Ordering number : EN8936A SMA3117 MMIC Amplifiler, 5V, 22.7mA, 0.1 to 3GHz, MCPH6 http://onsemi.com Features • • • • • • High Gain : Gp=33.5dB typ. @2.2GHz Wideband response : fu=3.0GHz Low current : ICC=22.7mA typ. High output power : Po(1dB)=5.7dBm Port impedance : input/output 50Ω Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 6 V 40 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Allowable Power Dissipation Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 0 to 0.02 1 2 Marking TL 3 0.65 LG LOT No. 0.3 0.85 0.25 Packing Type : TL 4 LOT No. 0.07 SMA3117-TL-H 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 MCPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 90512 TKIM/71311AM TKIM TC-00002627 No.8936-1/7 SMA3117 Recommended Operating Conditions at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min VCC Topr Operating Ambient Temperature typ max Unit 4.5 5 5.5 V --40 +25 +85 °C Electrical Characteristics at Ta=25°C, VCC=5V, Zs=ZL=50Ω Parameter Symbol Circuit Current Ratings Conditions min ICC Power Gain Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power *1 Po(1dB) Upper Limit Operating Frequency *1 fu typ max 18.5 22.7 28.0 f=1GHz 29.5 31.2 32.5 f=2.2GHz 30.5 33.5 35.5 f=1GHz 35.0 37.6 f=2.2GHz 34.0 36.5 f=1GHz 9.0 11.2 f=2.2GHz 4.5 6.0 f=1GHz 11.0 14.3 f=2.2GHz 12.0 16.3 dB 4.1 5.0 3.9 5.0 7.5 9.8 3.7 5.7 3dB down below flat gain at f=1GHz dB dB f=2.2GHz f=2.2GHz mA dB f=1GHz f=1GHz Unit 3.0 dB dBm GHz *1 : On evaluation board Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Ordering Information Device Package Shipping memo MCPH6 3,000pcs./reel Pb Free and Halogen Free SMA3117-TL-H Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF 100nH VCC Connect 2, 4 and 5 with GND. IT15580 No.8936-2/7 SMA3117 Evaluation Board IN OUT C1 C2 L1 C3 Symbol Value C1, C2 VCC C3 100pF 1000pF L1 100nH ICC -- VCC 30 Circuit Current, ICC -- mA 25 20 15 10 5 0 0 1 2 3 4 5 Circuit Voltage, VCC -- V 6 IT16522 Gp -- f 40 RLin -- f 0 35 V 5.0 Input Return Loss, RLin -- dB Power Gain , Gp -- dB 5.5V 5.5V 4.5V 30 25 0 1 2 Frequency, f -- GHz 3 4 IT16523 --5 5.0V 4.5V --10 --15 --20 --25 --30 0 1 2 Frequency, f -- GHz 3 4 IT16524 No.8936-3/7 SMA3117 ISL -- f Isolation, ISL -- dB --10 --20 --30 5.0V 4.5V 5.5V --40 --50 0 1 2 3 Output Power, Pout -- dBm Output Power, Pout -- dBm 0 --10 --20 --30 5.0 5.5V V --20 --25 0 1 --20 --10 Input Power, Pin -- dBm 4 IT16526 10 0 --10 --20 --50 --40 --20 --30 --10 Input Power, Pin -- dBm IT16527 S11 3 VCC=5V f=2.2GHz --30 --60 0 S Parameter (VCC=5V) 2 Pout -- Pin 20 10 --40 4.5V --15 Frequency, f -- GHz VCC=5V f=1GHz --50 --10 IT16525 Pout -- Pin --30 --60 --5 --30 4 Frequency, f -- GHz 20 RLout -- f 0 Output Return Loss, RLout -- dB 0 0 IT16528 S22 50 50 100 25 250 10 100 25 250 10 3GHz 10 0 2GHz 50 25 100 250 10 0 25 100 50 250 1GHz 2GHz 1GHz 3GHz --10 --250 --25 --10 --250 --25 --100 --50 IT16529 --100 --50 IT16530 No.8936-4/7 SMA3117 Embossed Taping Specification SMA3117-TL-H No.8936-5/7 SMA3117 Outline Drawing SMA3117-TL-H Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.8936-6/7 SMA3117 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.8936-7/7