FEATURES PART NUMBER Input Voltage Maximum Trigger Current Maximum Output Currnet Maximum Output Voltage Minimum Output Voltage Zero Cross PCD210AC8 4-32 VDC 10 mA 10 Amps 250 VAC 50 VAC Y PCD215AC8 4-32 VDC 25 mA 15 Amps 250VAC 50 VAC Y PCD225AC8 4-32 VDC 25 mA 25 Amps 250 VAC 50 VAC Y PCD240AC8 4-32 VDC 25 mA 40 Amps 250 VAC 50 VAC Y PCD425AC8 4-32 VDC 25 mA 25 Amps 480 VAC 75 VAC Y PCD440AC8 4-32 VDC 25 mA 40 Amps 480 VAC 75 VAC Y PCD210-440 Rev A 6-6-02 PAGE 1 PCD PCD Absolute Maximum Ratings at 25 Degrees C Output Input Parameter Symbol Rating Unit IN 4-32 V DC 1 V DC 10, 15, 25, or 40 A rms 10x I T A 600 *See note 2 V 47 - 70 Hz Input signal voltage V Drop out voltage V do RMS on state current I T Peak one cycle surge current I surge Repetitive peak off state voltage V Operating frequency f Critical rate of rise on state current di/dt Load supply voltage V out 250 *See Note 2 Vrms AC Isolation voltage input to output V iso 4000 Vrms Operating temperature T opr -30 - 100 o stg -30 - 125 o sol 260 o Storage temperature T Soldering temperature 10 seconds T DRM A/ 50 S C C C Electrical Characteristics at 25 Degrees C Symbol Output Input Parameter Conditions Unit 4V DC MAX Pick up voltage V pu It=1Arms Input current I in Vin=4 - 32V 5 TO 12 mA 1.5V rms MAX 50 mArms MIN On state voltage V T It=1Arms Operating current I op Vout=240 Vrms Leakage current I leak Vout=240 Vrms Critical rate of rise of off state voltage dv/dt See Note 1 =7mA S 35 VAC MAX Zero cross voltage V ox Load voltage rating V out Minimum trigger current I FT Isolation resistance input to circuit R iso DC 500V 10 OHMS MIN Turn on time T on 60Hz AC 8.3 ms MAX Turn off time T off 60Hz AC 8.3 ms MAX Thermal resistance (between junction and case) I 3.5 TO 7 mArms 50 TO 200V/ in I T =50mArms MIN V DRM =600V Rth(j-c)I 50 TO 280VAC 25 mA MAX 10 1.3 oC/W NOTES: 1. Output (dv/dt) protection is provided on all models. They are designed to switch resistive or inductive loads to 0.2 power factor. The dv/dt rating is based on a source impedance of 50 ohms. 2. Model PCD425AC8-1 is rated 25 amps at 480 VAC. I surge is 250 amps and V DRM Is 1200 VOLTS. Vout Is 480 VAC. Model PCD440AC8-1 is rated 40 amps at 480 VAC. I surge is 400 amps and V DRM Is 1200 VOLTS. Vout Is 480 VAC. 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888) 997-3933 Fax: (972) 713-6272 email: [email protected] URL: pickercomponents.com PAGE 2 PCD PCD CHARACTERISTIC CURVES RMS On-state Current vs. Ambient Temperature Surge Current vs. Time Surge Current (A) f=60hZ o Tj=25 C RMS On State Current (A) 50 45 40 35 30 25 20 600 550 500 450 400 350 300 250 200 150 100 15 10 5 0 -30 0 10 20 30 40 50 60 70 80 90 100 110 0.01 0.1 1 10 o Ambient temperature,Ta C Time (SEC) Open Circuit Leak Current vs. Supply Voltage RMS On-state Current vs. Case Temperature o 10 50 9 45 RMS On-state Current (A) Open Circuit Leak Current (mA rms) Ta=25 C 8 7 6 5 4 3 2 1 0 40 80 120 160 200 40 35 30 25 20 15 10 5 0 -30 0 10 20 30 40 50 60 70 80 90 100 110 240 o Case temperature,Tc C Supply Voltage (Vrms) 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888) 997-3933 Fax: (972) 713-6272 email: [email protected] URL: pickercomponents.com PAGE 3 PCD PCD CHARACTERISTIC CURVES Input Current vs. Input Voltage 5 100 4.5 90 4 80 Input Current (mA) Input Voltage (V) Input Voltage vs. Ambient Temperature 3.5 3 2.5 2 1.5 1 70 60 50 40 30 20 10 0.5 0 0 -30 0 20 40 60 80 10 100 o 20 30 40 50 Input Voltage (VDC) Ambient Temperature Ta ( C) Dimensions in Inches 1 1.85 LOAD 2 25 AMP 250VAC PICKER CMPTS SOLID STATE RELAY TYPE PCD225AC8 INPUT 4-32 VDC 4- +3 2.275 LED .800 1.775 STANDARD SNAP ON SAFETY COVER 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888) 997-3933 Fax: (972) 713-6272 email: [email protected] URL: pickercomponents.com PAGE 4 60