Pi Insertion Loss Typical SMT Applications 100 90 SSM & RSM Series 70 SSM Insertion Loss (dB) Surface Mount Low Pass Filters 80 Pi Input * See note 4000 2000 1500 500 100 60 pf pf pf pf pf 50 40 30 20 Output 10 0 0.01 Ground 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 100 RSM * See note 4000 2000 1500 500 100 80 70 60 pf pf pf pf pf 50 40 30 20 10 0 0.01 0.1 1 10 Frequency (MHz) 100 * Capacitance values for insertion loss curves are displayed left to right in the order shown. SSM .026 ± .014 (0.65 ± 0.35) Electrodes .026 ± .014 (0.65 ± 0.35) Pi Input .083 ± .004 (2.1 ± 0.1) Output Ground Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 MΩ Terminations. . . . . . . . . . . . Silver Ni-Tin plated Soldering Conditions . . . . . . . . . . . . . Max. 250°C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or Tape and Reel Note: Insertion loss shown for the following RSM values only: 152P 402Z 1000 3000 .02 (0.5) Min. .113 (2.87) .315 (8.0) Max. .02 (0.5) Min. .02R Max. (0.5) (4 plcs) RSM .315 (8.00) Max. .083±.004 (2.1 ± 1.0) .020 (.500) Min. .012/.040 (0.3/1.0) NI/SN OVER AG PLATED TUBE 0.232 (5.90) ± 0.26 .113 (2.58) ±.014 (.35) Surface Mount Low Pass Filters Note: Insertion loss shown for the following SSM values* only: 101Z 501P 202P *Additional IL charts available by request. 90 Insertion Loss (dB) Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 MΩ Terminations. . . . . . . . . . . . Silver Plated Soldering Conditions . . . . . . . . . . . . . Max. 250°C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or Tape and Reel 0.020 (.500) Min. .012/.040 (0.3/1.0) Dimensions in inches (mm) SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.specemc.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 49 Surface Mount Low Pass Filters SSM & RSM Series SSM & RSM Ordering Information Example: SSM1-101Z-05T SSM 1 Style Circuit Configuration 1 - Pi SSM (Square) RSM (Round) - ✝ Also available through Spectrum Control’s authorized distributors. € Also available through Spectrum Control’s authorized European distributors/agents. ✝ SSM1-152P-05-T1 € 101Z Capacitance Code Value Tolerance 101Z 100 pF +80/-20% 501P 500 pF +100/-0% 152P 1500 pF +100/-0% 202P 2000 pF +100/-0% 402E 4000 pF ±25 402Z 4000 pF +80/-20% SSM/RSM Tape and Reel Packaging .098 (2.50) Surface Mount Low Pass Filters .013 (0.33) .059 (1.50) .157 (4.00) .079 (2.00) .295 (7.50) 05 T Current Rating 05 - 5 Amps 10 - 10 Amps Packaging 1 Tape and Reel T - Tape and reel packaging B - Bulk packaging 1 - 1,000 pieces 6 - 6,000 pieces Note: Tape and reel packaging 1,000 pieces (7") and 6,000 pieces (13") SSM Recommended Board Pattern .043 (1.1) .043 (1.1) .069 (1.75) .093 (2.36) Min. .315 (8.00) .630 (16.0) .157 (4.00) 50 - .059 (1.50) .102 (2.6) Dimensions in inches (mm) SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.specemc.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58