63 MHz SAW Filter 0.4 MHz Bandwidth Part Number: SF0063CN02271T DESCRIPTION • • • 63 MHz SAW bandpass filter with 0.4 MHz bandwidth for Wireless Data applications. 22.1 x 12.7 mm DIP package. RoHS compliant. TYPICAL PERFORMANCE Amp 10 dB/div Amp 1 dB/div Phase 10 deg/div Delay 200 ns/div Center = 63 MHz, 1 MHz/div (12.5 kHz incr) S11 (58-68 MHz) S22 (58-68 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0063CN02271T Rev C 9-Feb-2010 ECN 36650 Page 1 of 3 63 MHz SAW Filter 0.4 MHz Bandwidth Part Number: SF0063CN02271T SPECIFICATION Parameter Min Typ Max - 63.00 - - 13.1 15.0 dB Absolute Delay - 2.82 - us 3 dB Bandwidth 0.40 0.45 - MHz 55 dB Bandwidth - 1.56 1.60 MHz Phase Linearity (in 3 dB BW) - 2 3 deg p-p Group Delay Ripple (Fc+/-0.2 MHz) - 170 - ns p-p Center Frequency (Fc) 1 Insertion Loss Passband Ripple MHz - 1.5 2.0 Triple Transit Suppression 30 35 - Feed Through 40 45 - 50 - Source and Load Impedance Spurious Rejection (0.3 – 62.2 MHz) 55 58 Spurious Rejection (63.8 – 100 MHz) 55 58 - 25 Ambient Temperature Note: Units dB p-p dB dB Ω dB dB °C - 1. Defined as the average of the lower and upper 3 dB frequencies. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -55 -55 - 85 70 15 Units ˚C ˚C dBm MATCHING CIRCUIT 1 8 Input 50 Ω Single-ended Output 50 Ω Single-ended 14 7 GND GND Typical component values: Ls1 = Cp2 = 330 51 nH pF Ls2 = 470 nH Notes: 1. Recommend use of 2% tolerance matching components. Typical inductor Q=40. 2. Component values may change depending on board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0063CN02271T Rev C 9-Feb-2010 ECN 36650 Page 2 of 3 63 MHz SAW Filter 0.4 MHz Bandwidth Part Number: SF0063CN02271T PACKAGE OUTLINE Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pin Configuration: Input: 1 Input return: 14 Output: 8 Output return: 7 Ground: 2,9 MARKING SMI CN02271T ∆ YYDDD Date Code (YY=year, DDD=day) Pin 1 indicator symbol (ESD) ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0063CN02271T Rev C 9-Feb-2010 ECN 36650 Page 3 of 3