PC303S Microminiature Surface Mount Signal Relay FEATURES Microminiature design .200 inch DIL spacing 7.5 millimeter width Meets FCC part 68 voltage surge Bifurcated contacts for high sensitivity Single coil latching available Sealed, immersion cleanable File # E86876 CONTACT DATA UL/CSA RATINGS Contact Form Rated Load Max. Operating Voltage Max. Switching Power Minimum Permissible Load 2 Form C DPDT (bifurcated contacts) 2A at 30 VDC 220 VDC 60 W 10 micro A, 10 mVDC Material AgPd + Au (Silver Palladium + Gold Plate) Initial Contact Resistance 70 mOhm max @ 1mA, 20mV Service Life 5 Mechanical 1 X 10 Operations Electrical 1 X 10 8 Operations COIL DATA Type Single Side Stable .140 W Single Coil Latching .100 W Coil Power Consumption mW Release Voltage Or Reset Voltage Maximum ohms + 10% Must Operate Voltage Max. (VDC) 3 5 64.3 178 2.25 3.75 0.3 0.5 4.5 7.5 140 140 6 9 257 579 4.50 6.75 0.6 0.9 9.0 13.5 140 140 12 24 1028 2880 9.00 18.0 1.2 2.4 18.0 36.0 140 200 3 90 2.25 -2.25 4.5 100 5 250 3.75 -3.75 7.5 100 6 9 360 810 4.50 6.75 -4.5 -6.75 9.0 13.5 100 100 12 24 1440 3840 9.00 18.0 -9.00 -18.0 18.0 36.0 100 150 Coil Voltage Resistance Voltage Note: Custom coil voltages within the ranges shown are available on special order. ORDERING INFORMATION Example: PC303S -12 -L1 -H Model Coil Voltage Type of Operation Nil: Single Side Stable; L1: Single Coil Latching Type of Surface mount Nil: Standard Surface Mount; H: High Connectivity Mount 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PC303S Rev B 4-6-04 PAGE 1 PC303S PC303S CHARACTERISTICS Type Operate Time Set Time Release Time Reset Time Insulation Resistance Dielectric Strength Single Side stable Single Coil Latching Less than 4 ms at nominal coil voltage N/A N/A Less than 4 ms at nominal coil voltage Less than 4 ms at nominal coil voltage N/A N/A Less than 4 ms at nominal coil voltage. 1000 Mmegohms min. at 500 VDC, 50% RH 2000 V rms, 1 min. between coil and contacts and between adjacent parts 1000 V rms, 1 min. between open contacts 2500 V, between coil and contacts (FCC Part 68) 0.4 pf max. between contacts; 0.2 pf max. between adjacent poles; 0.9 pf max. between coil and contacts Min 750 m/s2 (75 G) 10 - 55 Hz; 3.3 mm DA Surge Strength Capacitance Shock Resistance Vibration Resistance Allowable Max. Power Consumption at 20 C 0.4 W Ambient Temperature Power Consumption Weight -40 degrees C to 85 degrees C 0.1 to 0.14 W 2 grams approx. Dimensions in Inches (millimeters) Drawings are 2X actual size .100 TYP. (2.54) Standard Mounting .386 (9.8) .591 (15.0) .013 (.325) .200 (5.08) .200 (5.08) .200 (5.08) .370 (9.4) .100 (2.54) .124 (3.16) .039 (1.0) High Connectivity Mounting Soldering Pad Dimensions .386 (9.8) Soldering Pad Temporary Glue Pad .075 (1.9) Single Side Stable 1 .285 (7.24) .295 (7.5) .591 (15.0) 3 4 .200 (5.08) .370 (9.4) Single Coil Latching 5 + 1 3 4 5 12 10 9 8 + - 12 10 9 8 Notes: Pin Functions Bottom View Tolerances + .010 unless otherwise noted On single coil latching set polarity shown Index Mark on top of relay indicates position of pins 1 & 12 Pin Functions Bottom View 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2