APPREG Series Rad-Hard Temperature Stable Positive Voltage Regulators/References Adjustable and Fixed Temperature Stable Regulators and References Manufactured in a Certified Class-K Facility Features • Rad-Hard to 300 krad TID (note 1) • Single Event Latch-up (SEL) immune (LET>87 MeV/mg/cm2) • Wide Input/Output Voltage Differential: 40V • K-level screening • Excellent Temperature Stability • For units with a shutdown function, see APPREG2 series datasheet The APPREG Series are space qualified, wide-input range positive linear voltage regulators designed for military and space flight applications. Packaged in a hermetic TO-257 package, the regulators provide up to 1.5A of output current over their full input voltage range as per specification (see table 1). The device also features internal thermal shutdown and output current-limiting circuitry. This series is an excellent choice for applications requiring high radiation tolerance, low noise and high power supply rejection ratios. These voltage regulators are provided in both adjustable and fixed output voltage configurations. The adjustable version requires only one external resistor to program the output. Absolute Maximum Ratings (Exceeding maximum ratings may damage the device. Symbol Parameter Value Unit Vin- Vo DC input- Output Differential 40 V Io Output Current 1.5 A Pd Power Dissipation Tcase=25oC 50 W Rthjc Thermal Resistance, Junction to Case 2.5 oC/W Tstg Storage Temperature -65 to +150 oC Top Operating Temperature Range -55 to +125 oC 175 oC 5 G 265 oC Tj Maximum Junction Temperature W Package weight Tsold Maximum Soldering Temperature, 10sec Radiation Ratings Symbol Parameter Value Unit TID Minimum in Spec Total Dose Performance (Dose Rate: 50-300 rad(Si)/s) > 300 krads (Si) ELDRS Minimum in Spec Low Dose Rate Performance (Dose Rate ≤ 10 mRad (Si)/s) > 50 krads (Si) SET Linear Energy Threshold, Single Event Transients < 100mV, (note 5) > 15 MeV/mg/cm2 SEL/SEB Single-Event Latch-up Free linear Energy Transfer Threshold > 87 MeV/mg/cm2 Rev Date: 12/19/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] APPREG Series Electrical Characteristics (@ Ta= -55oC to +125oC Unless Otherwise Specified) Pre-RadiationSymbol Parameter Test Conditions VREF Reference Voltage Accuracy (7) VLINE Line Regulation (2) (7) Vload Load Regulation Min Typical (9) Vdiff = 3.25 to 35V, IL =10mA (2) (8) Units Max V Vout= Vref, IL =10mA, 3.0V ≤ Vdiff ≤ 40V +/-0.02 %/V Vdiff= 6.75V, 10mA ≤ IL ≤ 1.25 A +/-1.5 % Vdiff= 3.0V – 39V, ILoad= 10mA 100 μA IADJ Adjust-Pin Current Vload (7) ΔIADJ Adjust-Pin Current Change (8) Vdiff= 3.0V – 40V, IL=10mA, 25oC -5 5 μA ΔIADJ Adjust-Pin Current Change (8) Vdiff= 3.0V – 40V, IL=10mA -6 6 μA IOUT Output Current (7) Vin (Min) Minimum I/O Differential (4) (8) Post-Radiation (Ta= 25 oC) Io ≤ 1.25 A 1.25 A 3.0 V Notes (1) (3) Symbol Parameter Test Conditions VREF Reference Voltage Change IADJ Adjust-Pin Current Change Max Units Vdiff = 40V, IL =10mA +/- 50 mV Vdiff= 3-35V, ILoad= 10mA +/- 5 μA Min Typical Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. At the time of publication of this datasheet, API Technologies/Marlborough did not have a DLA certified radiation hardness assurance program. Load & Line regulation are measured at constant (Tj) junction temperature using a low duty cycle pulse. Changes in output voltage due to heating effects must be evaluated separately. TID radiation testing is performed per MIL-STD-883, method 1019. Internal SOA protection limits output current with high input voltage. Minimum exposure where parameters are guaranteed to stay within spec. Vin ≥ 9V and COUT ≥ 44 uF VDIFF ≤ 39V @ 125oC At 125oC, a 1.5A output requires an I/O differential of ≥ 6.75 V. Please see Table 1 for values and limits of the various versions. Screening Options Screening Levels Tests EM H Engineering Models Mil-Std-883Method K Compliant- MIL-PRF-38534 100 % Non-Destruct Wire-Pull N/A Sample 100% 2023 Pre-Cap Visual N/A N/A 100% 2017 Temperature Cycle N/A 100% 100% 1010 Constant Acceleration N/A 100% 100% 2001 PIND N/A N/A 100% 2020 Pre-Burn-In Electrical (Ta= 25C) N/A 100% 100% Burn-In N/A 100% (240 Hours) 100% (320 Hours) Final Electrical 100% (25C) 100% 100% 1015 Hermeticity (Fine & Gross Leak) N/A 100% 100% 1014 X-Ray N/A N/A 100% 2012 External Visual Sample 100% 100% 2009 Rev Date: 12/19/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] APPREG Series Table 1 – Product Functionality (-55oC = Ta ≤ 125oC, VIN - VO = 5V, IO = 0.5 A UOS) APPREG Series Model Options Protection Resistor (1) -RSNONN No -RSRESR Yes -TCADJN No -TCADJR Yes -TC7.5N No -TC7.5R Yes -TC10.N No -TC10.R Yes -TC15.N No -TC15.R Vout Fixed/ Remote Variable Sense Output 1.25 to 37 Variable Yes 7.5 to 37 Variable Yes Ref/output Voltages @ 25o C Ref/output Tolerance @ 25o C (2) Output Change -55-125oC Ref = 1.25 V +/- 12 mV(3) +/- 25 mV(3) @ VO = 6.25 V (See figure 2 & 6) Ref = 7.45 V (See figure 3 & 6) 7.5 V Fixed Yes Output = 7.50 V 10.0 V Fixed Yes Output = 10.0 V 15.0 V Fixed Yes Output = 15.0 V Yes (See figure 4, 5, 6) (See figure 4, 5, 6) (See figure 4, 5, 6) Operating Input Voltage (Vin-Vout must be 5 V or higher) 4.25 to 40 V +/- 35 mV @ VO = 7.5 V +/- 330 mV 11 to 40 V +/- 50 mV @ VO = 37 V +/- 10 mV(2) +/- 35 mV @ VO = 7.5 V 11 to 40 V +/- 10 mV(2) +/- 40 mV @ VO = 10 V 13 to 40 V +/- 10 mV(2) +/- 50 mV @ VO = 15 V 18 to 40 V Notes: 1. Protection resistor is 10 Ohms and is internally connected between the Output pin and the Sense pin to prevent a high Output Voltage excursion should the external remote sense connection be severed. 2. For fixed output versions, output tolerance is adjustable to zero with one external resistor. 3. Both Output Accuracy and Temperature Drift are specified as ± 25 mV Max. However, the sum of the two will not exceed +/- 25 mV (Applies to the non-TC versions only). Ordering Information APPREG K 6 -XXYYYZ Model Options Package Type See Table 1 6 = 6 pin TO-257 Screening Level K = Class-K Compliant H = Class-H Compliant E = Engineering Model Example: 15 Volt Fixed Output Model with Protection Resistor, Class K: Model # APPREG-TC15.R6K Rev Date: 12/19/2014 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] APPREG Series Figure 1 – APPREG Package Outline Drawing* Pin No Pin Name Pin Description 1 COMMON I/O Common 2 SENSE Remote Sense 3 VOUT Output Voltage 4 VIN Input Voltage 5 COMP Compensation 6 TRIM Output Voltage Trim Case No Connection- Isolated *Consult Factory for additional lead bend options. Figure 2 – Interconnections for APPREG-RS (Remote Sense) Series APPREG-RS Series Figure 3 – Interconnections for APPREG-TC-Adj (Temperature Compensated Adjustable Output) Series APPREG-TC-Adj Series Rev Date: 12/19/2014 © API Technologies Corp. Proprietary Information Page # 4 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] APPREG Series Figure 4 – Interconnections for APPREG-TC (Temperature Compensated) Fixed Output Voltage Series APPREG-TC Series Figure 5 – Interconnections for APPREG-TC (Temperature Compensated) Fixed Output Voltage Series (with Output Trim Method) APPREG-TC Series Rev Date: 12/19/2014 © API Technologies Corp. Proprietary Information Page # 5 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]