Precision Hall Effect POSITION SENSORS Hall Effect Position Sensors Measurement Specialties has been known for many years as a leading producer of high reliability precision position sensors for rotary and linear motion sensing based upon potentiometer technology. In response to customer requests, we’ve invested R&D resources into engineering a line of ultra precise Hall Effect non-contact position sensors. These sensors are available in 1/2" (12.7 mm), 7/8" (22.23 mm) and 7/8" (22.23 mm) dual (double redundant) sizes with high temperature and custom versions. Measurement Specialties Hall Effect sensors convert energy from a magnetic field into an electrical signal, enabling their contact-less operation and yielding nearly unlimited life cycles. Superior 12 Bit Resolution & 0.1% Absolute Linearity Central to our mission in developing our new Hall Effect sensors was to maintain our niche as producer of precision, high reliability sensors. The result is a line of ultra precise, non-contact Hall Effect position sensors featuring absolute linearity of +/- 0.1%. These 12 bit resolution devices are qualified to RTCA/DO-160F aircraft standards and dramatically outperform competitive products, which are only capable of linearities ranging from +/- 0.5% to +/- 1%. Measurement Specialties achieves the precise linearity in their sensors through proprietary precision machining, chip-tuning capability and electronic testing processes. 2 Custom Application Specific Solutions Rarely does a 100% off-the-shelf position sensor satisfy the mechanical, electrical and/or power requirements of a sophisticated OEM design. Whether modifying an existing sensor design or working from a ”clean sheet“ approach, the resulting Measurement Specialties will be tailored to your exact application requirements and push the envelope of product performance. Measurement Specialties Hall Effect sensors offer a cost effective solution for many harsh environment applications involving temperature, vibration, moisture and dirt making them ideal for a range of military and aerospace, as well as commercial designs. Responsive Engineering & Customer Support We understand the need for speed in today’s fast paced product development world. Our engineers are prepared to either modify an existing sensor product or design a new ”clean sheet” solution within a timeframe that meets your requirements. Once a general design is agreed upon, we’ll conduct simulations to evaluate performance and produce a prototype for final evaluation. And following production release, our customer service group will work with you for a complete delivery program, including schedule sharing. Global Logistics Today more than ever, it is imperative suppliers be prepared to support their customers around the world. Measurement Specialties has created a network of sales offices, manufacturing plants and distribution facilities to support the world’s major markets. From field sales specialists to engineering and manufacturing to logistics, our key program development personnel are positioned around the world and poised to support our customers, regardless of the location. Grass Valley, CA World Class Quality Measurement Specialties’ Temperature Sensor Products are ISO9001:2000 certified and adhere to world class manufacturing techniques ensuring each customer receives the Six Sigma reliability they demand. This commitment to quality has produced a reputation for dependability and resulted in preferred supplier status at many industry leading OEMs. Guang Dong, China Flexible Manufacturing Our lead design and manufacturing center for all of our position sensor products is located in Grass Valley, CA. The facility produces all of our military and aerospace position sensors. To better serve our global customer base, we have established low cost manufacturing facilities in China and Mexico. These state-of-the-art plants complement our North American production capacity and give us great flexibility to meet customer requirements, including separation of our military and commercial manufacturing. Juarez, Mexico 3 1/2" [12.7 mm] Size 5 Diameter Hall Effect Precision Position Sensor H005 Series Part Number Output Temperature H005-1000-030 (A) H005-1000-03T (A) H005-1000-130 (A) H005-1000-13T (A) H005-1000-230 (A) H005-1000-23T (A) H005-1001-030 (C) H005-1001-130 (C) H005-1001-230 (C) Analog Analog Serial Serial *PWM *PWM Analog Serial *PWM -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 125°C -40° to 125°C Notes: * Pulse-width modulation (A) Aerospace - Qualified to RTCA/DO-160F (C) Commercial - Shaft un-sealed Environmental Characteristics Electrical Characteristics Electrical Angle: Increasing Function: Linearity: Power Rating @ 25°C: Resolution: Sampling Rate: Nominal Supply Voltage (Vdd): Nominal Supply Current (Idd): Output Options: Analog - Ratiometric: Digital - PWM: - Serial: Absolute Maximum Ratings: Reverse Voltage Protection: Maximum Supply Voltage (overvoltage): Positive Output Voltage: Output Current (lout): Reverse Output Voltage: Reverse Output Current: 1°-359°/Dead Zone: 1°-359° Either CW or CCW ±0.1% Absolute at 25°C ±0.3% Over full temperature range (Temperature customization available) 0.080 Watt Max. 12 Bit 600µs Standard or 200µs Digital High Speed Available 4.5 - 5.5 V 8.5 mA to 11 mA Standard, 13.5 mA to 16 mA Digital High Speed Rail to Rail 500 Hz (100-1,000 Hz Available) 3 Wire Protocol (14 bit resolution) -10V +20V +10V ±30 mA -0.3V -50 mA Mechanical Characteristics Rotation: Torque - Starting/Running: Aerospace - Sealed Commercial - Un-sealed Axial Play: 4 Rotational Life: > 100 Million Revolutions (Standard bearing life Custom Available) Electrical Life: > 2,500 Hours @ 150°C Storage Temperature: -40°C to +150°C* Operating Temperature: -40°C to +125°C (150ºC opt.)* Mechanical Shock: Sawtooth 20G Peak Electrostatic Discharge: 15kV (Human Body Model) Vibration: High Frequency, Swept 3 to 2,000 Hz, 30G Peak Magnetic Field Emission: At 30 CM, Less than 1° Effect on Compass EMI Immunity: 120 A-m Magnetic Field and 5,400 V-m Electric Field RF Emissions: Zero Emission, Swept 0.15 MHz to 6,000 MHz * Exposure to maximum rated conditions for extended periods may affect device reliability. Materials of Construction (RoHS Compliant) Housing: Shaft: Bearings: Lead Wires: Continuous 360° < 2.0 Oz.-In. < 0.05 Oz.-In. < 0.001" [0.025 mm] Printed Circuit Board: Terminals/Connectors Available: Anodized Aluminum Passivated Centerless Ground Stainless Steel Precision Miniature Ball Teflon Type ET (Optional AWG, Lead Lengths and Terminations) HR370 High TG (FR-5 Available) JST, Molex Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 1/2" [12.7 mm] Size 5 Diameter Hall Effect Precision Position Sensor H005 Series Teflon Type ET Lead Wires Printed Circuit Board Anodized Aluminum Housing Capacitors O-Ring Retaining Ring Magnet Passivated Centerless Ground Stainless Steel Shaft Shim Washer Hall Effect Integrated Circuit Ultem Cover Precision Miniature Ball Bearings (2) .67 [16.9] .124 [3.15] .062 [1.57] 0 .062 [1.57] .500 [12.70] .500 DIA. [12.70] .1248 DIA. .1246 [3.170 3.165] .438 DIA. [11.11] Dimensions in Inches [mm] Available Options • Lead wires, lead lengths and terminations available. • HR370 High TG Printed Circuit Board available. • JST and Molex terminals/connectors available. • Special linearities, such as electrical function and various angles. • Special shaft configurations (screwdriver, slotted, thru-hole and custom flats). • Special flange mounting configurations available. • Special gear and mounting frame configurations available. See pages 10-11 for more detail on custom options Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 5 7/8" [22.23 mm] Size 9 Diameter Single Output Hall Effect Precision Position Sensor H009 Series Single Output Part Number Output Temperature H009-1000-030 (A) H009-1000-03T (A) H009-1000-130 (A) H009-1000-13T (A) H009-1000-230 (A) H009-1000-23T (A) H009-1001-030 (C) H009-1001-130 (C) H009-1001-230 (C) Analog Analog Serial Serial *PWM *PWM Analog Serial *PWM -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 125°C -40° to 125°C Notes: * Pulse-width modulation (A) Aerospace - Qualified to RTCA/DO-160F (C) Commercial - Shaft un-sealed Electrical Characteristics Environmental Characteristics Electrical Angle: Increasing Function: Linearity: Rotational Life: > 100 Million Revolutions (Standard bearing life Custom Available) Power Rating @ 25°C: Resolution: Sampling Rate: Nominal Supply Voltage (Vdd): Nominal Supply Current (Idd): Output Options: Analog - Ratiometric: Digital - PWM: - Serial: Absolute Maximum Ratings: Reverse Voltage Protection: Maximum Supply Voltage (overvoltage): Positive Output Voltage: Output Current (lout): Reverse Output Voltage: Reverse Output Current: 1°-359°/Dead Zone: 1°-359° Either CW or CCW ±0.1% Absolute at 25°C ±0.3% Over full temperature range (Temperature customization available) 0.080 Watt Max. 12 Bit 600µs Standard or 200µs Digital High Speed Available 4.5 - 5.5 V 8.5 mA to 11 mA Standard, 13.5 mA to 16 mA Digital High Speed > 2,500 Hours @ 150°C -40°C to +150°C* Operating Temperature: -40°C to +125°C (150ºC opt.)* Mechanical Shock: Sawtooth 20G Peak Electrostatic Discharge: 15kV (Human Body Model) Vibration: High Frequency, Swept 3 to 2,000 Hz, 30G Peak Magnetic Field Emission: At 30 CM, Less than 1° Effect on Compass EMI Immunity: Rail to Rail 500 Hz (100-1,000 Hz Available) 3 Wire Protocol (14 bit resolution) 120 A-m Magnetic Field and 5,400 V-m Electric Field RF Emissions: Zero Emission, Swept 0.15 MHz to 6,000 MHz -10V * Exposure to maximum rated conditions for extended periods may affect device reliability. +20V +10V ±30 mA -0.3V -50 mA Materials of Construction (RoHS Compliant) Mechanical Characteristics Rotation: Torque - Starting/Running: Aerospace - Sealed Commercial - Un-sealed Axial Play: Electrical Life: Storage Temperature: Continuous 360° < 2.0 Oz.-In. < 0.05 Oz.-In. < 0.001" [0.025 mm] Housing: Shaft: Bearings: Lead Wires: Printed Circuit Board: Terminals/Connectors Available: 6 Anodized Aluminum Passivated Centerless Ground Stainless Steel Precision Miniature Ball Teflon Type ET (Optional AWG, Lead Lengths and Terminations) HR370 High TG (FR-5 Available) JST, Molex Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 7/8" [22.23 mm] Size 9 Diameter Single Output Hall Effect Precision Position Sensor H009 Series Single Output Anodized Aluminum Cover Teflon Type ET Lead Wires Precision Miniature Ball Bearings (2) Anodized Aluminum Housing Passivated Centerless Magnet Ground Stainless Steel Shaft Hall Effect Integrated Circuit Capacitors Retaining Ring Shim Washer Printed Circuit Board O-Ring .67 [17] .124 [3.15] .062 [1.57] 0 .062 [1.57] .1248 .500 .1246 DIA. [12.70] [3.170 3.165] .7500 DIA. .7495 [19.05 19.04] .873 DIA. [22.19] Dimensions in Inches [mm] Available Options • Lead wires, lead lengths and terminations available. • HR370 High TG Printed Circuit Board available. • JST and Molex terminals/connectors available. • Special linearities, such as electrical function and various angles. • Special shaft configurations (screwdriver, slotted, thru-hole and custom flats). • Special flange mounting configurations available. • Special gear and mounting frame configurations available. See pages 10-11 for more detail on custom options Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 7 7/8" [22.23 mm] Size 9 Diameter Dual Output Hall Effect Precision Position Sensor H009 Series Dual Output Part Number Output Temperature H009-1200-030 (A) H009-1200-03T (A) H009-1200-130 (A) H009-1200-13T (A) H009-1200-230 (A) H009-1200-23T (A) H009-1201-030 (C) H009-1201-130 (C) H009-1201-230 (C) Analog Analog Serial Serial *PWM *PWM Analog Serial *PWM -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 150°C -40° to 125°C -40° to 125°C -40° to 125°C Notes: * Pulse-width modulation (A) Aerospace - Qualified to RTCA/DO-160F (C) Commercial - Shaft un-sealed Electrical Characteristics Environmental Characteristics Electrical Angle: Increasing Function: Linearity: 1°-359°/Dead Zone: 1°-359° Either CW or CCW ±0.2% Absolute at 25°C ±0.4% Over full temperature range (Temperature customization available) ±0.3% 0.080 Watt Max. 12 Bit 600µs Standard or 200µs Digital High Speed Available 4.5 - 5.5 V 8.5 mA to 11 mA Standard, 13.5 mA to 16 mA Digital High Speed Rotational Life: > 100 Million Revolutions (Standard bearing life Custom Available) Rail to Rail 500 Hz (100-1,000 Hz Available) 3 Wire Protocol (14 bit resolution) Tracking: Power Rating @ 25°C: Resolution: Sampling Rate: Nominal Supply Voltage (Vdd): Nominal Supply Current (Idd): Output Options: Analog - Ratiometric: Digital - PWM: - Serial: Absolute Maximum Ratings: Reverse Voltage Protection: Maximum Supply Voltage (overvoltage): Positive Output Voltage: Output Current (lout): Reverse Output Voltage: Reverse Output Current: -10V +20V +10V ±30 mA -0.3V -50 mA Mechanical Characteristics Rotation: Torque - Starting/Running: Aerospace - Sealed Commercial - Un-sealed Axial Play: 8 Continuous 360° < 2.0 Oz.-In. < 0.05 Oz.-In. < 0.001" [0.025 mm] Electrical Life: > 2,500 Hours @ 150°C Storage Temperature: -40°C to +150°C* Operating Temperature: -40°C to +125°C (150ºC opt.)* Mechanical Shock: Sawtooth 20G Peak Electrostatic Discharge: 15kV (Human Body Model) Vibration: High Frequency, Swept 3 to 2,000 Hz, 30G Peak Magnetic Field Emission: At 30 CM, Less than 1° Effect on Compass EMI Immunity: 120 A-m Magnetic Field and 5,400 V-m Electric Field RF Emissions: Zero Emission, Swept 0.15 MHz to 6,000 MHz * Exposure to maximum rated conditions for extended periods may affect device reliability. Materials of Construction (RoHS Compliant) Housing: Shaft: Bearings: Lead Wires: Printed Circuit Board: Terminals/Connectors Available: Anodized Aluminum Passivated Centerless Ground Stainless Steel Precision Miniature Ball Teflon Type ET (Optional AWG, Lead Lengths and Terminations) HR370 High TG (FR-5 Available) JST, Molex Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 7/8" [22.23 mm] Size 9 Diameter Dual Output Hall Effect Precision Position Sensor H009-1200 Series Dual Output Teflon Type ET Lead Wires (2) Precision Miniature Ball Bearings (2) Anodized Aluminum Housing Passivated Centerless Ground Stainless Steel Shaft Anodized Aluminum Cover Hall Effect Integrated Circuit Magnet Retaining Ring Shim Washer Capacitors O-Ring 1.03 [26.1] .124 [3.15] 0 Printed Circuit Board .062 [1.57] .500 [12.70] .1248 DIA. .1246 [3.170 3.165] .7500 DIA. .7495 [19.05 19.04] .873 DIA. [22.19] Dimensions in Inches [mm] Available Options • Lead wires, lead lengths and terminations available. • HR370 High TG Printed Circuit Board available. • JST and Molex terminals/connectors available. • Special linearities, such as electrical function and various angles. • Special shaft configurations (screwdriver, slotted, thru-hole and custom flats). • Special flange mounting configurations available. • Special gear and mounting frame configurations available. See pages 10-11 for more detail on custom options Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 9 Hall Effect Position Sensors Custom Mounting Options Special Pilots and Shrouds Flanges and Mounting Holes Threaded Face Flats Thru Holes Knurled/Spline Split Shaft w/Index Cross Pin Special Diameter/ Custom Lengths Hall Effect Position Sensors Custom Shaft Options 10 Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com Hall Effect Position Sensors Hall Effect Position Sensors Custom Termination Options Custom Connector Options Potted Lead Exits - Wire type, color gauge - custom exit locations Hall Effect Position Sensors Custom Terminal Options Radial Turret Rear Terminal Special Locations Plated Solder Lugs Hall Effect Position Sensors Custom High Strain Relief Options Available Options • Special Functions • Custom Electrical Angles • Log Taper • Mechanical/Electrical Index or Phasing • Multiple Turns and Counters • Dual Resolution Output High Strain Relief Designs Position Sensor Products • 424 Crown Point Circle, Grass Valley, CA 95945 • (530) 273-4608 • Fax: (530) 273-0769 • precisionsensors.meas-spec.com 11 Temperature Sensor Products precisionsensors.meas-spec.com 1028 Graphite Road, St. Marys, PA 15857 Ph: 814.834.1541 Fax: 814.834.1556 www.meas-spec.com 8-7-13