dual-in-line sockets - PRECI

DIL SOCKETS
DIL SOCKETS
QUICK SELECTOR CHART
DIL / SIL / TO SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
DIL
GRID
2.54 mm
1.778 mm
SOCKETS
SIL
STAGGERED
STAGGERED
2.54 mm
2.54 mm
TO
SEE PAGE
Solder tail
129
Solder tail automatic
insertion
130
Solder tail
with decoupling capacitor
131
141
Surface mount
132, 134
Surface mount
pick and place
133, 135
Solder tail
ultralow profile
137
Solder tail
interconnect
138
Wire-wrap
139
Solderless
press-fit mount
142
Carrier
143
Display right angle
solder tail
144
Crystal, relay and display,
partially equipped
solder tail
151
150
150
149
141
149
HEADERS
Solder tail
145
Solder tail interconnect
145
Surface mount
146
Surface mount
pick and place
147
Solder tail
wiring slotted head
148
Solder tail
wiring turret head
148
Solder tail
wiring solder cup
148
126
141
Due to technical progress, all information provided is subject to change without prior notice.
DIL SOCKETS
GENERAL SPECIFICATIONS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
The values listed below are general specs applying for PRECI-DIP DIL sockets. Please see individual catalog page for additional and product
specific technical data.
OPERATING TEMPERATURE RANGE
CLIMATIC CATEGORY (IEC)
OPERATING HUMIDIT Y RANGE
MA X. WORKING VOLTAGE
-55 ... +125 °C
55/125/21
Annual mean 75%
100 VRMS /150 VDC
PRECI-DIP connectors designated « Series Preci-Dip Connector » are recognized by UL LLC and listed under « Connectors for Use
in Data, Signal, Control and Power Applications », File Nr. E174442.
MECHANICAL CHARACTERISTICS
CLIP RETENTION
CONTACT (SLEEVE / CLIP) RETENTION
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2
ELECTRICAL CHARACTERISTICS
CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS
Min. 10’000 M:
Max. 1 pF
AIR AND CREEPAGE DISTANCES BETWEEN ANY TWO ADJACENT CONTACTS
(Min. 0.2 mm FOR SHRINK-DIP SOCKETS)
Min. 0.6 mm
INSUL ATION RESISTANCE AT 500 V AC BETWEEN ANY TWO ADJACENT CONTACTS
ENVIRONMENTAL CHARACTERISTICS
DIL SOCKETS
The sockets withstand the following environmental tests without mechanical
and electrical defects:
• Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h
• Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,
1 cycle of 24 h
• Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
• Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min.
• Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,
1 octave/min, 10 cycles for each axis
• Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests, no contact interruption >50 ns does appear.
• Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7
• Resistance to soldering heat J-STD-020C, 260 °C, 20 s
• Moisture sensitivity J-STD-020C level 1
SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS
PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5
• Press-in force:
• Push-out force:
• Push-out 3rd cycle:
90 N max. (at min. hole dia.) / 65 N typ.
30 N min. (at max. hole dia.) / 50 N typ.
20 N min. (at max. hole dia.)
PCB HOLE DIMENSIONS
• 2.54 mm grid
Finished hole Ø: 1 + 0.09/-0.06 mm
Drilled hole Ø: 1.15 ± 0.025 mm
PCB HOLE PL ATING
PCB surface finish
• Tin
• Copper
• Gold over nickel
Hole plating
5-15 μm tin over min. 25 μm copper
min. 25 μm copper
0.05-0.2 μm gold over 2.5-5 μm nickel
over min. 25 μm copper
Due to technical progress, all information provided is subject to change without prior notice.
127
DUAL-IN-LINE SOCKETS
INSULATOR BODIES / STANDARD, OPEN FRAME
WWW.PRECIDIP.COM
210
Fig. 1
304
Fig. 2
306
Fig. 3
308
Fig. 4
310
Fig. 5
TEL +41 32 421 04 00
[email protected]
328
Fig. 13
420
Fig. 14
422
Fig. 15
642
Fig. 25
648
Fig. 26
650
Fig. 27
424
Fig. 16
652
Fig. 28
428
Fig. 17
950
Fig. 29
432
Fig. 18
312
Fig. 6
610
Fig. 19
952
Fig. 30
314
Fig. 7
624
Fig. 20
964
Fig. 31
316
Fig. 8
318
Fig. 9
320
Fig. 10
628
Fig. 21
632
Fig. 22
ORDERING INFORMATION
Example:
322
Fig. 11
324
Fig. 12
128
Row spacing
Number of pins
636
Fig. 23
110-PP-314-41-001101 (Order Code)
640
Fig. 24
314
Fig. 7
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE SOCKETS
OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Open frame standard low profile DIL Sockets.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
OPTIONS
1 Insulators without center bar *
Open frame insulators 318, 320, 322, 324, 624, 628, 632, 640
and 648 available on special request without center bars; add
suffix 151 to the part number. Example 110-83-628-41-001101
becomes 110-83-628-41-001151
2 Sockets with increased solder tail length of 4.2 mm
allowing application on multilayer PCBs up to 3.4 mm
thickness replace 110-..-...-..-...... by 111-..-...-..-......
3 Sockets with soft brass pin series 110-..-...-..-005101,
please consult
4 For DIL Sockets with closed frame insulators replace 110-...
by 210-... Please consult for available pin numbers
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
SEE PAGE 128
ORDER CODES
10
12.6
5.08
7.6
Fig. 1
110-PP-210-41-001101
4
6
8
10
12
14
16
18*
20*
22*
24*
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
110-PP-304-41-001101
110-PP-306-41-001101
110-PP-308-41-001101
110-PP-310-41-001101
110-PP-312-41-001101
110-PP-314-41-001101
110-PP-316-41-001101
110-PP-318-41-001101
110-PP-320-41-001101
110-PP-322-41-001101
110-PP-324-41-001101
110-PP-328-41-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
110-PP-420-41-001101
110-PP-422-41-001101
110-PP-424-41-001101
110-PP-428-41-001101
110-PP-432-41-001101
10
24*
28*
32*
36
40*
42
48*
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
110-PP-610-41-001101
110-PP-624-41-001101
110-PP-628-41-001101
110-PP-632-41-001101
110-PP-636-41-001101
110-PP-640-41-001101
110-PP-642-41-001101
110-PP-648-41-001101
110-PP-650-41-001101
110-PP-652-41-001101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
110-PP-950-41-001101
110-PP-952-41-001101
110-PP-964-41-001101
Due to technical progress, all information provided is subject to change without prior notice.
B
C
DIL SOCKETS
INSUL ATOR
FL AMMABILIT Y
129
DUAL-IN-LINE SOCKETS
AUTOMATIC INSERTION / OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
DIL sockets with ribbed insulator body and soft copper alloy contacts compatible with automatic insertion equipment.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
Other pin count please consult.
NO. OF POLES
B
SEE BELOW
ORDER CODES
6
8
14
16
18
20
24
28
22
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.16
Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
110-PP-306-41-605101
110-PP-308-41-605101
110-PP-314-41-605101
110-PP-316-41-605101
110-PP-318-41-605101
110-PP-320-41-605101
110-PP-324-41-605101
110-PP-328-41-605101
110-PP-422-41-605101
24
28
32
40
15.24
15.24
15.24
15.24
Fig. 9
Fig. 10
Fig. 11
Fig. 12
1
2
3
4
5
6
7
7a
8
110-PP-624-41-605101
110-PP-628-41-605101
110-PP-632-41-605101
110-PP-640-41-605101
INSULATOR BODIES
306
Fig. 1
308
Fig. 2
318
Fig. 5
320
Fig. 6
624
Fig. 9
628
Fig. 10
324
Fig. 7
314
Fig. 3
632
Fig. 11
328
Fig. 7a
316
Fig. 4
130
422
Fig. 8
640
Fig. 12
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE CAPACITOR
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
OPEN FRAME / SOLDER TAIL
With ceramic multilayer decoupling capacitor 100 nF +80% -20% / 50 V, epoxy encapsulated.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
TEMPERATURE RANGE
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
-25°C to +85°C
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
83
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
14
16
18
20
17.7
20.3
22.8
25.3
C
SEE PAGE 128
ORDER CODES
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
Fig. 7
Fig. 8
Fig. 9
Fig. 10
110-PP-314-41-801101
110-PP-316-41-801101
110-PP-318-41-801101
110-PP-320-41-801101
24
28
32
30.4 15.24
35.5 15.24
40.6 15.24
17.7
17.7
17.7
Fig. 20
Fig. 21
Fig. 22
110-PP-624-41-801101
110-PP-628-41-801101
110-PP-632-41-801101
40
50.8 15.24
17.7
Fig. 24
110-PP-640-41-801101
Due to technical progress, all information provided is subject to change without prior notice.
B
DIL SOCKETS
INSUL ATOR
FL AMMABILIT Y
131
DUAL-IN-LINE SOCKETS
OPEN FRAME / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with gull wing terminations for maximum strength and easy in-circuit test.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
PCB LAYOUT
132
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
B
C
D
SEE PAGE 128 ORDER CODES
10
12.6
5.08
7.6
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
110-PP-304-41-105101
110-PP-306-41-105101
110-PP-308-41-105101
110-PP-310-41-105101
110-PP-312-41-105101
110-PP-314-41-105101
110-PP-316-41-105101
110-PP-318-41-105101
110-PP-320-41-105101
110-PP-322-41-105101
110-PP-324-41-105101
110-PP-328-41-105101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
14.80
14.80
14.80
14.80
14.80
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
110-PP-420-41-105101
110-PP-422-41-105101
110-PP-424-41-105101
110-PP-428-41-105101
110-PP-432-41-105101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
19.88
19.88
19.88
19.88
19.88
19.88
19.88
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
110-PP-624-41-105101
110-PP-628-41-105101
110-PP-632-41-105101
110-PP-636-41-105101
110-PP-640-41-105101
110-PP-642-41-105101
110-PP-648-41-105101
9.72 Fig. 1
110-PP-210-41-105101
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE SOCKETS
OPEN FRAME / SURFACE MOUNT, PICK AND PLACE
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with gull wing terminations for maximum strength and easy in-circuit test.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
INSULATOR
Other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number. Other pin counts please consult.
Please consult www.precidip.com for availability size of tape, size of
reel, number of components per reel, packing units and part numbers.
NO. OF POLES
A
6
8
10
14
16
18
20
24
28
7.6
10.1
12.6
17.8
20.3
22.9
25.4
30.4
35.6
28
32
40
42
35.5
40.6
50.8
53.4
B
C
D
E
ORDER CODES
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
12.26
7.6
10.1
12.6
5.3
5.3
5.3
8.3
8.3
8.3
110-PP-306-41-105161
110-PP-308-41-105161
110-PP-310-41-105161
110-PP-314-41-105161
110-PP-316-41-105161
110-PP-318-41-105161
110-PP-320-41-105161
110-PP-324-41-105161
110-PP-328-41-105161
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
19.88 10.0
19.88 10.0
19.88 10.0
19.88 10.0
110-PP-628-41-105161
110-PP-632-41-105161
110-PP-640-41-105161
110-PP-642-41-105161
PCB LAYOUT
Due to technical progress, all information provided is subject to change without prior notice.
133
DIL SOCKETS
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
INSUL ATOR
FL AMMABILIT Y
DUAL-IN-LINE SOCKETS
OPEN FRAME / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with unique self-aligning floating contacts.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
PCB LAYOUT
134
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
B
C
SEE PAGE 128 ORDER CODES
10
12.6
5.08
7.6
Fig. 1
114-PP-210-41-117101
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
114-PP-304-41-117101
114-PP-306-41-117101
114-PP-308-41-117101
114-PP-310-41-117101
114-PP-312-41-117101
114-PP-314-41-117101
114-PP-316-41-117101
114-PP-318-41-117101
114-PP-320-41-117101
114-PP-322-41-117101
114-PP-324-41-117101
114-PP-328-41-117101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
114-PP-420-41-117101
114-PP-422-41-117101
114-PP-424-41-117101
114-PP-428-41-117101
114-PP-432-41-117101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
114-PP-624-41-117101
114-PP-628-41-117101
114-PP-632-41-117101
114-PP-636-41-117101
114-PP-640-41-117101
114-PP-642-41-117101
114-PP-648-41-117101
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE SOCKETS
OPEN FRAME / SURFACE MOUNT PICK AND PLACE
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with unique self-aligning floating contacts.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
INSULATOR
Other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number. Other pin counts please consult.
Please consult www.precidip.com for availability size of tape, size of
reel, number of components per reel, packing units and part numbers.
NO. OF POLES
A
6
8
10
12
14
16
18
20
24
28
7.6
10.1
12.6
15.2
17.8
20.3
22.9
25.4
30.4
35.6
28
32
40
42
35.5
40.6
50.8
53.4
B
C
E
ORDER CODES
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
7.6
10.1
12.6
5.3
5.3
5.3
5.3
8.3
8.3
8.3
114-PP-306-41-134161
114-PP-308-41-134161
114-PP-310-41-134161
114-PP-312-41-134161
114-PP-314-41-134161
114-PP-316-41-134161
114-PP-318-41-134161
114-PP-320-41-134161
114-PP-324-41-134161
114-PP-328-41-134161
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
10.0
10.0
10.0
10.0
114-PP-628-41-134161
114-PP-632-41-134161
114-PP-640-41-134161
114-PP-642-41-134161
PCB LAYOUT
Due to technical progress, all information provided is subject to change without prior notice.
135
DIL SOCKETS
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
INSUL ATOR
FL AMMABILIT Y
DUAL-IN-LINE SOCKETS
INSULATOR BODIES / ULTRALOW, OPEN FRAME
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
306
Fig. 1
328
Fig. 10
640
Fig. 19
308
Fig. 2
420
Fig. 11
648
Fig. 20
310
Fig. 3
422
Fig. 12
650
Fig. 21
314
Fig. 4
424
Fig. 13
316
Fig. 5
428
Fig. 14
318
Fig. 6
624
Fig. 15
320
Fig. 7
628
Fig. 16
ORDERING INFORMATION
322
Fig. 8
632
Fig. 17
Example:
Row spacing
Number of pins
115-PP-314-41-003101 (Order Code)
324
Fig. 9
136
636
Fig. 18
314
Fig. 4
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE SOCKETS
ULTRALOW AND VERY LOW PROFILE / OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
“Ultralow” sockets have specially designed contacts for reduced socket height above PCB.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.52 mm
3 N typ. insertion
1.5 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
Fig. 1
OPTIONS:
VERY LOW VERSION
Very low version (Fig. 2) is optional; change suffix 003101 to 001101.
Insulator body dimensions see page 128 Fig. 1 to 31. Same number
of poles as standard series 110.
NO. OF POLES
A
6
8
10
14
16
18
20
22
24
28
7.6
10.1
12.6
17.7
20.3
22.8
25.3
27.9
30.4
35.5
20
22
24
28
24
28
32
36
40
48
50
B
DIL SOCKETS
ULTRALOW SOCKET
C
SEE PAGE 136
ORDER CODES
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
115-PP-306-41-003101
115-PP-308-41-003101
115-PP-310-41-003101
115-PP-314-41-003101
115-PP-316-41-003101
115-PP-318-41-003101
115-PP-320-41-003101
115-PP-322-41-003101
115-PP-324-41-003101
115-PP-328-41-003101
25.4
27.8
30.4
35.5
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
Fig. 11
Fig. 12
Fig. 13
Fig. 14
115-PP-420-41-003101
115-PP-422-41-003101
115-PP-424-41-003101
115-PP-428-41-003101
30.5
35.5
40.6
45.7
50.8
60.9
63.5
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
115-PP-624-41-003101
115-PP-628-41-003101
115-PP-632-41-003101
115-PP-636-41-003101
115-PP-640-41-003101
115-PP-648-41-003101
115-PP-650-41-003101
Fig. 2
Due to technical progress, all information provided is subject to change without prior notice.
137
DUAL-IN-LINE SOCKETS
INTERCONNECT / OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
For mechanical and electrical interconnection, PCB stacking or elevated positioning of display modules.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PA-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
For complete part number replace XXX with the code given below left
for the required contact length L.
AVAILABLE CONTACT LENGTHS
CONTACT LENGTH
L1 (mm)
CONTACT DIAMETER
D1 (mm)
D2 (mm)
X X X CODE
L2 (mm)
6
7
8
9
10
11
12
13
15
18
22
33
4.2
4.2
4.2
4.85
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
1
1
1
1
1
0.85
1
1
1
1
1
1.18
006
018
003
012
007
002
008
009
001
011
004
013
138
0.51
0.51
0.51
0.46
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
NO. OF POLES
A
B
C
SEE PAGE 128
ORDER CODES
10
12.6
5.08
7.6
Fig. 1
116-PP-210-41-XXX101
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
116-PP-304-41-XXX101
116-PP-306-41-XXX101
116-PP-308-41-XXX101
116-PP-310-41-XXX101
116-PP-312-41-XXX101
116-PP-314-41-XXX101
116-PP-316-41-XXX101
116-PP-318-41-XXX101
116-PP-320-41-XXX101
116-PP-322-41-XXX101
116-PP-324-41-XXX101
116-PP-328-41-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
116-PP-420-41-XXX101
116-PP-422-41-XXX101
116-PP-424-41-XXX101
116-PP-428-41-XXX101
116-PP-432-41-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
116-PP-610-41-XXX101
116-PP-624-41-XXX101
116-PP-628-41-XXX101
116-PP-632-41-XXX101
116-PP-636-41-XXX101
116-PP-640-41-XXX101
116-PP-642-41-XXX101
116-PP-648-41-XXX101
116-PP-650-41-XXX101
116-PP-652-41-XXX101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
116-PP-950-41-XXX101
116-PP-952-41-XXX101
116-PP-964-41-XXX101
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE SOCKETS
OPEN FRAME / WIRE-WRAP
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Solderless wire-wrap terminals are firmly fitted in the insulator body to withstand torque of wrapping tool.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PA-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
OPTION
Other lengths for 1-level, 2-level or 4-level wrapping available
on request
Replace 123-... in order code by
- 121-83-...
- 122-...
- 124-83-...-002101
for 1-level
for 2-level
for 4-level
L = 6.6 mm
L = 9.4 mm
L = 16 mm
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
SEE PAGE 128
ORDER CODES
10
0
4
6
8
10
12
14
16
18
20
22
24
28
12.6
5.08
7.6
Fig. 1
123-PP-210-41-001101
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
123-PP-304-41-001101
123-PP-306-41-001101
123-PP-308-41-001101
123-PP-310-41-001101
123-PP-312-41-001101
123-PP-314-41-001101
123-PP-316-41-001101
123-PP-318-41-001101
123-PP-320-41-001101
123-PP-322-41-001101
123-PP-324-41-001101
123-PP-328-41-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
123-PP-420-41-001101
123-PP-422-41-001101
123-PP-424-41-001101
123-PP-428-41-001101
123-PP-432-41-001101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
123-PP-610-41-001101
123-PP-624-41-001101
123-PP-628-41-001101
123-PP-632-41-001101
123-PP-636-41-001101
123-PP-640-41-001101
123-PP-642-41-001101
123-PP-648-41-001101
123-PP-650-41-001101
123-PP-652-41-001101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
123-PP-950-41-001101
123-PP-952-41-001101
123-PP-964-41-001101
Due to technical progress, all information provided is subject to change without prior notice.
B
C
DIL SOCKETS
PP PL ATING CODE
139
DUAL-IN-LINE SOCKETS
INSULATOR BODIES / SHRINKDIP, OPEN FRAME
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
316
Fig. 1
642
Fig. 10
428
Fig. 2
648
Fig. 11
430
Fig. 3
652
Fig. 12
432
Fig. 4
656
Fig. 13
448
Fig. 5
664
Fig. 14
620
Fig. 6
668
Fig. 15
764
Fig. 16
624
Fig. 7
ORDERING INFORMATION
628
Fig. 8
Example:
Row spacing
Number of pins
117-PP-624-41-005101 (Order Code)
640
Fig. 9
140
624
Fig. 7
Due to technical progress, all information provided is subject to change without prior notice.
SHRINKDIP SOCKETS
OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
High density DIL sockets for devices featuring 0.07” (1.778 mm) lead spacing.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
OPTIONS AVAILABLE ON REQUEST
- * Socket 117-PP-764-41-005101 available with closed frame
insulator PN 217-PP-764-41-005101
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
16
14.6
28
30
32
48
B
DIL SOCKETS
PP PL ATING CODE
C
SEE PAGE 140
ORDER CODES
7.62
10.10
Fig. 1
117-PP-316-41-005101
25.2
27.0
28.8
43.1
10.16
10.16
10.16
10.16
12.70
12.70
12.70
12.70
Fig.
Fig.
Fig.
Fig.
2
3
4
5
117-PP-428-41-005101
117-PP-430-41-005101
117-PP-432-41-005101
117-PP-448-41-005101
20
24
28
40
42
48
52
56
64
68
18.1
21.7
25.2
35.8
37.7
43.1
46.7
50.2
57.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
117-PP-620-41-005101
117-PP-624-41-005101
117-PP-628-41-005101
117-PP-640-41-005101
117-PP-642-41-005101
117-PP-648-41-005101
117-PP-652-41-005101
117-PP-656-41-005101
117-PP-664-41-005101
117-PP-668-41-005101
64*
57.3
19.05
21.50
Fig. 16
117-PP-764-41-005101
- Surface mount Shrinkdip socket with gull wing terminations
Series 117-...-41-105101
- Shrinkdip pin header, solder tail Series 150-10...-00-012101
or 150-80...-00-012101
Please consult
Due to technical progress, all information provided is subject to change without prior notice.
141
DUAL-IN-LINE SOCKETS
OPEN FRAME / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
DIL Sockets with compliant press-fit pin for solderless mount in PCB plated through holes.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
1 +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
AVAILABLE CONTACT LENGTH
CONTACT LENGTH L (mm)
PCB THICKNESS (mm)
X X X CODE
2.8
3.8
1.5-2.0
2.1-3.2
036
035
142
Other plating on request (see page 178 for plating specs).
For complete part number replace XXX with the code given below left
for the required contact length L.
NO. OF POLES
A
B
C
SEE PAGE 128
ORDER CODES
10
12.6
5.08
7.6
Fig. 1
146-PP-210-41-XXX101
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
146-PP-304-41-XXX101
146-PP-306-41-XXX101
146-PP-308-41-XXX101
146-PP-310-41-XXX101
146-PP-312-41-XXX101
146-PP-314-41-XXX101
146-PP-316-41-XXX101
146-PP-318-41-XXX101
146-PP-320-41-XXX101
146-PP-322-41-XXX101
146-PP-324-41-XXX101
146-PP-328-41-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
146-PP-420-41-XXX101
146-PP-422-41-XXX101
146-PP-424-41-XXX101
146-PP-428-41-XXX101
146-PP-432-41-XXX101
24
28
32
36
40
30.5
35.5
40.6
45.7
50.8
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
146-PP-624-41-XXX101
146-PP-628-41-XXX101
146-PP-632-41-XXX101
146-PP-636-41-XXX101
146-PP-640-41-XXX101
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE PIN CARRIER
ASSEMBLIES
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
LOW PROFILE / LOW PROFILE ULTRA THIN / SOLDER TAIL
[email protected]
Easy mounting due to the disposable plastic carrier, no solder or flux wicking problems.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
SLEEVE
CONTACT CLIP (4 FINGER)
CONTACT CLIP (3 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
(Series 614…012101)
0.40 to 0.56 mm
2 N typ. (1.0 N typ. 614…012001) insertion
1 N typ. (0.4 N typ. 614…012001) withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
For complete part number replace X-...-XX-XXX with the code given
below left.
NO. OF POLES
A
B
C
10
12.6
5.08
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
20
22
24
28
32
DIL SOCKETS
INSUL ATOR
FL AMMABILIT Y
SEE PAGE 128
ORDER CODES
7.6
Fig. 1
61X-PP-210-XX-XXX101
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
61X-PP-304-XX-XXX101
61X-PP-306-XX-XXX101
61X-PP-308-XX-XXX101
61X-PP-310-XX-XXX101
61X-PP-312-XX-XXX101
61X-PP-314-XX-XXX101
61X-PP-316-XX-XXX101
61X-PP-318-XX-XXX101
61X-PP-320-XX-XXX101
61X-PP-322-XX-XXX101
61X-PP-324-XX-XXX101
61X-PP-328-XX-XXX101
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
61X-PP-420-XX-XXX101
61X-PP-422-XX-XXX101
61X-PP-424-XX-XXX101
61X-PP-428-XX-XXX101
61X-PP-432-XX-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
61X-PP-610-XX-XXX101
61X-PP-624-XX-XXX101
61X-PP-628-XX-XXX101
61X-PP-632-XX-XXX101
61X-PP-636-XX-XXX101
61X-PP-640-XX-XXX101
61X-PP-642-XX-XXX101
61X-PP-648-XX-XXX101
61X-PP-650-XX-XXX101
61X-PP-652-XX-XXX101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
61X-PP-950-XX-XXX101
61X-PP-952-XX-XXX101
61X-PP-964-XX-XXX101
Fig. 1
Fig. 2
Fig. 3
AVAILABLE VERSIONS
- Standard carrier
see Fig. 1
612…-41-001101
- Low profile
see Fig. 2 for PCB hole Ø 1.4-1.8 mm
614…-41-001101
- Low profile, ultra thin
see Fig. 3 for PCB hole Ø 1.0-1.3 mm
614…-31-012101
Due to technical progress, all information provided is subject to change without prior notice.
143
DUAL-IN-LINE SOCKETS
RIGHT ANGLE VERSION / CLOSED FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle DIL Sockets for components to be mounted perpendicularly to the PCB such as displays.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Fig. 1
ROW SPACING E
E (mm)
ORDER CODE X X
7.62
2.54
299...10-001101
299...11-001101
Fig. 2
Other plating on request (see page 178 for plating specs).
For complete part number replace XX with the code given below left.
NO. OF POLES
A
B
C
SEE
ORDER CODES
10
12.6
5.08
7.6
Fig. 1
299-PP-210-10-001101
6
8
10
12
14
16
18
20
22
24
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
299-PP-306-XX-001101
299-PP-308-XX-001101
299-PP-310-XX-001101
299-PP-312-XX-001101
299-PP-314-XX-001101
299-PP-316-XX-001101
299-PP-318-XX-001101
299-PP-320-XX-001101
299-PP-322-XX-001101
299-PP-324-XX-001101
8
10
12
14
16
18
20
22
24
26
28
30
32
36
40
48
10.1
12.6
15.2
17.7
20.1
22.8
25.3
27.8
30.4
33.0
35.5
38.0
40.6
45.7
50.6
61.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
10.1
10.1
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
299-PP-608-10-002101
299-PP-610-10-002101
299-PP-612-10-002101
299-PP-614-10-002101
299-PP-616-10-002101
299-PP-618-10-002101
299-PP-620-10-002101
299-PP-622-10-002101
299-PP-624-10-002101
299-PP-626-10-002101
299-PP-628-10-002101
299-PP-630-10-002101
299-PP-632-10-002101
299-PP-636-10-002101
299-PP-640-10-002101
299-PP-648-10-002101
Fig. 3
144
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE PIN HEADERS
OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
DIL pin headers with male contacts pluggable into standard female socket contacts.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm / 0.76 mm
Min. 100 cycles
1A
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
NO. OF POLES
A
B
C
10
12.6
5.08
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
20
22
24
28
32
DIL SOCKETS
Other plating on request (see page 178 for plating specs).
For complete part number replace X-...-XXX with the code given
below left.
SEE PAGE 128
ORDER CODES
7.6
Fig. 1
15X-PP-210-00-XXX101
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
15X-PP-304-00-XXX101
15X-PP-306-00-XXX101
15X-PP-308-00-XXX101
15X-PP-310-00-XXX101
15X-PP-312-00-XXX101
15X-PP-314-00-XXX101
15X-PP-316-00-XXX101
15X-PP-318-00-XXX101
15X-PP-320-00-XXX101
15X-PP-322-00-XXX101
15X-PP-324-00-XXX101
15X-PP-328-00-XXX101
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
15X-PP-420-00-XXX101
15X-PP-422-00-XXX101
15X-PP-424-00-XXX101
15X-PP-428-00-XXX101
15X-PP-432-00-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
15X-PP-610-00-XXX101
15X-PP-624-00-XXX101
15X-PP-628-00-XXX101
15X-PP-632-00-XXX101
15X-PP-636-00-XXX101
15X-PP-640-00-XXX101
15X-PP-642-00-XXX101
15X-PP-648-00-XXX101
15X-PP-650-00-XXX101
15X-PP-652-00-XXX101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
15X-PP-950-00-XXX101
15X-PP-952-00-XXX101
15X-PP-964-00-XXX101
Fig. 1
Fig. 2
Fig. 3
AVAILABLE VERSIONS
STANDARD HEADER
150-...-001101
150-...-006101
150-...-018101
See Fig. 1
See Fig. 2
See Fig. 3
INTERCONNECT HEADER
151-...-XXX101
See Fig. 4
CONTACT LENGTH
L1 (mm)
L2 (mm)
X X X CODE
6.2
8.4
15.3
21.2
27.4
003
004
005
016
017
4.7
3.55
3.55
3.55
3.55
Other lengths on request
Fig. 4
Due to technical progress, all information provided is subject to change without prior notice.
145
DUAL-IN-LINE PIN HEADERS
OPEN FRAME / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with male contacts pluggable into standard socket contacts and gull wing terminations.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 100 cycles
1A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
V3
0.25 μm gold
Tin
Tin
0.25 μm gold
Tin
0.75 μm gold
PCB LAYOUT
146
Other plating on request (see page 178 for plating specs).
NO. OF POLES
A
B
C
D
SEE PAGE 128 ORDER CODES
10
12.6
5.08
7.6
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
150-PP-304-00-106101
150-PP-306-00-106101
150-PP-308-00-106101
150-PP-310-00-106101
150-PP-312-00-106101
150-PP-314-00-106101
150-PP-316-00-106101
150-PP-318-00-106101
150-PP-320-00-106101
150-PP-322-00-106101
150-PP-324-00-106101
150-PP-328-00-106101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
14.84
14.84
14.84
14.84
14.84
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
150-PP-420-00-106101
150-PP-422-00-106101
150-PP-424-00-106101
150-PP-428-00-106101
150-PP-432-00-106101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
19.92
19.92
19.92
19.92
19.92
19.92
19.92
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
150-PP-624-00-106101
150-PP-628-00-106101
150-PP-632-00-106101
150-PP-636-00-106101
150-PP-640-00-106101
150-PP-642-00-106101
150-PP-648-00-106101
9.76 Fig. 1
150-PP-210-00-106101
Due to technical progress, all information provided is subject to change without prior notice.
DUAL-IN-LINE PIN HEADERS
OPEN FRAME / SURFACE MOUNT PICK AND PLACE
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Specially designed for reflow soldering including vapor phase with male contact pluggable into standard socket contacts.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 100 cycles
1A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.10 mm
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 150-PP-XXX-00-106161
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number. Other pin counts please consult.
Please consult www.precidip.com for availability size of tape, size of
reel, number of components per reel and packing units.
INSULATOR
PCB LAYOUT
NO. OF POLES
A
6
8
10
14
16
18
20
24
28
7.6
10.1
12.6
17.8
20.3
22.9
25.4
30.4
35.6
28
32
40
42
35.5
40.6
50.8
53.4
B
C
D
E
ORDER CODES
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
7.6
10.1
12.6
5.3
5.3
5.3
8.3
8.3
8.3
150-PP-306-00-106161
150-PP-308-00-106161
150-PP-310-00-106161
150-PP-314-00-106161
150-PP-316-00-106161
150-PP-318-00-106161
150-PP-320-00-106161
150-PP-324-00-106161
150-PP-328-00-106161
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
19.22
19.22
19.22
19.22
10.0
10.0
10.0
10.0
150-PP-628-00-106161
150-PP-632-00-106161
150-PP-640-00-106161
150-PP-642-00-106161
HEADER WITH FLOATING PIN TERMINATION
INSULATOR
PCB LAYOUT
NO. OF POLES
A
6
8
10
14
16
18
20
24
28
7.6
10.1
12.6
17.8
20.3
22.9
25.4
30.4
35.6
28
32
40
42
35.5
40.6
50.8
53.4
Due to technical progress, all information provided is subject to change without prior notice.
B
C
D
E
ORDER CODES
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
12.30
7.6
10.1
12.6
5.3
5.3
5.3
8.3
8.3
8.3
150-PP-306-01-899161
150-PP-308-01-899161
150-PP-310-01-899161
150-PP-314-01-899161
150-PP-316-01-899161
150-PP-318-01-899161
150-PP-320-01-899161
150-PP-324-01-899161
150-PP-328-01-899161
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
19.22
19.22
19.22
19.22
10.0
10.0
10.0
10.0
150-PP-628-01-899161
150-PP-632-01-899161
150-PP-640-01-899161
150-PP-642-01-899161
147
DIL SOCKETS
HEADER WITH GULL-WING TERMINATION
DUAL-IN-LINE PIN HEADERS
SLOTTED HEAD / TURRET / SOLDER CUP / OPEN FRAME / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
DIL headers for wiring applications.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
(Black glass filled polyamide PA66T-GF25-FR for
160-PP-XXX-00-001101/R1 and
180-PP-XXX-00-001101/R1)
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.5 mm
Min. 100 cycles
1A
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Fig. 1
Fig. 2
Fig. 3
AVAILABLE VERSIONS
Replace 1XX-... in order code by
ORDER CODE
DESCRIPTION
DIMENSIONS
160
Header with slotted head
to accept wires
or component leads
See Fig. 1
170
Header with turret head
See Fig. 2
180
Header with solder cup
See Fig. 3
148
Other plating on request (see page 178 for plating specs).
For complete part number replace XX with the code given
below left.
NO. OF POLES
A
B
C
SEE PAGE 128
ORDER CODES
10
12.6
5.08
7.6
Fig. 1
1XX-PP-210-00-001101
4
6
8
10
12
14
16
18
20
22
24
28
5.0
7.6
10.1
12.6
15.2
17.7
20.3
22.8
25.3
27.8
30.4
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
1XX-PP-304-00-001101
1XX-PP-306-00-001101
1XX-PP-308-00-001101
1XX-PP-310-00-001101
1XX-PP-312-00-001101
1XX-PP-314-00-001101
1XX-PP-316-00-001101
1XX-PP-318-00-001101
1XX-PP-320-00-001101
1XX-PP-322-00-001101
1XX-PP-324-00-001101
1XX-PP-328-00-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
1XX-PP-420-00-001101
1XX-PP-422-00-001101
1XX-PP-424-00-001101
1XX-PP-428-00-001101
1XX-PP-432-00-001101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27
Fig. 28
1XX-PP-610-00-001101
1XX-PP-624-00-001101
1XX-PP-628-00-001101
1XX-PP-632-00-001101
1XX-PP-636-00-001101
1XX-PP-640-00-001101
1XX-PP-642-00-001101
1XX-PP-648-00-001101
1XX-PP-650-00-001101
1XX-PP-652-00-001101
50
52
64
63.5 22.86
66.0 22.86
81.2 22.86
25.3
25.3
25.3
Fig. 29
Fig. 30
Fig. 31
1XX-PP-950-00-001101
1XX-PP-952-00-001101
1XX-PP-964-00-001101
Due to technical progress, all information provided is subject to change without prior notice.
TO SOCKETS
SOLDER TAIL / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Sockets for packages with contacts arranged on .200” (5.08 mm) and .230” (5.84 mm) diameter acc. to JEDEC TO-Series outlines.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NO. OF POLES
Fig. 1
A
B
SEE
ORDER CODES
3
4
8
10.0
10.0
10.0
5.08
5.08
5.08
Fig. 3
Fig. 4
Fig. 5
917-PP-103-41-005101
917-PP-104-41-005101
917-PP-108-41-005101
8
10
10.0
10.0
5.84
5.84
Fig. 6
Fig. 7
917-PP-208-41-005101
917-PP-210-41-005101
SOCKETS, SMD MOUNT, FIG. 2
Fig. 2
NO. OF POLES
A
B
SEE
ORDER CODES
3
4
8
8
10
10.0
10.0
10.0
10.0
10.0
5.08
5.08
5.08
5.84
5.84
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
917-PP-103-41-053101*
917-PP-104-41-053101*
917-PP-108-41-053101*
917-PP-208-41-053101*
917-PP-210-41-053101*
*Tape & Reel packaging:
replace 101 by suffix 191 to part number. Other pin counts please consult.
Please consult www.precidip.com for availability size of tape, size of
reel, number of components per reel and packing units.
Fig. 3
Fig. 4
Fig. 5
Due to technical progress, all information provided is subject to change without prior notice.
Fig. 6
Fig. 7
149
DIL SOCKETS
SOCKETS, SOLDER TAIL, FIG. 1
SPECIFIC APPLICATIONS
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
SOLDER TAIL / STAGGERED DIL AND SIL SOCKETS
[email protected]
Quad-in-line sockets and staggered (zig-zag) strips are suitable for IC's with staggered double row Dual-in-line type pin patterns.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
QUAD-IN-LINE SOCKET
NO. OF POLES
SEE
ORDER CODES
64
Fig. 1
110-PP-064-01-505101
Note:
Suitable for quad-in-line packages with 19.05 / 23.50 mm row
spacing acc. to JEDEC MO-030.
Quad-in-line socket layout requires 19.05 / 24.13 mm row spacing.
Fig. 1
STAGGERED ZIG-ZAG STRIPS
Fig. 2
Fig. 3
* 14-pin strips are not stackable end to end
150
NO. OF POLES
A
C
14*
19.00
5.0
16
21.50
5.0
20
26.57
5.0
24
31.65
5.0
28
36.73
5.0
30
39.27
5.0
40
52.00
5.0
VERSION
SEE
ORDER CODES
left
right
left
right
left
right
left
right
left
right
left
right
left
right
Fig. 2
Fig. 3
Fig. 2
Fig. 3
Fig. 2
Fig. 3
Fig. 2
Fig. 3
Fig. 2
Fig. 3
Fig. 2
Fig. 3
Fig. 2
Fig. 3
410-PP-214-10-001101
410-PP-214-10-002101
410-PP-216-10-001101
410-PP-216-10-002101
410-PP-220-10-001101
410-PP-220-10-002101
410-PP-224-10-001101
410-PP-224-10-002101
410-PP-228-10-001101
410-PP-228-10-002101
410-PP-230-10-001101
410-PP-230-10-002101
410-PP-240-10-001101
410-PP-240-10-002101
Due to technical progress, all information provided is subject to change without prior notice.
SPECIFIC APPLICATIONS
SOCKETS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
CRYSTAL, RELAY AND DISPLAY SOCKETS / SOLDER TAIL
Partially equipped DIL sockets and display sockets.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
CONTACT CLIP (6 FINGER)
ACCEPTED PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
(Series 510...504101)
0.40 to 0.56 mm
2 N typ. (0.7 N typ. 510...504101) insertion
1 N typ. (0.4 N typ. 510...504101) withdrawal
(polished steel gauge Ø 0.43 mm)
(6 finger: Ø 0.46 mm)
Min. 100 cycles
1A
Max. 10 m:
Min. 1’000 VRMS
Other plating on request (see page 178 for plating specs).
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Fig. 6
Fig. 2
Fig. 7
Fig. 3
Fig. 8
Fig. 4
Fig. 9
Fig. 5
Fig. 10
PARTIALLY EQUIPPED DIL SOCKETS
DIL SOCKETS
Fig. 1
NO. OF POLES
TOTAL EQUIPPED
A
B
10 / 6
10 / 8
12.6
12.6
5.08
5.08
12
14
14
16
16
16
28
28
15.2
17.7
17.7
20.3
20.3
20.3
35.5
35.5
7.62
7.62
7.62
7.62
7.62
7.62
7.62
7.62
/
/
/
/
/
/
/
/
6
4
8
4
8
8
14
16
C
SEE
ORDER CODES
7.6
7.6
Fig. 1
Fig. 2
110-PP-210-01-742101
110-PP-210-01-839101
10.1
10.1
10.1
10.1
10.1
10.1
10.1
10.1
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
110-PP-312-01-680101
110-PP-314-10-001101
110-PP-314-10-002101
110-PP-316-01-822101
110-PP-316-01-931101
110-PP-316-10-003101
110-PP-328-01-777101
110-PP-328-01-762101
Other pin count and arrangement please consult
DISPLAY SOCKETS FOR 7 SEGMENT
DISPLAYS (1 OR 2 DIGITS)
Fig. 11
Fig. 12
NO. OF POLES
SEE
ORDER CODES
10
18
Fig. 11
Fig. 12
510-PP-010-01-504101
510-PP-018-01-504101
Please consult for other display sockets, single or multidigits
Due to technical progress, all information provided is subject to change without prior notice.
151
www.preci-dip.com
PHONE
PRECI- DIP SA Rue Saint-Maurice 34 P.O.Box 341 CH-2800 Delémont / Switzerland
+41 (0)32 421 04 00 FA X +41 (0)32 421 04 01 E - M A I L [email protected] www.precidip.com