40 Amp Power PCB Relay PTRD-OT FEATURES E86876 Load Type General Purpose Resistive Motor LRA/FLA Voltage CONTACT DATA 1 Form B 1 Form A (SPDT-NC) 1 Form C NO NC 120 VAC 40 A 30 A 40 A 30 A 250 VAC 40 A 30 A 40 A 30 A 277 VAC 30 A 20 A 30 A 20 A 30 VDC 40 A 30 A 40 A 30 A 20 A 20 A 30 A 30 A 2 HP 1 HP 80 A/30 96 A/30 20 A 20 A 120 VAC 30 A 250 VAC 30 A 240 VAC 2 HP 120 VAC 1 HP 240 VAC 80 A/30 A 120 VAC 96 A/30 A —— —— —— —— Material Initial Contact Resistance Maximum Switching Voltage Maximum Switching Current Maximum Switching Power Mechanical Service Life Electrical —— —— —— —— CHARACTERISTIC Operate Time Release Time Insulation Resistance Dielectric Strength Most Popular Power PCB Relay Footprint - T90 40 Amp 250 VAC General Purpose UL Rating 2 HP 250 VAC Rating UL Class F Insulation Standard Gold Flashed Contacts Available Meets UL 508 and UL 873 Spacing Epoxy Sealed, Immersion Cleanable RoHS Compliant Less than 15 ms Less than 10 ms 1,000 MΩ min, at 500 VDC, 50% RH 50 Hz 2,500 V 1 Min Between Coil and Contacts 4,000 V without Pin 6 50 Hz 1,500 V 1 min. Between Contacts Shock Resistance 200 m/s, 11 ms Power Consumption 0.9 W, 0.6 W 110 VDC, 300 VAC 40 A 1,500 W, 12,000 VA 1 X 107 Operations 5 X 104 Operations CHARACTERISTIC Continued Vibration Resistance Terminal Strength Solderability Operating Temperature Range 10 - 55 Hz Double Amplitude Storage Temperature Range - 40°C to 155°C Relative Humidity 85% (at 40°C) Weight Material Compliant To 13.5 gr Approximately Example: PTRD -1C -12 S Model: PTRD (PTRD-OT) Contact Form: 1A, 1B, 1C Coil Voltage: 3, 5, 6, 9, 12, 15, 24, 48, 110 Enclosure: S: Sealed; E: Covered C: Dust Cover Coil Sensitivity: Nil: 0.9 W; 0.6: 0.6 W; Contact Material: Nil: AgCdO; T: AgSnO2 Mounting Type: T2: Form 1A PCB & QC; T3; Form 1C PCB & QC: T4: 1A Panel all QC; T5: 1C Panel all QC RoHS Compliant: -X Box Quantity: 600; Inner Box 300 -OT5 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 PTRD-OT 5/21/15 50 MΩ Max. @ 1 A, 6 VDC Meets UL 508 and UL 873 Spacing ‐ 3.18 mm Through Air, 6.36 mm Over Surface. ORDERING INFORMATION Dimensions are listed for reference purposes only. AgSnO2, AgSnO2 10N 235 ºC for 3 secs - 40°C to 125°C EU RoHS V2, EU REACH V3 -X www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 1 of 2 PTRH-DT PTRD-OT COIL DATA Coil Voltage Coil Power (W) Resistance (Ohms ± 10%) Coil Power (W) Must Operate Voltage Max (VDC) Rated Max 0.6 W 0.9 W 1.1 W 0.6 W & 0.9 W 1.1 W 3 5 6 9 12 15 18 24 28 48 110 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 36.4 62.4 143 15 42 60 135 240 375 540 960 1307 3840 20167 10 28 40 90 150 260 380 640 871 2560 13445 ————33 ——131 ————524 713 2095 ——- 2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 21.0 36.00 82.50 ————4.8 ——9.6 ————19.2 22.4 38.4 ——- Must Release Voltage Min (VDC) 0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 2.8 4.8 11.0 NOTES: The use of any coil voltage less that the rated voltage will compromise the operation of the relays. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. Pickup and release voltages are for test purposes only and are not to be used as design criteria. Dimensions are in mm, Inches are listed for reference only. DIMENSIONS (mm/inches) Knock off, on top corner, nib for ventilation after soldering and water wash. T2 & T3 T4 & T5 T2 & T3 T4 & T5 Wiring Diagram (Top View) Wiring Diagram (Bo om View) Wiring Diagram (Top View) Moun ng (Bo om View) 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PTRD-OT 5/21/15 www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 2 of 2