PC302 Microminiature 1 Amp Signal Relay FEATURES Microminiature design DIL Package for PC board or socket Low 5mm profile Meets FCC part 68 voltage surge Bifurcated contacts for high sensitivity Single and dual coil latching available Sealed, immersion cleanable File # E86876 CONTACT DATA UL/CSA RATINGS Contact Form Rated Load Max. Operating Voltage Max. Continuous Current Minimum Permissible Load 2 Form C DPDT (bifurcated contacts) 0.5 A at 125 VAC, 2A at 30 VDC 250 VAC, 220 VDC 2 Amp 10 micro A, 10 mVDC Material AgPd + Au (Silver Palladium + Gold Plate) Initial Contact Resistance 50 mOhm max @ 1mA, 20mV, 1KHz, meets DIN 4160 part 4 Service Life 5 Mechanical 2 X 10 Operations Electrical 1 X 10 8 Operations COIL DATA Type Single Side Stable .140 W Single Coil Latching .100 W Dual Coil Latching .200 W Coil Resistance Voltage ohms + 10% Coil Power Consumption mW Must Operate Voltage Max. (VDC) Release Voltage Or Reset Voltage Maximum 0.3 0.5 6.0 10 140 140 Voltage 3 5 64.3 178 2.25 3.75 6 9 257 579 4.50 6.75 0.6 0.9 12 19 140 140 12 24 3 1028 2880 90 9.00 18.0 1.2 2.4 -2.25 48 40.8 5.7 140 200 100 5 6 4.50 6.75 -3.75 -4.5 -6.75 9.5 11.4 17.1 100 100 100 2.25 3.75 9 250 360 810 12 24 1440 3840 9.00 18.0 -9.00 -18.0 22.8 45.6 100 150 3 5 45 125 180 2.25 3.75 2.25 3.75 4.50 6.75 4.50 6.75 4.5 7.5 9.0 200 200 200 9.00 18.0 9.00 18.0 13.5 18.0 36.0 200 200 300 6 9 405 720 1290 12 24 ORDERING INFORMATION Example: PC302 -12 -L1 -X Model Coil Voltage Type of Operation Nil: Single Side Stable L1: Single Coil Latching L2: Dual Coil Latching RoHS Compliant Nil: Not Rohs, -X: RoHS Compliant 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PC302 Rev C 7-9-09 PAGE 1 PC302 PC302 CHARACTERISTICS Single Side stable Latching, L1 & L2 2 ms at nominal coil voltage N/A N/A 2 ms at nominal coil voltage 1 ms average N/A 2 ms at nominal coil voltage. N/A 1000 Mmegohms min. at 500 VDC, 50% RH 1000 V rms, 1 min. between coil and contacts and between adjacent parts 500 V rms, 1 min. between open contacts Type Operate Time Set Time Release Time Reset Time Insulation Resistance Dielectric Strength Surge Strength Capacitance Shock Resistance Vibration Resistance Allowable Max. Power Consumption at 20 C 1500 V, between coil and contacts (FCC Part 68) 0.4 pf max. between contacts; 0.2 pf max. between adjacent poles; 0.9 pf max. between coil and contacts 50 g, 11 ms. 10 - 55 Hz; 3mm DA Ambient Temperature Power Consumption Weight -40 degrees C to 70 degrees C 0.14 to 0.2 W 5 grams approx. 0.4 W -40degrees C to 70 degrees C 0.1 to 0.3 W Dimensions in Inches (millimeters) Drawings are 2X actual size .354 (9.0) .551 (14.0) .197 (5.0) .100 (2.54)TYP. Single Side Stable 1 2 3 4 .138 (3.5) .300 (7.62) Single Coil Latching 1 5 + 0.1 (2.54) Grid Pattern 10 Holes .032 (0.81) 2 3 4 Dual Coil Latching 1 5 + 2 3 4 5 + Set Coil Reset Coil - 10 9 8 7 6 10 9 8 7 6 + 10 9 8 7 6 Index Mark on top of relay indicates position of pins 1 & 10 Pin Functions Bottom Views Shown Notes: Tolerances + .010 unless otherwise noted On single coil latching set polarity shown 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2