SPECTRUM SF1500BA03201S

1500 MHz SAW Filter
6 MHz Bandwidth
Part Number SF1500BA03201S
DESCRIPTION
•
•
•
1500 MHz SAW bandpass filter with 6 MHz bandwidth.
3.8 x 3.8 mm ceramic LCC package.
RoHS compliant.
TYPICAL PERFORMANCE
Amp
10 dB/div
Amp
1 dB/div
Phase
10 deg/div
Delay
50 ns/div
Center = 1500 MHz, 20 MHz/div (125 kHz incr)
S11 (1400-1600 MHz)
S22 (1400-1600 MHz)
Spectrum Microwave
324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456
www.SpectrumMicrowave.com
DSSF1500BA03201S Rev A
ECN 36650
8-Apr-2010
Page 1 of 3
1500 MHz SAW Filter
6 MHz Bandwidth
Part Number SF1500BA03201S
SPECIFICATION
Parameter
Center Frequency, FC 1
Insertion Loss
Passband Ripple (1497-1503 MHz)
Phase Ripple (1497-1503 MHz)
Group Delay Deviation (1497-1503 MHz)
Absolute Delay
3 dB bandwidth 2
Lower 3 dB Frequency 2
Upper 3 dB Frequency 2
30 dB Bandwidth 2
40 dB bandwidth 2
Relative Attenuation (1400-1465 MHz)
Relative Attenuation (1530-1600 MHz)
Input /Output Return Loss at Fc
Source and Load Impedance
Temperature Coefficient of Frequency
Ambient Temperature
Notes:
Min
1490
6
1503
38
35
6
Typ
1500
3.9
0.8
3
10
52
18.5
1488.2
1506.7
40.8
48.9
42
38
10
50
-32
25
-
Max
1510
6
2
5
20
21
1497
-
-
Units
MHz
dB
dB p-p
deg p-p
ns p-p
ns
MHz
MHz
MHz
MHz
MHz
dB
dB
dB
ohms
ppm/˚C
˚C
1. Reference frequency. Computed as mean of the 3 dB frequencies.
2. All dB values are referenced to the insertion loss value.
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating Temperature Range
Input Power Level
Min
Max
-40
-30
-
100
100
13
Units
˚C
˚C
dBm
MATCHING CIRCUIT
2
5
Input
50 Ω
Single ended
Output
50 Ω
Single ended
All other pads
Notes:
• Matching components are not required.
• Operation is in a 50 ohm single-ended system.
Spectrum Microwave
324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456
www.SpectrumMicrowave.com
DSSF1500BA03201S Rev A
ECN 36650
8-Apr-2010
Page 2 of 3
1500 MHz SAW Filter
6 MHz Bandwidth
Part Number SF1500BA03201S
PACKAGE OUTLINE
Units: mm
Tolerances are typically ±0.15 mm
except where indicated.
SMI
3201
∆YYWW
Pad Configuration:
Input:
2
Output:
5
Ground:
All other pads
Date Code (YY=year, WW=week)
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm min,
over a 1.3-8.9 µm Ni plating
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave
324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456
www.SpectrumMicrowave.com
DSSF1500BA03201S Rev A
ECN 36650
8-Apr-2010
Page 3 of 3