Pi Insertion Loss Typical SMT Applications 100 90 SSM Input Pi Insertion Loss (dB) Surface Mount Low Pass Filters SSM & RSM Series * See note 4000 2500 1500 1000 820 470 130 100 68 80 70 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 Output 10 0 0.01 Ground 0.1 1 10 Frequency (MHz) 100 1000 3000 Shielded or Partition Applications 100 Note: Insertion loss shown for the following SSM values* only: 101Z 501P 202P *Additional IL charts available by request. RSM Input Pi 90 * See note 4000 2500 1500 1000 820 470 135 100 68 80 Insertion Loss (dB) Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 MΩ Terminations. . . . . . . . . . . . Silver Ni-Tin plated Soldering Conditions . . . . . . . . . . . . . Max. 250°C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or tape and reel 70 60 50 40 30 pf pf pf pf pf pf pf pf pf 20 10 0 0.01 0.1 1 10 Frequency (MHz) 100 * Capacitance values for insertion loss curves are displayed left to right in the order shown. SSM Electrodes .026 ± .014 (0.65 ± 0.35) .026 ± .014 (0.65 ± 0.35) .083 ± .004 (2.1 ± 0.1) Output Ground Working Voltage . . . . . . . . . 100 VDC Test Voltage . . . . . . . . . . . . 250 VDC Current . . . . . . . . . . . . . . . Max. 10 Amps Insulation Resistance. . . . . . . . . . . . . . Min. 104 MΩ Terminations. . . . . . . . . . . . Silver Ni-Tin plated Soldering Conditions . . . . . . . . . . . . . Max. 250°C -5 sec. Marking. . . . . . . . . . . . . . . None Packaging. . . . . . . . . . . . . . Bulk or tape and reel Note: Insertion loss shown for the following RSM values only: 152P 402Z 1000 3000 .02 (0.5) min. .113 (2.87) .315 (8.0) max. .02 (0.5) min. .02R max. (0.5) (4 plcs) RSM .315 (8.00) Max. .083±.004 (2.1 ± 1.0) .020 (.500) Min. .012/.040 (0.3/1.0) NI/SN OVER AG PLATED TUBE 0.232 (5.90) ± 0.26 .113 (2.58) ±.014 (.35) 0.020 (.500) Min. .012/.040 (0.3/1.0) Dimensions in inches (mm) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 SM12 Surface Mount Low Pass Filters SSM & RSM Series SSM & RSM Ordering Information Example: SSM1-101Z-05T SSM Style SSM (Square) RSM (Round) 1 Circuit Configuration 1 - Pi - 101Z Capacitance Code ✝ Also available through API’s authorized distributors. € Also available through API’s authorized European distributors/agents. ✝ SSM1-152P-05-T1 € 101Z 100 pF Value Tolerance 501P 500 pF +100/-0% 152P 1500 pF +100/-0% 202P 2000 pF +100/-0% 402E 4000 pF ±25 402Z 4000 pF +80/-20% SSM/RSM Tape and Reel Packaging .098 (2.50) .013 (0.33) .059 (1.50) .157 (4.00) .079 (2.00) - .295 (7.50) 05 Current Rating 05 - 5 Amps 10 - 10 Amps +80/-20% T Packaging 1 T - Tape and reel packaging B - Bulk packaging Tape and Reel 1 - 1,000 pieces 6 - 6,000 pieces Note: Tape and reel packaging 1,000 pieces (7") and 6,000 pieces (13") SSM Recommended Board Pattern .043 (1.1) .043 (1.1) .069 (1.75) .093 (2.36) Min. .315 (8.00) .630 (16.0) .157 (4.00) .059 (1.50) .102 (2.6) Dimensions in inches (mm) API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 SM13