120 MHz SAW Filter 42 MHz Bandwidth Part Number SF0120BA03083S DESCRIPTION • • • 120 MHz SAW bandpass filter with 42 MHz bandwidth. 13.3 x 6.5 mm ceramic LCC package, 12 pads. RoHS compliant. TYPICAL PERFORMANCE Amp 10 dB/div Amp 1 dB/div Phase 14 deg/div Delay 150 ns/div Center = 120 MHz, 12 MHz/div (150 kHz incr) S11 (60-180 MHz) S22 (60-180 MHz) Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSD0120BA03083S Rev - 8-Dec-10 ECN 355-MAR Page 1 of 3 120 MHz SAW Filter 42 MHz Bandwidth Part Number SF0120BA03083S SPECIFICATION Parameter Center Frequency, FC 1 Insertion Loss at Fc Lower 1 dB Frequency 2 Upper 1 dB Frequency 2 Lower 40 dB Frequency 2 Upper 40 dB Frequency 2 Passband Amplitude Variation 3 Passband Amplitude Variation 4 Passband Amplitude Variation 5 Phase Deviation from Linear 4 Group Delay Deviation 4 Absolute Delay System Source and Load Impedance Ambient Temperature Notes: 1. 2. 3. 4. 5. Min 141 92 - Typ 120 15.7 96.7 142.1 93.4 146.7 0.5 0.5 0.5 5 40 0.8 50 25 Max 18 99 148 1.2 1.7 1.5 14 140 1.2 - Units MHz dB MHz MHz MHz MHz dB p-p dB p-p dB p-p deg pp ns p-p us Ω ˚C Reference frequency. Computed as mean of the 3 dB frequencies. All dB values are referenced to the insertion loss value. Evaluated over 100 to 140 MHz Evaluated over 99 to 141 MHz. Evaluated over 99 to 140 MHz. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -40 0 - 85 85 10 Units ˚C ˚C dBm MATCHING CIRCUIT 11 Input 50 Ω Single ended 5 All other pads Output 50 Ω Single ended Lp1 = 82 nH, Ls1 = 68 nH, Lp2 = 68 nH, Cp2 = 27 pF Notes: • Recommend 2% or better tolerance matching components. Typical inductor Q=40. • Optimum values may change depending on board layout. Values shown are intended as a guide only. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSD0120BA03083S Rev - 8-Dec-10 ECN 355-MAR Page 2 of 3 120 MHz SAW Filter 42 MHz Bandwidth Part Number SF0120BA03083S PACKAGE OUTLINE & MARKING SUGGESTED FOORPRINT ESD Indicator (Pad 10) DATE CODE (YY=YEAR, DDD=DAY) ∆ SMI BA03083S YYDDD Units: mm Tolerances are typically ±0.15 mm except where indicated. Pad Configuration: Input: 11 Output: 5 Ground: All other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSD0120BA03083S Rev - 8-Dec-10 ECN 355-MAR Page 3 of 3