1960 MHz SAW Delay Line 60 MHz Bandwidth Part Number

1960 MHz SAW Delay Line
60 MHz Bandwidth
Part Number SD1960BA03204S
DESCRIPTION
•
•
•
1960 MHz SAW delay line with minimum 60 MHz bandwidth.
22.1 x 12.7 mm 14-6 pin DIP package.
RoHS compliant.
TYPICAL PERFORMANCE
Amp
10 dB/div
Amp
1 dB/div
Phase
10 deg/div
Delay
100 ns/div
Center = 1960 MHz, 30 MHz/div (187.5 kHz incr)
S11 (1860-2060 MHz)
S22 (1860-2060 MHz)
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSD1960BA03204S Rev A 6-Apr-2010
ECN 36650 Page 1 of 3
1960 MHz SAW Delay Line
60 MHz Bandwidth
Part Number SD1960BA03204S
SPECIFICATION
Parameter
Center Frequency, FC 1
Minimum Insertion Loss
Passband Ripple (any 1.25 MHz channel
between 1930-1990 MHz)
Phase Ripple (1930-1990 MHz)
Group Delay Deviation (1930-1990 MHz)
Absolute Delay
3 dB bandwidth 2
Source and Load Impedance
Temperature Coefficient of Frequency
Ambient Temperature
Notes:
Min
-
Typ
1960
39.7
Max
43
Units
MHz
dB
-
0.45
0.6
dB p-p
1.9
60
5
30
2.05
86
50
-86
25
8
50
2.1
-
deg p-p
ns p-p
us
MHz
ohms
ppm/˚C
˚C
-
-
1. Reference frequency. Computed as mean of the 3 dB frequencies.
2. All dB values are referenced to the insertion loss value.
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating Temperature Range
Input Power Level
Min
Max
-40
0
-
85
80
10
Units
˚C
˚C
dBm
MATCHING CIRCUIT
1
8
Input
50 Ω
Single ended
Output
50 Ω
Single ended
GND
All other pins
GND
Notes:
• Matching components are not required.
• Delay line is to be operated in a 50 ohm single-ended system.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSD1960BA03204S Rev A 6-Apr-2010
ECN 36650 Page 2 of 3
1960 MHz SAW Delay Line
60 MHz Bandwidth
Part Number SD1960BA03204S
PACKAGE OUTLINE
Units: mm
Tolerances are typically ±0.15 mm
except where indicated.
Pin Configuration:
Input:
1
Output:
8
Ground:
All other pins
MARKING
Model Number
Date Code (YY=year, DDD=day)
Symbol denotes pin 1
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSD1960BA03204S Rev A 6-Apr-2010
ECN 36650 Page 3 of 3