High-Voltage, Large-Current Darlington Driver

Ordering number : EN1831F
LB1205
Monolithic Digital IC
High-Voltage, Large-Current
Darlington Driver
http://onsemi.com
Overview
The LB1205 is a 4-unit, high withstand voltage (65V), large-current (1.5A) Darlington driver array with input low
active configuration and sync output.
Features
 4-unit, high withstand voltage design (65V), large-current (1.5A) Darlington driver.
 PNP input type (low active).
 On-chip spark killer diodes.
 On-chip input protection diodes.
 Capable of being driven directly from 5V operated CMOS, TTL.
DIP16F(300mil)
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter
Maximum supply voltage
Symbol
Conditions
Ratings
Unit
VDD max
7.0
VCC max
62
V
Output supply voltage
VO max
65
V
Input supply voltage
VIN max
VDD-7.0 to VDD-10.0
V
Output current
IO max
1.5
A
Spark killer diode forward current
IFS
1.5
A
Allowable power dissipation
Pd max
1.9
W
2.6
W
Operating temperature
Topr
-20 to +75
C
Storage temperature
Tstg
-55 to +150
C
VIN  GND
Independent IC
Mounted on the recommended PCB
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Allowable Operating Conditions at Ta = 25C
Parameter
Symbol
Conditions
Supply voltage range
VDD
Input “ON” level voltage
VINon
VIN  GND, IO = 1.0A
Input “OFF” level voltage
VINoff
IO  30A
Ratings
Unit
3.5 to 7.0
V
VDD-7.0 to VDD-2.6
V
VDD-0.3 to VDD+10.0
V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended
Operating Ranges limits may affect device reliability.
ORDERING INFORMATION
See detailed ordering and shipping information on page 4 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2014
30314HK 20051115-S00002,20121120-S00002/O0808MS
/O1995YK/7097KI/6265KI/D203KI,TS No.1831-1/4
LB1205
Electrical Characteristics at Ta  25C, VDD = 5V
Ratings
Parameter
Symbol
Conditions
Unit
min
Output saturation voltage
typ
max
VOsat1
VIN = VDD-5.0V, IO = 0.5A
1.2
V
VOsat2
VIN = VDD-5.0V, IO = 1.0A
1.5
V
2.0
V
mA
VOsat3
VIN = VDD-5.0V, IO = 1.5A
Output sustain voltage
VOsus
IO = 100mA
Input current
IIN
VDD = 7.0V, VIN = VDD-7.0V
1.0
Spark killer diode forward voltage
VFS
IFS = 1.5A
3.0
V
Spark killer diode reverse current
IRS
VCC = 62V, VO = 0V
30
A
65
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Package Dimensions
unit : mm
PDIP16 FUSED LEADS / DIP16F (300 mil)
CASE 646AQ
ISSUE O
Pd max -- Ta
Allowable power dissipation, Pd max -- W
3.0
2.6
2.5
2.0
1.9
Mounted on the recommended PCB
Independent IC
1.56
1.5
1.14
1.0
0.5
0
-20
0
20
40
60
75 80
100
Ambient temperature, Ta -- °C
No.1831-2/4
LB1205
Pin Assignment
OUT4 IN4
16
15
Recommended PCB
VDD GND GND IN3 OUT3 VCC
14
13
12
11
10
9
1
2
3
4
5
6
VCC OUT1 IN1 GND GND IN2
Cu-foiled (GND) 3cm2
7
8
NC OUT2
80×60mm2
Top view
Note: VCC (pins 1 and 9) is shorted internally.
Equivalent Circuit
OUT1
OUT2
OUT3
OUT4
VCC
8kΩ
2kΩ
20kΩ
1.25kΩ
13kΩ
VDD
GND
IN1
IN3
IN4
VOsat -- IO
10
Output saturation voltage, VOsat -- V
IN2
7
5
3
2
1.0
7
5
7
0.1
2
3
5
7
1.0
2
3
Output current, IO -- A
No.1831-3/4
LB1205
ORDERING INFORMATION
Device
LB1205-E
Package
DIP16F(300mil)
(Pb-Free / Halogen Free)
Shipping (Qty / Packing)
LB1205-L-E
DIP16F(300mil)
(Pb-Free / Halogen Free)
25 / Fan-Fold
LB1205L-E
DIP16F(300mil)
(Pb-Free / Halogen Free)
25 / Fan-Fold
LB1205Z-E
DIP16F(300mil)
(Pb-Free / Halogen Free)
25 / Fan-Fold
25 / Fan-Fold
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts.
SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any
such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.1831-4/4