50 Amp Power PCB Relay PTRE-OT

50 Amp Power PCB Relay
PTRE-OT
FEATURES







Most Popular Power PCB Relay Footprint - T90
50 Amp 240 VAC General Purpose UL Rating
2 HP 250 VAC Rating
UL Class F Insulation Standard
Meets UL 508 and UL 873 Spacing
Epoxy Sealed, Immersion Cleanable
RoHS Compliant
E160644 at 40°C
FACTORY RATINGS
1 Form A 1 Form B 1 Form C (SPDT)
(SPST-NO) (SPST-NC
NO
NC
Load Type
Voltage
Resistive
6,000 Cycles
240 VAC
30 VDC
50 A
40 A
50 A
40 A
Lamp
3,000 Cycles
240 VAC
TV-5
—
TV-5
—
Electric Ballast
6,000 Cycles
280 VAC
5A
—
5A
—
Motor Load
3,000 Cycles
250 VAC
2 HP
1.5 HP
2 HP
15 ms Max.
Release Time
10 ms Max
Insulation Resistance
1,000 MΩ min, at 500 VDC
Dielectric Strength
Cycles
Voltage
General Purpose
(Resistive)
10,000
50.000
240 VAC/30 VDC
240 VAC/30 VDC
1 Form C (SPDT)
Material
Initial Contact Resistance
Maximum Switching Voltage
Maximum Switching Current
Maximum Switching Power
35 A
30 A
1.5 HP
AgSnO2
110 VDC, 300 VAC
50 A
1,500 W, 12,000 VA
Mechanical
Electrical
Service Life
1 X 107 Operations
5 X 104 Operations
50 Hz 1,500 V 1 min. Between Contacts
Operating Temperature Range - 55°C to 100°C
Vibration Resistance
50 A
40 A
50 max @ 1 A, 6 VDC
Solderability
200
NC
CONTACT DATA
50 Hz 2,500 V 1 Min Between Coil and Contacts
Shock Resistance
NO
UL 508 and UL 873 Spacing - 3.18 mm Through Air, 6.36 mm Over
Surface.
CHARACTERISTIC
Operate Time
Load Type
235 ºC for 3 secs
Storage Temperature Range
- 40°C to 155°C
10 - 55 Hz Double Amplitude
Relative Humidity
85% (at 40°C)
Terminal Strength
10N
Weight
30 g,
Power Consumption
1.5 W
Material Compliant To
EU RoHS V2, EU REACH V3
m/s2,
11 ms
ORDERING INFORMATION
Example:
PTRE
-1C
-12
S
T
-OT5
-X
Model: PTRE-OT
Contact Form: 1A, 1B, or 1C
Coil Voltage: 3, 5, 6, 9, 12, 15, 18, 24, 48, 110
Configuration: Nil: Open Frame; C: Dust Cover;
S:(OT3 Only) Sealed E:(OT5 Only) Epoxy Sealed not Water Washable
Contact Material: Nil: AgCdO; T: AgSnOInO
Insulation Material: F: UL Class F
Mounting Type: OT2: Form 1A or 1B PCB&QC, OT3: Form 1C PCB&QC,
OT4: 1A or 1B Panel all QC with Mounting Fins, OT5: 1C Panel all QC with Mounting Fins
RoHS Compliant: -X
Pinout: A: Alternate Quick Connect Pinout
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
Dimensions are listed for reference purposes only.
PTRE Rev D 7/30/15
www.PickerComponents.com
e-mail: [email protected]
Specifications and Availability subject to change without notice.
1 of 2
PTRE - OT
PTRE-OT
COIL DATA
Coil Voltage
Rated
3
5
6
9
12
15
18
24
48
110
Max
3.9
6.5
7.8
11.7
15.6
19.5
23.4
31.2
62.4
143
Resistance
(Ohms ± 10%)
Must Operate
Voltage Max
(VDC)
Must Release
Voltage Min.
(VDC)
Coil
Power
(W)
6.0
16.7
24.0
54.0
96.0
150
216
384
1,536
8,067
2.25
3.75
4.50
6.75
9.00
10.25
13.50
18.00
36.00
82.50
0.3
0.5
0.6
0.9
1.2
1.5
1.8
2.4
4.8
11.0
1.5
NOTES:
The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is
not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria.
Dimensions are in mm, Inches are listed for reference only.
DIMENSIONS (mm/inches)
Knock off, on top corner, nib for ventilation after soldering and water wash.
T4 & T5
T2 & T3
5 mm SPDT 12 Amp
3.5 mm SPDT 12 Amp
Wiring Diagram (Bottom View)
Mounting (Bottom View)
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
Dimensions are listed for reference purposes only.
PTRE Rev D 7/30/15
www.PickerComponents.com
e-mail: [email protected]
Specifications and Availability subject to change without notice.
2 of 2