dual-in-line sockets - PRECI

MaLE JumpERS
2.54 mm GRID
WWW.PRECIDIP.COMTEL +41 32 421 04 [email protected]
available with or without insulator and with 2.54, 5.08 or 7.62 mm pitch. for use with standard socket connectors.
TECHnICaL SpECIFICaTIOnS (FOR GEnERaL SpECS, SEE paGE 43)
INSUL ATOR
FL AMMABILITY
COnTaCT
COnnECTInG pIn Ø
MECHANICAL LIFE
RaTED CuRREnT
COnTaCT RESISTanCE
DIELECTRIC STREnGTH
Black glass filled polyester pBt-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
0.56 mm
Min. 100 cycles
3a
Max. 10 mΩ
Min. 1’000 Vrms
ORDERInG InFORmaTIOn ROHS COMPLIANT PARTS
P PL aTInG CODETERmInaTIOn
1
0.25 µm gold
see page 178 for plating spec.
Jumpers for socket connectors, B = 2.54 mm, not insulated (fig. 1)
999-11-110-10
Jumpers for socket connectors, B = 2.54 mm (fig. 2):
999-11-210-10
Black insulator
999-11-210-11
red insulator
fig. 1
fig. 2
Jumpers for socket connectors, B = 5.08 mm, not insulated (fig. 3)
999-11-112-10
Jumpers for socket connectors, B = 5.08 mm (fig. 4):
999-11-220-10
Black insulator
999-11-220-11
red insulator
fig. 3
fig. 4
Jumpers for socket connectors, B = 7.62 mm, not insulated (fig. 5)
999-11-113-10
Jumpers for socket connectors, B = 7.62 mm (fig. 6):
999-11-230-10
Black insulator
999-11-230-11
red insulator
fig. 5
fig. 6
OPTION
Jumpers without insulator with wire Ø 0.50 mm instead of 0.56 mm.
122
P84P123.indd 122
WIDTH B (mm)
PaRT numBER
2.54
5.08
7.62
999-51-110-10
999-51-112-10
999-51-113-10
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:12
FEmaLE JumpERS
2 mm / 2.54 mm GRID
WWW.PRECIDIP.COMTEL +41 32 421 04 [email protected]
female jumpers, colour coded, closed or open top of insulator body.
TECHnICaL SpECIFICaTIOnS (FOR GEnERaL SpECS, SEE paGE 43)
INSUL ATOR
FL AMMABILITY
COnTaCT
MaTInG pIn
MECHANICAL LIFE
RaTED CuRREnT
COnTaCT RESISTanCE
DIELECTRIC STREnGTH
Black glass filled polyester pBt-Gf30-fr
ul 94V-o
phosphor bronze
0.635 mm
Min. 100 cycles
1 a (2 mm) / 3 a (2.54 mm)
Max. 20 mΩ
Min. 500 Vrms
ORDERInG InFORmaTIOn ROHS COMPLIANT PARTS
19
pCB COnnECTORS
PP PL aTInG CODETERmInaTIOn
flash gold
see page 178 for plating specs.
2 mm jumpers for
0.5 mm pin headers, closed body:
999-19-220-00
Black insulator
2 mm jumpers for
0.5 mm pin headers, stackable open body:
999-19-320-00
Black insulator
2.54 mm jumpers for
0.635 mm pin headers, closed body:
999-19-210-00
Black insulator
999-19-210-02
red insulator
999-19-210-06
Blue insulator
2.54 mm jumpers for
0.635 mm pin headers, stackable open body:
999-19-310-00
Black insulator
999-19-310-02
red insulator
999-19-310-06
Blue insulator
due to technical progress, all information provided is subject to change without prior notice.
P84P123.indd 123
123
23.08.12 10:12
DIL SOCKETS
DIL SOCKETS
QUicK Selector CHart
DIL / SIL / TO SocKets
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
DIL SILTO
Grid
2.54 mm
1.778 mm
SOCKets
STAGGEREDSTAGGERED
2.54 mm
2.54 mm
SEE page
solder tail 129
solder tail automatic insertion
130
141
150
150
149
solder tail131
with decoupling capacitor
surface mount
132, 134
141
surface mount
pick and place
133, 135
149
solder tail137
ultralow profile
solder tail138
interconnect
wire-wrap139
solderless142
press-fit mount
carrier143
display right angle144
solder tail
crystal, relay and display,151
partially equipped
solder tail
HEADERS
solder tail
145141
solder tail interconnect145
surface mount146
surface mount147
pick and place
solder tail148
wiring slotted head
solder tail148
wiring turret head
solder tail148
wiring solder cup
126
P126P127.indd 126
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DIL SocKets
GeNeral speciFicatioNs
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
the values listed below are general specs applying for preci-dip dil sockets. please see individual catalog page for additional and product
specific technical data.
OperatiNg temperatUre raNge
Climatic categorY (IEC)
OperatiNg HUmidit Y raNge
ma X. worKiNg voltage -55 ... +125 °c
55/125/21
annual mean 75%
100 Vrms /150 Vdc
preci-dip connectors designated « series preci-dip connector » are recognized by ul llc and listed under « connectors for use
in data, signal, control and power applications », file nr. e174442.
PacKagiNg
mecHaNical cHaracteristics
Clip reteNtioN
CoNtact (sleeve / clip) reteNtioN
Min. 40 n (no displacement under axial force applied)
Min. 3.3 n acc. to Mil-dtl-83734, pt 4.6.4.2
Electrical cHaracteristics
INsUlatioN resistaNce at 500 V AC BetweeN aNY two adJaceNt coNtacts
Min. 10’000
MΩ
• s tandard packaging for dil sockets is tube
packaging.
• sMd mount sockets available on request
with tape & reel packaging acc. to eia standard 481.
these products are marked with the symbol:
CapacitaNce BetweeN aNY two adJaceNt coNtacts
Max. 1 pf
Air aNd creepage distaNces BetweeN aNY two adJaceNt coNtacts
(min. 0.2 mm For SHriNK-Dip socKets)
Min. 0.6 mm
ENviroNmeNtal cHaracteristics
the sockets withstand the following environmental tests without mechanical
and electrical defects:
• dry heat steady state iec 60512-11-9.11i / 60068-2-2.Bb: 125 °c, 16 h
• d amp heat cyclic iec 60512-11-12.11m / 60068-2-30.db: 25/55 °c, 90 – 100 %rh,
1 cycle of 24 h
• cold steady state iec 60512-11-10.11j / 60068-2-1.a: -55 °c, 2 h
• thermal shock iec 60512-11-4.11d / 60068-2-14.na: -55/125 °c, 5 cycles 30 min.
• sinusoidal vibrations iec 60512-6-4.6d / 60068-2-6.fc: 10 to 500 hz, 10 g,
1 octave/min, 10 cycles for each axis
• shock iec 60512-6-3.6c / 60068-2-27.ea: 50 g, 11 ms, 3 shocks in three axis
during the above two tests, no contact interruption >50 ns does appear.
please consult www.precidip.com for availability,
size of tape, size of reel, number of components
per reel, packing units and part numbers.
• solderability J-std-002a, test a, 245 °c, 5 s, solder alloy snag3.8cu0.7
• resistance to soldering heat J-std-020c, 260 °c, 20 s
• Moisture sensitivity J-std-020c level 1
• resistance to corrosion:
1) salt spray test iec 60068-2-11.ka: 48 h
2) s ulfur dioxide (so2) test iec 60068-2-42 kc: 96 h at 25 ppm so2,
25 °c, 75 %rh
3) h
ydrogen sulfide (h2s) test iec 60068-2-43 kd: 96 h at 12 ppm h2s,
25 °c, 75 %rh
Solderless compliaNt Press-Fit cHaracteristics
Press-Fit cHaracteristics measUred acc. to IEC 60352-5
• press-in force: • push-out force:
• push-out 3rd cycle:
90 n max. (at min. hole dia.) / 65 n typ.
30 n min. (at max. hole dia.) / 50 n typ.
20 n min. (at max. hole dia.)
PCB Hole DImENSIONS
• 2.54 mm grid finished hole Ø: 1 + 0.09/-0.06 mm
drilled hole Ø: 1.15 ± 0.025 mm
PCB Hole PL ATING
pcB surface finish
hole plating
• tin
5-15 µm tin over min. 25 µm copper
• copper
min. 25 µm copper
• Gold over nickel0.05-0.2 µm gold over 2.5-5 µm nickel
over min. 25 µm copper
due to technical progress, all information provided is subject to change without prior notice.
127
dil socKets
T & R Packaging
DUal-iN-liNe socKets
INsUlator Bodies / StaNdard, opeN Frame
WWW.PRECIDIP.COm
210
fig. 1
304
fig. 2
306
fig. 3
308
fig. 4
310
fig. 5
312
fig. 6
TEL +41 32 421 04 00
[email protected]
328
fig. 13
420
fig. 14
422
fig. 15
650
fig. 27
652
fig. 28
428
fig. 17
432
fig. 18
314
fig. 7
624
fig. 20
316
fig. 8
320
fig. 10
648
fig. 26
424
fig. 16
610
fig. 19
318
fig. 9
642
fig. 25
950
fig. 29
952
fig. 30
964
fig. 31
628
fig. 21
632
fig. 22
OrderiNG iNFormatioN
Example:
322
fig. 11
324
fig. 12
128
P128P151.indd 128
636
fig. 23
640
fig. 24
Row spacing
Number of pins
110-pp-314-41-001101 (order code)
314
fig. 7
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
open frame standard low profile dil sockets.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
OPTIONS
1 Insulators without center bar *
open frame insulators 318, 320, 322, 324, 624, 628, 632, 640 and 648 available on special request without center bars; add suffix 151 to the part number. example 110-83-628-41-001101 becomes 110-83-628-41-001151
2 Sockets with increased solder tail length of 4.2 mm
allowing application on multilayer pcBs up to 3.4 mm
thickness replace 110-..-...-..-...... by 111-..-...-..-......
3 Sockets with soft brass pin series 110-..-...-..-005101,
please consult
4 For DIL Sockets with closed frame insulators replace 110-...
by 210-... please consult for available pin numbers
AB
Order Codes
1012.6
5.08 7.6fig. 1
110-PP-210-41-001101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
18*22.8
20*25.3
7.62 10.1
22*27.8
7.62 10.1
24*30.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
110-PP-304-41-001101
110-PP-306-41-001101
110-PP-308-41-001101
110-PP-310-41-001101
110-PP-312-41-001101
110-PP-314-41-001101
110-PP-316-41-001101
110-PP-318-41-001101
110-PP-320-41-001101
110-PP-322-41-001101
110-PP-324-41-001101
110-PP-328-41-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
110-PP-420-41-001101
110-PP-422-41-001101
110-PP-424-41-001101
110-PP-428-41-001101
110-PP-432-41-001101
10
24*
28*
32*
36
40*
42
48*
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
110-PP-610-41-001101
110-PP-624-41-001101
110-PP-628-41-001101
110-PP-632-41-001101
110-PP-636-41-001101
110-PP-640-41-001101
110-PP-642-41-001101
110-PP-648-41-001101
110-PP-650-41-001101
110-PP-652-41-001101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
110-PP-950-41-001101
110-PP-952-41-001101
110-PP-964-41-001101
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 129
Csee paGe 128
dil socKets
INSUL ATOR
129
23.08.12 10:13
DUal-iN-liNe socKets
AUtomatic iNsertioN / OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
dil sockets with ribbed insulator body and soft copper alloy contacts compatible with automatic insertion equipment.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
other pin count please consult.
No. oF poles
Bsee below
6
7.62fig. 8
7.62fig. 14
7.62fig. 16
7.62fig. 18
7.62fig. 20
7.62fig. 24
7.62fig. 28
7.62fig. 2210.16 fig. 2415.24
28 15.24
32 15.24
40 15.24
1
2
3
4
5
6
7
7a
8
fig. 9
fig. 10
fig. 11
fig. 12
Order Codes
110-PP-306-41-605101
110-PP-308-41-605101
110-PP-314-41-605101
110-PP-316-41-605101
110-PP-318-41-605101
110-PP-320-41-605101
110-PP-324-41-605101
110-PP-328-41-605101
110-PP-422-41-605101
110-PP-624-41-605101
110-PP-628-41-605101
110-PP-632-41-605101
110-PP-640-41-605101
INsUlator bodies
306
fig. 1
308
fig. 2
318
fig. 5
320
fig. 6
624
fig. 9
628
fig. 10
324
fig. 7
314
fig. 3
316
fig. 4
130
328
fig. 7a
422
fig. 8
632
fig. 11
640
fig. 12
due to technical progress, all information provided is subject to change without prior notice.
DUal-iN-liNe capacitor
socKets
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
OpeN Frame / Solder tail
with ceramic multilayer decoupling capacitor 100 nf +80% -20% / 50 V, epoxy encapsulated.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
TemperatUre raNGe
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
-25°c to +85°c
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
83
tin
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
AB
Csee paGe 128
Order Codes
14
16
18
20
17.7 7.62
20.3 7.62
22.8 7.62
25.3 7.62
10.1
10.1
10.1
10.1
fig. 7
fig. 8
fig. 9
fig. 10
110-PP-314-41-801101
110-PP-316-41-801101
110-PP-318-41-801101
110-PP-320-41-801101
24
28
32
30.5 15.24 17.7
35.5 15.24 17.7
40.6 15.24 17.7
fig. 20
fig. 21
fig. 22
110-PP-624-41-801101
110-PP-628-41-801101
110-PP-632-41-801101
40
50.8 15.24 17.7
fig. 24
110-PP-640-41-801101
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 131
dil socKets
INSUL ATOR
131
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / SUrFace moUNt
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with gull wing terminations for maximum strength and easy in-circuit test.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
PCB LayoUt
132
P128P151.indd 132
AB
C
Dsee paGe 128 Order Codes
1012.6
5.08 7.6 9.72fig. 1
110-PP-210-41-105101
4
5.0 7.62 10.112.26 fig. 2
6
7.6 7.62 10.112.26 fig. 3
810.1
7.62 10.112.26 fig. 4
7.62 10.112.26 fig. 5
1012.6
1215.2
7.62 10.112.26 fig. 6
1417.7
7.62 10.112.26 fig. 7
1620.3
7.62 10.112.26 fig. 8
7.62 10.112.26 fig. 9
1822.8
2025.3
7.62 10.1 12.26 fig. 10
2227.8
7.62 10.1 12.26 fig. 11
2430.4
7.62 10.1 12.26 fig. 12
7.62 10.1 12.26 fig. 13
2835.5
110-PP-304-41-105101
110-PP-306-41-105101
110-PP-308-41-105101
110-PP-310-41-105101
110-PP-312-41-105101
110-PP-314-41-105101
110-PP-316-41-105101
110-PP-318-41-105101
110-PP-320-41-105101
110-PP-322-41-105101
110-PP-324-41-105101
110-PP-328-41-105101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
14.80
14.80
14.80
14.80
14.80
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
110-PP-420-41-105101
110-PP-422-41-105101
110-PP-424-41-105101
110-PP-428-41-105101
110-PP-432-41-105101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
19.88
19.88
19.88
19.88
19.88
19.88
19.88
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
110-PP-624-41-105101
110-PP-628-41-105101
110-PP-632-41-105101
110-PP-636-41-105101
110-PP-640-41-105101
110-PP-642-41-105101
110-PP-648-41-105101
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / SUrFace moUNt, picK aNd place
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with gull wing terminations for maximum strength and easy in-circuit test.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number
other pin counts please consult.
See
page 127
T & R Packaging
INsUlator
AB
D
E
Order Codes
6
7.6 7.6210.1
810.1
7.6210.1
1012.6
7.6210.1
1417.8
7.6210.1
1620.3
7.6210.1
1822.9
7.6210.1
2025.4
7.6210.1
2430.4
7.6210.1
2835.6
7.6210.1
12.26 7.6
12.26 10.1
12.26 12.6
12.26 5.3
12.26 5.3
12.26 5.3
12.26 8.3
12.26 8.3
12.26 8.3
110-PP-306-41-105161
110-PP-308-41-105161
110-PP-310-41-105161
110-PP-314-41-105161
110-PP-316-41-105161
110-PP-318-41-105161
110-PP-320-41-105161
110-PP-324-41-105161
110-PP-328-41-105161
28
32
40
42
19.88 10.0
19.88 10.0
19.88 10.0
19.88 10.0
110-PP-628-41-105161
110-PP-632-41-105161
110-PP-640-41-105161
110-PP-642-41-105161
35.5
40.6
50.8
53.4
15.2417.7
15.2417.7
15.2417.7
15.2417.7
PCB LayoUt
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 133
C
dil socKets
No. oF poles
133
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / SUrFace moUNt
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with unique self-aligning floating contacts.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
PCB LayoUt
134
P128P151.indd 134
AB
Csee paGe 128 Order Codes
1012.6
5.08 7.6fig. 1
114-PP-210-41-117101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
1822.8
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
114-PP-304-41-117101
114-PP-306-41-117101
114-PP-308-41-117101
114-PP-310-41-117101
114-PP-312-41-117101
114-PP-314-41-117101
114-PP-316-41-117101
114-PP-318-41-117101
114-PP-320-41-117101
114-PP-322-41-117101
114-PP-324-41-117101
114-PP-328-41-117101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
114-PP-420-41-117101
114-PP-422-41-117101
114-PP-424-41-117101
114-PP-428-41-117101
114-PP-432-41-117101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
114-PP-624-41-117101
114-PP-628-41-117101
114-PP-632-41-117101
114-PP-636-41-117101
114-PP-640-41-117101
114-PP-642-41-117101
114-PP-648-41-117101
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / SUrFace moUNt picK aNd place
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with unique self-aligning floating contacts.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number
other pin counts please consult.
See
page 127
T & R Packaging
E
Order Codes
114-PP-306-41-134161
114-PP-308-41-134161
114-PP-310-41-134161
114-PP-312-41-134161
114-PP-314-41-134161
114-PP-316-41-134161
114-PP-318-41-134161
114-PP-320-41-134161
114-PP-324-41-134161
114-PP-328-41-134161
35.5 15.2417.710.0
40.6 15.2417.710.0
50.8 15.2417.710.0
53.4 15.2417.710.0
114-PP-628-41-134161
114-PP-632-41-134161
114-PP-640-41-134161
114-PP-642-41-134161
PCB LayoUt
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 135
C
6
7.6
7.6210.1 7.6
810.1
7.62 10.110.1
7.62 10.112.6
1012.6
1215.2
7.6210.1 5.3
7.6210.1 5.3
1417.8
1620.3
7.6210.1 5.3
7.6210.1 5.3
1822.9
2025.4
7.6210.1 8.3
7.6210.1 8.3
2430.4
2835.6
7.6210.1 8.3
28
32
40
42
INsUlator
AB
dil socKets
No. oF poles
135
23.08.12 10:13
DUal-iN-liNe socKets
INsUlator Bodies / Ultralow, opeN Frame
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
306
fig. 1
328
fig. 10
640
fig. 19
308
fig. 2
420
fig. 11
648
fig. 20
310
fig. 3
422
fig. 12
650
fig. 21
314
fig. 4
424
fig. 13
316
fig. 5
428
fig. 14
318
fig. 6
624
fig. 15
320
fig. 7
628
fig. 16
OrderiNG iNFormatioN
322
fig. 8
632
fig. 17
Example:
Row spacing
Number of pins
115-pp-314-41-003101 (order code)
324
fig. 9
136
P128P151.indd 136
636
fig. 18
314
fig. 4
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe socKets
Ultralow aNd very low proFile / OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
“ultralow” sockets have specially designed contacts for reduced socket height above pcB.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.52 mm
3 n typ. insertion
1.5 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
fig. 1
OPTIONS:
Very low versioN
Very low version (fig. 2) is optional; change suffix 003101 to 001101.
insulator body dimensions see page 128 fig. 1 to 31. same number
of poles as standard series 110.
AB
Csee paGe 136
Order Codes
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1417.7
7.6210.1
7.6210.1
1620.3
1822.8
7.6210.1
7.6210.1
2025.3
2227.9
7.6210.1
2430.4
7.6210.1
2835.5
7.62 10.1
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
115-PP-306-41-003101
115-PP-308-41-003101
115-PP-310-41-003101
115-PP-314-41-003101
115-PP-316-41-003101
115-PP-318-41-003101
115-PP-320-41-003101
115-PP-322-41-003101
115-PP-324-41-003101
115-PP-328-41-003101
20
22
24
28
25.4
27.8
30.4
35.5
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
fig. 11
fig. 12
fig. 13
fig. 14
115-PP-420-41-003101
115-PP-422-41-003101
115-PP-424-41-003101
115-PP-428-41-003101
24
28
32
36
40
48
50
30.5
35.5
40.6
45.7
50.8
60.9
63.5
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 15
fig. 16
fig. 17
fig. 18
fig. 19
fig. 20
fig. 21
115-PP-624-41-003101
115-PP-628-41-003101
115-PP-632-41-003101
115-PP-636-41-003101
115-PP-640-41-003101
115-PP-648-41-003101
115-PP-650-41-003101
dil socKets
Ultralow socKet
fig. 2
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 137
137
23.08.12 10:13
DUal-iN-liNe socKets
INtercoNNect / OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
for mechanical and electrical interconnection, pcB stacking or elevated positioning of display modules.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
for complete part number replace XXX with the code given below left
for the required contact length L.
No. oF poles
AvailaBle coNtact leNGtHs
CoNtact leNGtHcoNtact diameter
L1 (mm)
L2 (mm)d1 (mm)d2 (mm)
6
7
8
9
10
11
12
13
15
18
22
33
138
P128P151.indd 138
X X X code
4.21 0.51
006
4.21 0.51
018
4.21 0.51
003
4.851
0.46012
4.21 0.51
007
4.2 0.850.51002
4.21 0.51
008
4.21 0.51
009
4.21 0.51
001
4.21 0.51
011
4.21 0.51
004
4.2 1.180.51013
AB
Csee paGe 128
Order Codes
1012.6
5.08 7.6fig. 1
116-PP-210-41-XXX101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
1822.8
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
116-PP-304-41-XXX101
116-PP-306-41-XXX101
116-PP-308-41-XXX101
116-PP-310-41-XXX101
116-PP-312-41-XXX101
116-PP-314-41-XXX101
116-PP-316-41-XXX101
116-PP-318-41-XXX101
116-PP-320-41-XXX101
116-PP-322-41-XXX101
116-PP-324-41-XXX101
116-PP-328-41-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
116-PP-420-41-XXX101
116-PP-422-41-XXX101
116-PP-424-41-XXX101
116-PP-428-41-XXX101
116-PP-432-41-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
116-PP-610-41-XXX101
116-PP-624-41-XXX101
116-PP-628-41-XXX101
116-PP-632-41-XXX101
116-PP-636-41-XXX101
116-PP-640-41-XXX101
116-PP-642-41-XXX101
116-PP-648-41-XXX101
116-PP-650-41-XXX101
116-PP-652-41-XXX101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
116-PP-950-41-XXX101
116-PP-952-41-XXX101
116-PP-964-41-XXX101
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / Wire-wrap
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
solderless wire-wrap terminals are firmly fitted in the insulator body to withstand torque of wrapping tool.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
OPTION
other lengths for 1-level, 2-level or 4-level wrapping available
on request
replace 123-... in order code by
- 121-83-... - 122-... - 124-83-...-002101 for 1-level
for 2-level
for 4-level
l = 6.6 mm
l = 9.4 mm
l = 16 mm
AB
Order Codes
1012.6
5.08 7.6fig. 1
0
4
5.0 7.6210.1 fig. 2
6
7.6 7.6210.1 fig. 3
810.1
7.6210.1 fig. 4
1012.6
7.6210.1 fig. 5
7.6210.1 fig. 6
1215.2
1417.7
7.6210.1 fig. 7
1620.3
7.6210.1 fig. 8
1822.8
7.6210.1 fig. 9
7.62 10.1
fig. 10
2025.3
2227.8
7.62 10.1
fig. 11
2430.4
7.62 10.1
fig. 12
2835.5
7.62 10.1
fig. 13
123-PP-304-41-001101
123-PP-306-41-001101
123-PP-308-41-001101
123-PP-310-41-001101
123-PP-312-41-001101
123-PP-314-41-001101
123-PP-316-41-001101
123-PP-318-41-001101
123-PP-320-41-001101
123-PP-322-41-001101
123-PP-324-41-001101
123-PP-328-41-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
123-PP-420-41-001101
123-PP-422-41-001101
123-PP-424-41-001101
123-PP-428-41-001101
123-PP-432-41-001101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
123-PP-610-41-001101
123-PP-624-41-001101
123-PP-628-41-001101
123-PP-632-41-001101
123-PP-636-41-001101
123-PP-640-41-001101
123-PP-642-41-001101
123-PP-648-41-001101
123-PP-650-41-001101
123-PP-652-41-001101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
123-PP-950-41-001101
123-PP-952-41-001101
123-PP-964-41-001101
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 139
Csee paGe 128
123-PP-210-41-001101
dil socKets
PP PlatiNG code
139
23.08.12 10:13
DUal-iN-liNe socKets
INsUlator Bodies / SHriNKdip, opeN Frame
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
316
fig. 1
642
fig. 10
428
fig. 2
648
fig. 11
430
fig. 3
652
fig. 12
432
fig. 4
656
fig. 13
448
fig. 5
664
fig. 14
620
fig. 6
668
fig. 15
764
fig. 16
624
fig. 7
OrderiNG iNFormatioN
628
fig. 8
Example:
Row spacing
Number of pins
117-pp-624-41-005101 (order code)
640
fig. 9
140
P128P151.indd 140
624
fig. 7
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
SHriNKdip socKets
OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
high density dil sockets for devices featuring 0.07” (1.778 mm) lead spacing.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
OptioNs availaBle oN reQUest
- * s ocket 117-pp-764-41-005101 available with closed frame
insulator pn 217-pp-764-41-005101
other plating on request (see page 178 for plating specs).
No. oF poles
AB
Csee paGe 140
Order Codes
16
14.6 7.62 10.10 fig. 1
117-PP-316-41-005101
28
30
32
48
25.2
27.0
28.8
43.1
10.16
10.16
10.16
10.16
12.70
12.70
12.70
12.70
fig. 2
fig. 3
fig. 4
fig. 5
117-PP-428-41-005101
117-PP-430-41-005101
117-PP-432-41-005101
117-PP-448-41-005101
20
24
28
40
42
48
52
56
64
68
18.1
21.7
25.2
35.8
37.7
43.1
46.7
50.2
57.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
17.64
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
fig. 14
fig. 15
117-PP-620-41-005101
117-PP-624-41-005101
117-PP-628-41-005101
117-PP-640-41-005101
117-PP-642-41-005101
117-PP-648-41-005101
117-PP-652-41-005101
117-PP-656-41-005101
117-PP-664-41-005101
117-PP-668-41-005101
64*
57.3 19.05 21.50 fig. 16
117-PP-764-41-005101
dil socKets
PP PlatiNG code
- surface mount shrinkdip socket with gull wing terminations
series 117-...-41-105101
- shrinkdip pin header, solder tail series 150-10...-00-012101
or 150-80...-00-012101
please consult
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 141
141
23.08.12 10:13
DUal-iN-liNe socKets
OpeN Frame / Press-Fit
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
dil sockets with compliant press-fit pin for solderless mount in pcB plated through holes.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
PCB Hole Ø
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Bronze cusn4pb4Zn4 (c54400)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
1 +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
for complete part number replace XXX with the code given below left
for the required contact length L.
No. oF poles
AvailaBle coNtact leNGtH
CoNtact leNGtH L (mm)
PCB tHicKNess (mm)
X X X code
2.81.5-2.0
036
3.82.1-3.2
035
142
P128P151.indd 142
AB
Csee paGe 128
Order Codes
1012.6
5.08 7.6fig. 1
146-PP-210-41-XXX101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
1822.8
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
146-PP-304-41-XXX101
146-PP-306-41-XXX101
146-PP-308-41-XXX101
146-PP-310-41-XXX101
146-PP-312-41-XXX101
146-PP-314-41-XXX101
146-PP-316-41-XXX101
146-PP-318-41-XXX101
146-PP-320-41-XXX101
146-PP-322-41-XXX101
146-PP-324-41-XXX101
146-PP-328-41-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
146-PP-420-41-XXX101
146-PP-422-41-XXX101
146-PP-424-41-XXX101
146-PP-428-41-XXX101
146-PP-432-41-XXX101
24
28
32
36
40
30.5
35.5
40.6
45.7
50.8
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
146-PP-624-41-XXX101
146-PP-628-41-XXX101
146-PP-632-41-XXX101
146-PP-636-41-XXX101
146-PP-640-41-XXX101
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe piN carrier
AssemBlies
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
Low proFile / low proFile Ultra tHiN / Solder tail
[email protected]
easy mounting due to the disposable plastic carrier, no solder or flux wicking problems.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
CoNtact clip (3 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
(series 614…012101)
0.40 to 0.56 mm
2 n typ. (1.0 n typ. 614…012001) insertion
1 n typ. (0.4 n typ. 614…012001) withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
for complete part number replace X-...-XX-XXX with the code given
below left.
No. oF poles
AB
Csee paGe 128
Order Codes
1012.6
5.08 7.6fig. 1
61X-PP-210-XX-XXX101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
1822.8
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
61X-PP-304-XX-XXX101
61X-PP-306-XX-XXX101
61X-PP-308-XX-XXX101
61X-PP-310-XX-XXX101
61X-PP-312-XX-XXX101
61X-PP-314-XX-XXX101
61X-PP-316-XX-XXX101
61X-PP-318-XX-XXX101
61X-PP-320-XX-XXX101
61X-PP-322-XX-XXX101
61X-PP-324-XX-XXX101
61X-PP-328-XX-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
61X-PP-420-XX-XXX101
61X-PP-422-XX-XXX101
61X-PP-424-XX-XXX101
61X-PP-428-XX-XXX101
61X-PP-432-XX-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
61X-PP-610-XX-XXX101
61X-PP-624-XX-XXX101
61X-PP-628-XX-XXX101
61X-PP-632-XX-XXX101
61X-PP-636-XX-XXX101
61X-PP-640-XX-XXX101
61X-PP-642-XX-XXX101
61X-PP-648-XX-XXX101
61X-PP-650-XX-XXX101
61X-PP-652-XX-XXX101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
61X-PP-950-XX-XXX101
61X-PP-952-XX-XXX101
61X-PP-964-XX-XXX101
dil socKets
INSUL ATOR
fig. 1
fig. 2
fig. 3
AvailaBle versioNs
- Standard carrier see fig. 1
612…-41-001101
- Low profile
see fig. 2 for pcB hole Ø 1.4-1.8 mm
614…-41-001101
- Low profile, ultra thin
see fig. 3 for pcB hole Ø 1.0-1.3 mm
614…-31-012101
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 143
143
23.08.12 10:13
DUal-iN-liNe socKets
RiGHt aNGle versioN / Closed Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
right angle dil sockets for components to be mounted perpendicularly to the pcB such as displays.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
for complete part number replace XX with the code given below left.
No. oF poles
fig. 1
Row spaciNG E
E (mm)
Order code X X
7.62
2.54
299...10-001101
299...11-001101
fig. 2
AB
Csee
Order Codes
1012.6
5.08 7.6
fig. 1
299-PP-210-10-001101
6
7.6 7.62 10.1
810.1
7.62 10.1
1012.6
7.62 10.1
7.62 10.1
1215.2
1417.7
7.62 10.1
1620.3
7.62 10.1
1822.8
7.62 10.1
7.62 10.1
2025.3
2227.8
7.62 10.1
2430.4
7.62 10.1
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
fig. 2
299-PP-306-XX-001101
299-PP-308-XX-001101
299-PP-310-XX-001101
299-PP-312-XX-001101
299-PP-314-XX-001101
299-PP-316-XX-001101
299-PP-318-XX-001101
299-PP-320-XX-001101
299-PP-322-XX-001101
299-PP-324-XX-001101
8
10
12
14
16
18
20
22
24
26
28
30
32
36
40
48
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
fig. 3
299-PP-608-10-002101
299-PP-610-10-002101
299-PP-612-10-002101
299-PP-614-10-002101
299-PP-616-10-002101
299-PP-618-10-002101
299-PP-620-10-002101
299-PP-622-10-002101
299-PP-624-10-002101
299-PP-626-10-002101
299-PP-628-10-002101
299-PP-630-10-002101
299-PP-632-10-002101
299-PP-636-10-002101
299-PP-640-10-002101
299-PP-648-10-002101
10.1
12.6
15.2
17.7
20.1
22.8
25.3
27.8
30.4
33.0
35.5
38.0
40.6
45.7
50.6
61.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
10.1
10.1
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 3
144
P128P151.indd 144
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe piN Headers
OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
dil pin headers with male contacts pluggable into standard female socket contacts.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
CoNtact
CoNNectiNG piN Ø
mECHANICAL LIFE
Rated cUrreNt
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
0.47 mm / 0.76 mm
Min. 100 cycles
1a
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
TermiNatioN
CoNNectiNG piN
10
0.25 µm gold
80tin
0.25 µm gold
tin
No. oF poles
AB
Csee paGe 128
Order Codes
1012.6
5.08 7.6fig. 1
15X-PP-210-00-XXX101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
1012.6
7.6210.1
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
1822.8
7.6210.1
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
2835.5
7.62 10.1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
15X-PP-304-00-XXX101
15X-PP-306-00-XXX101
15X-PP-308-00-XXX101
15X-PP-310-00-XXX101
15X-PP-312-00-XXX101
15X-PP-314-00-XXX101
15X-PP-316-00-XXX101
15X-PP-318-00-XXX101
15X-PP-320-00-XXX101
15X-PP-322-00-XXX101
15X-PP-324-00-XXX101
15X-PP-328-00-XXX101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
15X-PP-420-00-XXX101
15X-PP-422-00-XXX101
15X-PP-424-00-XXX101
15X-PP-428-00-XXX101
15X-PP-432-00-XXX101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
15X-PP-610-00-XXX101
15X-PP-624-00-XXX101
15X-PP-628-00-XXX101
15X-PP-632-00-XXX101
15X-PP-636-00-XXX101
15X-PP-640-00-XXX101
15X-PP-642-00-XXX101
15X-PP-648-00-XXX101
15X-PP-650-00-XXX101
15X-PP-652-00-XXX101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
15X-PP-950-00-XXX101
15X-PP-952-00-XXX101
15X-PP-964-00-XXX101
dil socKets
other plating on request (see page 178 for plating specs).
for complete part number replace X-...-XXX with the code given
below left.
fig. 1
fig. 2
fig. 3
AvailaBle versioNs
StaNdard Header
150-...-001101
150-...-006101
150-...-018101
see fig. 1
see fig. 2
see fig. 3
INtercoNNect Header
151-...-XXX101
see fig. 4
CoNtact leNGtH
L1 (mm)
L2 (mm)
X X X code
6.24.7 003
8.43.55004
15.33.55005
21.23.55016
27.43.55017
other lengths on request
fig. 4
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 145
145
23.08.12 10:13
DUal-iN-liNe piN Headers
OpeN Frame / SUrFace moUNt
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with male contacts pluggable into standard socket contacts and gull wing terminations.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
0.47 mm
Min. 100 cycles
1a
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
CoNtact
CoNNectiNG piN Ø
mECHANICAL LIFE
Rated cUrreNt
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
TermiNatioN
10
0.25 µm gold
80tin
V3
tin
CoNNectiNG piN
0.25 µm gold
tin
0.75 µm gold
other plating on request (see page 178 for plating specs).
No. oF poles
PCB LayoUt
146
P128P151.indd 146
AB
C
Dsee paGe 128 Order Codes
1012.6
5.08 7.6 9.76fig. 1
150-PP-210-00-106101
4
5.0 7.62 10.112.30 fig. 2
6
7.6 7.62 10.112.30 fig. 3
810.1
7.62 10.112.30 fig. 4
7.62 10.112.30 fig. 5
1012.6
1215.2
7.62 10.112.30 fig. 6
1417.7
7.62 10.112.30 fig. 7
1620.3
7.62 10.112.30 fig. 8
7.62 10.112.30 fig. 9
1822.8
2025.3
7.62 10.1 12.30 fig. 10
2227.8
7.62 10.1 12.30 fig. 11
2430.4
7.62 10.1 12.30 fig. 12
7.62 10.1 12.30 fig. 13
2835.5
150-PP-304-00-106101
150-PP-306-00-106101
150-PP-308-00-106101
150-PP-310-00-106101
150-PP-312-00-106101
150-PP-314-00-106101
150-PP-316-00-106101
150-PP-318-00-106101
150-PP-320-00-106101
150-PP-322-00-106101
150-PP-324-00-106101
150-PP-328-00-106101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
14.84
14.84
14.84
14.84
14.84
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
150-PP-420-00-106101
150-PP-422-00-106101
150-PP-424-00-106101
150-PP-428-00-106101
150-PP-432-00-106101
24
28
32
36
40
42
48
30.5
35.5
40.6
45.7
50.8
53.3
60.9
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
19.92
19.92
19.92
19.92
19.92
19.92
19.92
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
150-PP-624-00-106101
150-PP-628-00-106101
150-PP-632-00-106101
150-PP-636-00-106101
150-PP-640-00-106101
150-PP-642-00-106101
150-PP-648-00-106101
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
DUal-iN-liNe Headers
OpeN Frame / SUrFace moUNt picK aNd place
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
specially designed for reflow soldering including vapor phase with male contact pluggable into standard socket contacts.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
0.47 mm
Min. 100 cycles
1a
Min. 1’000 Vrms
CoplaNarity
SmD termiNatioNs
Max. 0.10 mm
INSUL ATOR
FL AmmABILIT Y
CoNtact
CoNNectiNG piN Ø
mECHANICAL LIFE
Rated cUrreNt
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
TermiNatioN
CoNNectiNG piN
10
0.25 µm gold
80tin
V3*
tin
*only for 150-pp-xxx-00-106161
0.25 µm gold
tin
0.75 µm gold
other plating on request (see page 178 for plating specs).
Tape & Reel packaging:
replace 161 by suffix 191 to part number
other pin counts please consult.
See
page 127
T & R Packaging
No. oF poles
INsUlator
PCB LayoUt
AB
C
D
E
Order Codes
6
7.6 7.6210.1
810.1
7.6210.1
1012.6
7.6210.1
7.6210.1
1417.8
1620.3
7.6210.1
7.6210.1
1822.9
2025.4
7.6210.1
2430.4
7.6210.1
2835.6
7.6210.1
12.30 7.6
12.30 10.1
12.30 12.6
12.30 5.3
12.30 5.3
12.30 5.3
12.30 8.3
12.30 8.3
12.30 8.3
150-PP-306-00-106161
150-PP-308-00-106161
150-PP-310-00-106161
150-PP-314-00-106161
150-PP-316-00-106161
150-PP-318-00-106161
150-PP-320-00-106161
150-PP-324-00-106161
150-PP-328-00-106161
35.5
40.6
50.8
53.4
19.22 10.0
19.22 10.0
19.22 10.0
19.22 10.0
150-PP-628-00-106161
150-PP-632-00-106161
150-PP-640-00-106161
150-PP-642-00-106161
28
32
40
42
15.2417.7
15.2417.7
15.2417.7
15.2417.7
dil socKets
Header witH GUll-wiNG termiNatioN
Header witH FLoatiNG piN termiNatioN
No. oF poles
INsUlator
PCB LayoUt
AB
D
E
Order Codes
6
7.6 7.6210.1
810.1
7.6210.1
1012.6
7.6210.1
1417.8
7.6210.1
1620.3
7.6210.1
1822.9
7.6210.1
2025.4
7.6210.1
2430.4
7.6210.1
2835.6
7.6210.1
12.30 7.6
12.30 10.1
12.30 12.6
12.30 5.3
12.30 5.3
12.30 5.3
12.30 8.3
12.30 8.3
12.30 8.3
150-PP-306-01-899161
150-PP-308-01-899161
150-PP-310-01-899161
150-PP-314-01-899161
150-PP-316-01-899161
150-PP-318-01-899161
150-PP-320-01-899161
150-PP-324-01-899161
150-PP-328-01-899161
28
32
40
42
19.22 10.0
19.22 10.0
19.22 10.0
19.22 10.0
150-PP-628-01-899161
150-PP-632-01-899161
150-PP-640-01-899161
150-PP-642-01-899161
35.5
40.6
50.8
53.4
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 147
C
15.2417.7
15.2417.7
15.2417.7
15.2417.7
147
23.08.12 10:13
DUal-iN-liNe Headers
Slotted Head / tUrret / solder cUp / OpeN Frame / Solder tail
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
dil headers for wiring applications.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
CoNtact
CoNNectiNG piN Ø
mECHANICAL LIFE
Rated cUrreNt
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
0.5 mm
Min. 100 cycles
1a
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
TermiNatioN
CoNNectiNG piN
10
0.25 µm gold
80tin
0.25 µm gold
tin
other plating on request (see page 178 for plating specs).
for complete part number replace XX with the code given
below left.
No. oF poles
fig. 1
fig. 2
fig. 3
AvailaBle versioNs
replace 1XX-... in order code by
Order codeDescriptioN
header with slotted head see fig. 1
to accept wires
or component leads
170
header with turret head
see fig. 2
180
header with solder cup
see fig. 3
P128P151.indd 148
Csee paGe 128
Order Codes
1012.6
5.08 7.6fig. 1
1XX-PP-210-00-001101
4
5.0 7.6210.1
6
7.6 7.6210.1
810.1
7.6210.1
7.6210.1
1012.6
1215.2
7.6210.1
1417.7
7.6210.1
1620.3
7.6210.1
7.6210.1
1822.8
2025.3
7.62 10.1
2227.8
7.62 10.1
2430.4
7.62 10.1
7.62 10.1
2835.5
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
fig. 10
fig. 11
fig. 12
fig. 13
1XX-PP-304-00-001101
1XX-PP-306-00-001101
1XX-PP-308-00-001101
1XX-PP-310-00-001101
1XX-PP-312-00-001101
1XX-PP-314-00-001101
1XX-PP-316-00-001101
1XX-PP-318-00-001101
1XX-PP-320-00-001101
1XX-PP-322-00-001101
1XX-PP-324-00-001101
1XX-PP-328-00-001101
20
22
24
28
32
25.4
27.8
30.4
35.5
40.6
10.16
10.16
10.16
10.16
10.16
12.6
12.6
12.6
12.6
12.6
fig. 14
fig. 15
fig. 16
fig. 17
fig. 18
1XX-PP-420-00-001101
1XX-PP-422-00-001101
1XX-PP-424-00-001101
1XX-PP-428-00-001101
1XX-PP-432-00-001101
10
24
28
32
36
40
42
48
50
52
12.7
30.5
35.5
40.6
45.7
50.8
53.3
60.9
63.5
66.0
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
15.24
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
fig. 19
fig. 20
fig. 21
fig. 22
fig. 23
fig. 24
fig. 25
fig. 26
fig. 27
fig. 28
1XX-PP-610-00-001101
1XX-PP-624-00-001101
1XX-PP-628-00-001101
1XX-PP-632-00-001101
1XX-PP-636-00-001101
1XX-PP-640-00-001101
1XX-PP-642-00-001101
1XX-PP-648-00-001101
1XX-PP-650-00-001101
1XX-PP-652-00-001101
50
52
64
63.5 22.86 25.3
66.0 22.86 25.3
81.2 22.86 25.3
fig. 29
fig. 30
fig. 31
1XX-PP-950-00-001101
1XX-PP-952-00-001101
1XX-PP-964-00-001101
DimeNsioNs
160
148
AB
due to technical progress, all information provided is subject to change without prior notice.
23.08.12 10:13
TO socKets
Solder tail / SUrFace moUNt
WWW.PRECIDIP.COm
TEL +41 32 421 04 00
[email protected]
sockets for packages with contacts arranged on .200” (5.08 mm) and .230” (5.84 mm) diameter acc. to Jedec to-series outlines.
tecHNical speciFicatioNs (For GeNeral specs, see paGe 127)
INSUL ATOR
FL AmmABILIT Y
Sleeve
CoNtact clip (4 FiNGer)
Accepted piN Ø
Forces
mECHANICAL LIFE
Rated cUrreNt
coNtact resistaNce
Dielectric streNGtH
Black glass filled polyester pct-Gf30-fr
ul 94V-o
Brass cuZn36pb3 (c36000)
Beryllium copper (c17200)
0.40 to 0.56 mm
2 n typ. insertion
1 n typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1a
Max. 10 mΩ
Min. 1’000 Vrms
orderiNG iNFormatioN ROHS COmPLIANT PARTS
PP PlatiNG code
Sleeve
Clip
87
83
tin
tin
flash gold
0.75 µm gold
other plating on request (see page 178 for plating specs).
fig. 1
No. oF poles
ABsee
Order Codes
3
4
8
10.0
10.0
10.0
5.08
5.08
5.08
fig. 3
fig. 4
fig. 5
917-PP-103-41-005101
917-PP-104-41-005101
917-PP-108-41-005101
8
10
10.0
10.0
5.84
5.84
fig. 6
fig. 7
917-PP-208-41-005101
917-PP-210-41-005101
dil socKets
SocKets, solder tail, FiG. 1
SocKets, SmD moUNt, FiG. 2
fig. 2
No. oF poles
ABsee
Order Codes
3
4
8
10.0
10.0
10.0
5.08
5.08
5.08
fig. 3
fig. 4
fig. 5
917-PP-103-41-053101
917-PP-104-41-053101
917-PP-108-41-053101
8
10
10.0
10.0
5.84
5.84
fig. 6
fig. 7
917-PP-208-41-053101
917-PP-210-41-053101
See
page 127
T & R Packaging
fig. 3
fig. 4
fig. 5
due to technical progress, all information provided is subject to change without prior notice.
P128P151.indd 149
fig. 6
fig. 7
149
23.08.12 10:13