Toggles Series MB2400 TYPICAL SWITCH ORDERING EXAMPLE Rockers Pushbuttons Programmable Illuminated PB Keylocks Rotaries 11 MB24 C A2 Poles & Circuits 11 61 SPDT DPDT ON ON G 40 Contact Materials & Ratings (ON) (ON) Bushings F Caps W Silver Rated 3A @ 125V AC G Gold Rated 0.4VA max @ 28V AC/DC max A Gold over Silver Rated 3A @ 125V AC & 0.4VA max @ 28V AC/DC max ( ) = Momentary F .201” (5.1mm) Dia. H .295” (7.5mm) Dia. Cap Colors A Black B White C Red A2 .280” (7.1mm) Smooth with Keyway A1 .280” (7.1mm) Threaded with Keyway E2 .285” (7.24mm) Smooth with D Flat E1 .285” (7.24mm) Threaded with D Flat 13 .250” (6.35mm) Straight PC with .465” (11.8mm) Bracket .350” (8.9mm) Smooth with Keyway 15 .425” (10.8mm) Straight PC with .630” (16.0mm) Bracket S2 17 .964” (24.5mm) Straight PC with 1.150” (29.2mm) Bracket S1 .350” (8.9mm) Threaded with Keyway Tactiles Slides Snap-Action Bracket PC Mount Pushbuttons Terminals With Bracket With Reinforced Bracket 23 .250” (6.35mm) Straight PC with .465” (11.8mm) Bracket 25 .425” (10.8mm) Straight PC with .630” (16.0mm) Bracket 26 .750” (19.05mm) Straight PC with .953” (24.2mm) Bracket 30 Right Angle PC 40 Vertical PC IMPORTANT: With Terminal Support Touch Tilt Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Indicators MB2411A2G40-FA SPDT ON-(ON) Circuit Vertical PC Terminals Gold Contacts with 0.4VA Rating Supplement Accessories .280” (7.1mm) Smooth Bushing with Keyway Black .201” (5.1mm) Diameter Cap C102 www.nkk.com A Series MB2400 Toggles Snap-Action Bracket PC Mount Pushbuttons POLES & CIRCUITS Keyway Down Rockers Model Normal Note: Terminal numbers are not actually on the switch. * When using terminal code 32, connected Keyway terminals and schematic are reversed. C 1 (COM) * MB2411 ON (ON) 1-3 1-2 SPDT DP MB2461 ON (ON) 1-3 4-6 1-2 4-5 DPDT 3 2 1 (COM) 3 2 Programmable Illuminated PB SP 4 6 5 BUSHINGS (0.8) .031 (8.0) Dia .315 (0.9) .035 .280” (7.1mm) Threaded with Keyway (5.54) (7.24) .218 .285 E1 (8.0) Dia .315 Maximum Panel Thickness with Standard Hardware: .068” (1.74mm) Rotaries (2.5) .098 (0.9) .035 Maximum Panel Thickness with Standard Hardware: .068” (1.74mm) (0.9) .035 1/4-40 Thd (2.84) Dia .112 (8.0) Dia .315 (5.54) (7.24) .218 .285 (8.9) .350 .350” (8.9mm) Threaded with Keyway (0.8) .031 (2.5) .098 (0.9) .035 (5.54) .218 S1 1/4-40 Thd (2.84) Dia .112 (2.5) .098 (2.5) .098 (0.9) .035 .285” (7.24mm) Threaded with D Flat 1/4-40 Thd (2.84) Dia .112 (5.54) (7.1) .218 .280 (8.0) Dia .315 (2.5) .098 Tactiles (5.54) (7.1) .218 .280 (6.2) Dia .244 (2.84) Dia .112 (0.8) .031 Tilt (8.0) Dia .315 .350” (8.9mm) Smooth with Keyway S2 (6.2) Dia .244 (2.84) Dia .112 (2.5) .098 A1 .285” (7.24mm) Smooth with D Flat (6.2) Dia .244 (2.84) Dia .112 (0.8) .031 (8.0) Dia .315 E2 (5.54) .218 (8.9) .350 (0.9) .035 Maximum Panel Thickness with Standard Hardware: .134” (3.40mm) Indicators .280” (7.1mm) Smooth with Keyway Keylocks Note: Plunger selection is not required for MB2400 pushbuttons. The plunger can be used with or without a cap. A2 Panel Cutouts (5.6) .220 (6.5) Dia .256 (0.6) .024 (6.5) Dia .256 With Optional Locking Ring (5.8) .228 Standard hardware includes 2 hex nuts & 1 lockwasher. Hardware is illustrated following the Typical Switch Dimension drawings. www.nkk.com (6.5) Dia .256 (2.2) Dia .087 Accessories For E1 or E2 Bushing with D Flat (6.5) .256 Supplement For A1, A2, S1, or S2 Bushing with Keyway Pushbuttons Pole Down Throw & Switch Schematics Slides Normal Connected Terminals Touch Plunger Position ( ) = Momentary C103 Toggles Series MB2400 Keylocks Programmable Illuminated PB Pushbuttons Rockers CONTACT MATERIALS & RATINGS W Silver over Silver Power Level 3A @ 125V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: Complete explanation of operating range in Supplement section. C A Power Level or Logic Level Gold over Silver 3A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. TERMINALS Straight PC Mount with Bracket 13 Straight PC Mount with Reinforced Bracket 15 .250” (6.35mm) Terminal with .465” (11.8mm) Bracket 17 .425” (10.8mm) Terminal with .630” (16.0mm) Bracket 23 .964” (24.5mm) Terminal with 1.150” (29.2mm) Bracket 25 .250” (6.35mm) Terminal with .465” (11.8mm) Bracket 26 .750” (19.05mm) Terminal with .953” (24.2mm) Bracket .425” (10.8mm) Terminal with .630” (16.0mm) Bracket Tactiles Slides Rotaries Snap-Action Bracket PC Mount Pushbuttons 32 Right Angle PC Right Angle PCB with Reverse Circuit Available only in single pole with 0.4VA rating (code G) 40 Vertical PC PCB footprints are on the following Typical Switch Dimension pages. CAPS & CAP COLORS F AT475 .201” (5.1mm) Diameter Cap (5.1) Dia .201 (6.4) .253 H (4.0) .157 AT496 .295” (7.5mm) Diameter Cap Material: Polyamide Material: Polyamide Finish: Glossy Finish: Glossy Supplement Accessories Indicators Touch Tilt 30 Cap Colors Available: C104 A Black www.nkk.com B White (7.5) Dia .295 (6.4) .253 C Red (4.0) .157 Toggles Series MB2400 Snap-Action Bracket PC Mount Pushbuttons TYPICAL SWITCH DIMENSIONS Single Pole (2.4) .096 (0.9) .035 Double Pole B R AC KE T LE N GT H (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (4.5) Typ .177 (1.17) Typ .046 (1.17) Typ .046 (4.8) Typ .189 (3.2) Typ .126 (8.0) .315 (15.8) .622 MB2411A2G13-FA (12.7) .500 (1.6) Typ .063 (2.4) Typ .095 (1.6) Typ .063 3 (7.9) Typ .311 (7.9) Typ .311 2 (4.7) Typ .185 (4.7) Typ .185 1 (1.8) Dia Typ .073 (1.5) Dia Typ .059 C (4.8) Typ .189 3 6 2 5 1 4 (1.8) Dia Typ .073 (1.5) Dia Typ .059 Terminal Code: Terminal Length: Bracket Length: 13 .250 (6.35mm) .465 (11.8mm) 15 .425 (10.8mm) .630 (16.0mm) 17 .964 (24.5mm) 1.150 (29.2mm) CL (6.4) .253 Straight PC • Reinforced Bracket (5.1) Dia Typ .201 (2.8) Dia Typ .112 (6.2) Dia Typ .244 Single Pole (2.4) .096 (0.9) .035 Double Pole 2 NO (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 3 NC (4.5) Typ .177 (4.8) Typ .189 (1.27) Typ .050 (1.17) Typ .046 (6.35) Typ .250 (4.8) Typ .189 (19.05) .750 3 2 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (12.7) .500 (2.4) Typ .095 (3.18) Typ .125 (3.18) Typ .125 (9.53) Typ .375 (9.1) .358 1 (9.53) Typ .375 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 Touch 1 C MB2411A2G23-FA Indicators TERMIN A L LEN G T H Tilt B R AC KE T LE N GT H 3 6 2 5 1 4 Terminal Code: Terminal Length: Bracket Length: 23 .250 (6.35mm) .465 (11.8mm) 25 .425 (10.8mm) .630 (16.0mm) 26 .750 (19.05mm) .953 (24.2mm) CL www.nkk.com Accessories (7.1) .280 Programmable Illuminated PB 3 NC Keylocks 2 NO Rotaries 1 C Tactiles T ERMIN A L LEN G T H Supplement (7.1) .280 Pushbuttons (6.4) .253 Straight PC • Bracket (5.1) Dia Typ .201 (2.8) Dia Typ .112 (6.2) Dia Typ .244 Rockers Slides C105 Toggles Series MB2400 Snap-Action Bracket PC Mount Pushbuttons TYPICAL SWITCH DIMENSIONS Single Pole Rotaries (2.84) Dia .112 (6.2) Dia .244 Keyway (5.1) Dia .201 C (2.9) .114 (5.08) .200 (1.4) Typ .055 (6.22) .245 (6.4) .253 Right Angle PC (7.32) .288 (2.9) .114 (5.08) .200 (1.4) Typ .055 (6.2) .245 (6.4) .253 Right Angle PCB Slides 1 (12.7) .500 (0.8) Typ .031 (4.7) Typ .185 (1.8) Dia Typ .073 (2.54) Typ .100 (7.32) .288 (4.7) Typ (3.81) .185 6 .150 COM NO NC 4 5 6 1 2 3 3 (0.8) Typ .031 (4.7) Typ .185 (1.27) Typ .050 (3.8) .150 4 2 1 (12.7) .500 (4.3) .169 (0.4) .016 (12.7) .500 5 (1.8) Dia Typ .073 (2.54) Typ .100 Single Pole • Reverse Circuit (7.9) .311 (2.84) Dia .112 (6.2) Dia .244 (5.1) Dia .201 (1.4) Typ .055 (5.08) .200 (6.4) .253 (6.2) .245 (2.4) .096 (8.9) .350 (0.4) .016 (9.3) .365 (3.96) Typ .156 NC NO COM (4.6) .180 Vertical PC 3 (2.7) .106 (0.8) .031 2 1 (8.5) .335 (1.4) Typ .055 (3.96) Typ .156 (13.0) .512 1 2 3 (9.27) .365 (1.8) Dia Typ .073 (2.54) Typ .100 3 Single Pole (2.84) Dia .112 (6.2) Dia .244 Touch Keyway (2.4) .096 (6.2) .245 (6.4) .253 (7.32) .288 (0.4) .016 (12.7) .500 Accessories (1.4) Typ .055 (5.08) .200 NC (2.7) .106 (0.8) Typ .031 (3.8) Typ .150 www.nkk.com 2 1 NO 2 COM 1 (12.7) .500 (1.27) .050 (8.0) .315 (1.8) Dia Typ .073 (2.54) Typ .100 (2.4) Typ .094 NC 6 3 NO 5 2 COM 4 1 Double Pole MB2411A2G40-FA (3.81) Typ .150 3 (13.0) .512 (5.1) Dia .201 Indicators 3 (1.27) .050 (12.7) .500 (2.4) .096 (13.0) .512 MB2461A2G30-FA Tactiles Tilt (0.4) .016 (12.7) .500 (5.1) Dia .201 C106 2 (4.3) .169 (2.84) Dia .112 (6.2) Dia .244 Keyway Supplement 1 2 3 Double Pole Keyway MB2411A2G32-FA (4.7) Typ .185 COM NO NC (7.9) .311 (2.4) .096 (13.0) .512 MB2411A2G30-FA Keylocks Programmable Illuminated PB Pushbuttons Rockers Right Angle PC (4.8) .189 (12.7) .500 (3.81) Typ .150 (1.27) Typ .050 (12.7) .500 (1.8) Dia Typ .073 (2.54) Typ .100 3 6 2 5 1 4 Series MB2400 Toggles Snap-Action Bracket PC Mount Pushbuttons HARDWARE (8.0) .315 AT509 Lockwasher (6.4) Dia (10.2) Dia .252 .402 1 included with each switch Material: Brass with Nickel Plating (9.0) .354 (1.5) .059 Material: Steel with Zinc/Chromate C (0.5) .020 Programmable Illuminated PB 2 included with each switch Optional Hardware (12.0) Dia .472 Material: Steel with Zinc/Chromate (5.5) or .229 (1.68) .066 (0.8) .031 Tilt Tactiles Slides Rotaries (0.8) .031 (12.0) Dia .472 Touch (1.7) .067 (2.0) .079 (5.5) .217 Indicators Material: Steel with Zinc/Chromate (6.2) Dia .244 Accessories (2.0) .079 AT515 Locking Ring for E1 Bushing Keylocks (6.35) Dia .250 Supplement AT507H Locking Ring for A1 or S1 Bushing Pushbuttons 1/4-40 Thd AT513H Inch Threaded Hexagon Nut Rockers Standard Hardware www.nkk.com C107