRELIMINARY
50 Amp Latching PCB Relay
PC10
FEATURES
 Energy Saving Latching Operation
 50 Amp Switching Capacity
 5,000 Watt Lamp Load
 5 HP Motor Load
 Max Inrush Current 500 Amp / 2 msec
 4kV Dielectric Between Contacts and Coil
 Single or Dual Coil Latching
 Manual Topside Switch
 39.0 x 25.0 x 15.0mm Package Dimensions,
Narrowest in the Industry
 Lead Free and RoHS Compliant
E93379
UL/CSA Ratings at 25C (Pending)
PC10
Voltage
Load Type
Resistive 6,000 Cycles
Incandescent Lamp 3,000 Cycles
Incandescent Lamp 3,000 Cycles
Electronic Ballast 6,000 Cycles
Motor Load 3,000 Cycles
277 VAC
240 VAC
277 VAC
280 VAC
277 VAC
1 Form A
(SPST-NO)
50 A
5,000 W
16 A
16 A
5 HP
CONTACT DATA
Material
Initial Contact Resistance
Maximum Switching Voltage
Maximum Switching Current
Maximum Switching Power
AgSnO2
≤ 20mΩ initial
440VAC
50 A
12,500 VA
Service Life
Electrical
Mechanical
See Contact Data
1 x 10⁶ Operations
COIL DATA—Dual Coil on Next Page
Single Coil
Resistance
(Ohms ± 10%)
Coil Voltage
Must Operate
Pulse
Voltage Max
Magnitude
Power
Time
Time
(VDC)
(msec)
(Watts)
(msec)
(msec)
≥ 50
1.5
≤ 15
≤ 15
Rated
Maximum
6
7
24
4.8
9
10.6
54
7.2
12
14.4
96
9.6
24
28.8
384
19.2
48
56
1,536
38.4
Coil
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
Operate
Reset
www.PickerComponents.com
e-mail: [email protected]
PCTxL Rev A 7/30/14
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.
PCT90xL
PCT90xL
COIL DATA—Continued
Dual Coil
Resistance
(Ohms ± 10%)
Coil Voltage
Must Operate
Pulse
Voltage Max
Magnitude
Power
Time
Time
(VDC)
(msec)
(Watts)
(msec)
(msec)
≥ 50
2 x 3.0
≤ 15
≤ 15
Rated
Maximum
6
7
12 + 12
4.8
9
10.6
27 + 27
7.2
12
14.4
48 + 48
9.6
24
28.8
192 + 192
19.2
48
56
768 + 768
38.4
Coil
Operate
Reset
CHARACTERISTICS
Operate Time
Release Time
Insulation Resistance
Dielectric Strength
Between Contact and Coil
Between Contacts
Creepage Distance
Shock Resistance
Functional
Survival
Vibration Resistance
Terminal Strength
Solderability
Operating Temperature
Storage Temperature
Relative Humidity
Weight
≤ 15 msec
≤ 15 msec
1,000 MΩ min @ 500VDC
50 Hz 4.000V 1 minute
50 Hz 1,500V 1 minute
8 mm
98 m/s² 11 msec
980 m/s² 11 msec
10-55 Hz Double Amplitude 1.5mm
10 N
235⁰C ± 2⁰C 3 sec ± 0.5 sec
-40⁰C to +70⁰C
-40⁰C to +125⁰C
85% at 40⁰C
32 grams
ORDERING INFORMATION
Example:
PC10L
-1A
-12
D
-X
Model: PC10L
Contact Form: 1A
Coil Voltage: 3, 9, 12, 24, 48
Enclosure: Nil: Dust Cover
Coil:
Nil: Single Coil 1.5W, D: Double Coil 2x3.0 W
Polarity: Nil: Standard, R: Reverse Polarity
RoHS Compliant: -X
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: [email protected]
PCTxL Rev A 7/30/14
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.
PCT90xL
PCT90xL
DIMENSIONS (mm / inches)
PIN LAYOUT (mm / inches)
SCHEMATIC
1A
1A Reverse
1A Dual
1A Dual Reverse
NOTES:
With the Dual Coil Version, the Latch and Reset Coils should not be pulsed at the same time for it is possible to set the relay into
a magnetically neutral position. Coils should not be pulsed with less than the rated coil voltage and the pulse width should be a
minimum of three times the specified operate time. If not, it is possible for the relay to settle in a magnetically neutral position.
Must Operate Voltage is listed for test purposes only and is not to be used as design criteria.
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: [email protected]
PCTxL Rev A 7/30/14
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.