50 Amp Power PCB Relay PTRE-T FEATURES Most Popular Power PCB Relay Footprint - T90 50 Amp 240 VAC General Purpose UL Rating 2 HP 250 VAC Rating UL Class F Insulation Standard Meets UL 508 and UL 873 Spacing Epoxy Sealed, Immersion Cleanable RoHS Compliant E160644 at 40°C FACTORY RATINGS 1 Form A 1 Form B (SPST-NO) (SPST-NC) Load Type Voltage Resistive 6,000 Cycles 240 VAC 30 VDC 50 A Lamp 3,000 Cycles 240 VAC Electric Ballast 6,000 Cycles 280 VAC Motor Load 3,000 Cycles 250 VAC 1 Form C NO NC 40 A 50 A 40 A TV-5 — TV-5 — 5A — 5A — 2 HP 1,5 HP Load Type 1 Form C (SPDT) Voltage NO CONTACT DATA Material Initial Contact Resistance Maximum Switching Voltage Maximum Switching Current Maximum Switching Power 2 HP 1.5 HP 15 ms Max. 15 ms Max 1,000 MΩ min, at 500 VDC Service Life 50 Hz 2,500 V 1 Min Between Coil and Contacts AgSnO2 30 mΩ Max. @ 1 A, 6 VDC 110 VDC, 300 VAC 50 A 1,500 W, 12,000 VA Mechanical Electrical 1 X 107 Operations 5 X 104 Operations 50 Hz 1,500 V 1 min. Between Contacts 235 ºC for 3 secs Solderability Operating Temperature Range - 55°C to 100°C Shock Resistance 200 m/s2, 11 ms Storage Temperature Range - 40°C to 155°C Vibration Resistance 10 - 55 Hz Double Amplitude Relative Humidity 85% (at 40°C) Terminal Strength 10N Weight 33 gr Power Consumption 1.5 W Material Compliant To: EU RoHS V2, EU Reach V3 Dielectric Strength ORDERING INFORMATION Example: PTRE -1C -12 S T Model: PTRE-T Contact Form: 1A, 1B, or 1C Coil Voltage: 3, 5, 6, 9, 12, 15, 18, 24, 48, 110 Configuration: Nil: Open Frame; C: Dust Cover; E: Epoxy Sealed, Not Water Washable Contact Material: Nil: AgCdO; T: AgSnOInO Insulation Material: F: UL Class F Mounting Type: T2: Form 1A or 1B PCB&QC, T3: Form 1C PCB&QC, OT4: 1A or 1B Panel all QC with Mounting Fins, OT5: 1C Panel all QC with Mounting Fins RoHS Compliant: -X Pinout: A: Alternate Quick Connect Pinout 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PTRE Rev C 7/30/15 NC General Purpose 10,000 240 VAC/30 VDC 50 A 35 A (Resistive) 50.000 240 VAC/30 VDC 40 A 30 A Meets UL 508 and UL 873 Spacing - 3.18 mm Through Air, 6.36 mm Over Surface. CHARACTERISTIC Operate Time Release Time Insulation Resistance Cycles -T5 -X www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 1 of 2 PTRE-T PTRE-T COIL DATA Coil Voltage Rated 3 5 6 9 12 15 18 24 48 110 Max 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143 Resistance (Ohms ± 10%) Must Operate Voltage Max (VDC) Must Release Voltage Min. (VDC) Coil Power (W) 6.0 16.7 24.0 54.0 96.0 150 216 384 1,536 8,067 2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 36.00 82.50 0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 4.8 11.0 1.5 NOTES: The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria. Dimensions are in mm, Inches are listed for reference only. DIMENSIONS (mm/inches) Knock off, on top corner, nib for ventilation after soldering and water wash. T4 & T5 T2 & T3 Mounting (Bottom View) Wiring Diagram (Bottom View) 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PTRE Rev C 7/30/15 www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 2 of 2