Ambient Light Sensor, Linear Current Output, with Standby Function

LA0152CS
Ambient Light Sensor,
Linear Current Output,
with Standby Function
www.onsemi.com
Overview
The LA0152CS is a photo IC for ultra-small package ambient light sensor
which has the characteristics of spectral response similar to that of human
eyes. It is suitable for applications like mobile phone, laptop computer, PDA,
DSC and Camcorder.
Features

Smallest OD-CSP package in the world (1.01mm x 1.01mm x thickness:
0.6mm)
Low variation and Optical Output Current in low temperature fluctuation.
Integrated Sleep function.
Low current consumption.



Mobile phones and tablets
Digital still cameras
Security camera
Symbol
Ordering Code:
LA0152CS-TLM-H
Shipping (Qty / packing)
5000 / Tape & Reel
SPECIFICATION
ABSOLUTE MAXIMUM RATINGS at Ta = 25C
Parameter
ORDERING INFORMATION
Package
ODCSP4
(Pb-Free / Halogen Free)
Typical Applications



ODCSP4 1.01 mm x 1.01 mm
(Note 1)
Conditions
Ratings
Unit
Maximum supply
voltage
VCC
6
V
Operating temperature
Topr
30 to +85
C
Storage temperature
Tstg
40 to +100
C
† For information on tape and reel
specifications, including part orientation and
tape sizes, please refer to our Tape and
Reel Packaging Specifications Brochure,
BRD8011/D.
http://www.onsemi.com/pub_link/Collateral/
BRD8011-D.PDF
1. Stresses exceeding those listed in the Absolute Maximum Rating table may damage the device. If
any of these limits are exceeded, device functionality should not be assumed, damage may occur
and reliability may be affected.
RECOMMENED OPERATING CONDITIONS AND
OPERATING VOLTAGE RANGE at Ta = 25C (Note 2)
Ratings
Parameter
Symbol
Conditions
min
typ
SW pin low voltage
Vl
Sleep mode
0
SW pin high voltage
Vh
Active mode
1.4
max
0.4
Unit
V
VCC
V
2. Functional operation above the stresses listed in the Recommended Operating Ranges is not
implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may
affect device reliability.
© Semiconductor Components Industries, LLC, 2015
April 2015- Rev. 1
1
Publication Order Number:
LA0152CS/D
LA0152CS
ELECTRICAL AND OPTICAL CHARACTERISTICS at Ta  25C, VCC = 3.3V
(Note 3)
Ratings
Parameter
Symbol
Conditions
Unit
min
Recommended Supply Voltage
VCC
2.2
typ
max
3.3
5.5
V
210
A
Ev= 0 lux
0.1
A
Ev= 1000 lux
0.3
A
8
10
A
80
100
A
Current dissipation (Note 4, 6)
ICC
Ev = 1000 lux, RL = 5k
Sleep Current(1) (Note 6)
ISL1
Sleep Current(1) (Note 6)
ISL2
Output current (2) (Note 4,6)
IO1
Ev = 100 lx
6
60
Output current (2) (Note 4,6)
IO2
Ev = 1000 lx
Dark current (Note 6)
Ileak
Ev = 0 lx
90
150
0.1
Temperature coefficient (Note 5)
Itc
Ev = 100 lx
0.34
Rise time (Note 7)
Tr
Ev = 1000 lx, RL = 5k
15
40
Fall time (Note 7)
Tf
Ev = 1000 lx, RL = 5k
150
500
Peak sensitivity wave length (Note 5)
p
A
%/C
550
s
s
nm
Saturation output voltage (Note 4,6)
VO
Ev = 1000 lx, RL = 150k
3.0
3.2
V
3. Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may
not be indicated by the Electrical Characteristics if operated under different conditions.
4. Measured with the standard light source A. White LED is used instead in the mass production line.
5. Design guaranteed item
6. Test circuit for measuring current dissipation and output current
Light
source
A
VCC
Ipd
OUT
LA0152CS
A
7. Measuring method of rise time (Tr) and fall time (Tf)
Ipd
Pulse drive
White LED
VCC
0A
Ipd
1.5V
90%
OUT
LA0152CS
VOUT
10%
GND
Tr
www.onsemi.com
2
Tf
LA0152CS
PAD LAYOUT
<Bottom View>
<Top View>
Pin No.
1
4
2
4
3
1
3
2
Pin Name
Function
1
VCC
Power supply
2
EN
Enable
3
GND
Ground
4
OUT
Output
Ball pitch : 0.5mm, Ball size : 0.18mm 
PAD LAYOUT (Photos)
Top View
1
4,Out
4
4
1
Pin 1 mark
It is located at the center of the bottom
of the pakage.
3,Gnd
1,VCC
2
Bottom View
2,EN
3
3
2
Photo diode. Only this part looks dark on the product.
* The photo diode is located in pin 3. Be careful not to mistake the pin 1 mark for the photo diode.
INTRNAL BLOCK DIAGRAM
VCC
1
PD
Current
amplifier
OUT
4
2
EN
3
GND
www.onsemi.com
3
LA0152CS
CHIP PATTERN AND PHOTO-RECEIVING PATTERN DIAGRAMS
LA0152CS chip pattern diagram (top view)
* Pin 1 is on the upper left.
LA0152CS photo-receiving pattern enlarged diagram (effective area)
www.onsemi.com
4
LA0152CS
IO - Llluminance
1000
ICC -- Illuminance
1000
100
10
100
1
0.1
1
10
100
1k
10
1
10k
100
10
Illuminance -- lx
Illuminance -- lx
RIO -- VCC
1.4
@1000lx
Relative current drain ratio, RICC -- ratio
1.2
1
0.8
0.6
0.4
0.2
3
4
5
RICC -- VCC
@1000lx
1.2
1
0.8
0.6
0.4
0.2
0
2
0
2
6
3
4
RIO -- Ta
ID -- Ta
1.E+00
1.2
1.E-01
7
5
3
2
1
1.E-02
7
5
3
2
0.8
1.E-03
7
5
3
2
0.6
1.E-04
7
5
3
2
0.4
1.E-05
7
5
3
2
0.2
--40
--20
0
20
40
60
80
100
1.E-06
--60
120
VO -- Illuminance
10
7
5
3
2
--40
--20
0
20
40
60
80
100
120
Ambient temperature, Ta -- C
Ambient temperature, Ta -- C
1
Relative sensitivity, RS -- ratio
0.9
1
7
5
3
2
0.1
7
5
3
2
0.001
7
5
3
2
0.001
0.8
0.7
0.6
0.5
0.4
LA0152CS
Relative output current ratio, RIO -- ratio
6
7
5
3
2
0
--60
Output voltage, VO -- V
5
Supply voltage, VCC -- V
Supply voltage, VCC -- V
1.4
10k
Human eye
Relative output current ratio, RIO -- ratio
1.4
1k
0.3
0.2
0.1
1
2 3 5 7 10
2 3 5 7100 2 3 5 7 1k
2 3 5 710k 2 3 5 7100k
Illuminance -- lx
www.onsemi.com
5
0
200
400
600
800
1000
LA0152CS
Sleep current - Illuminance
PLE -- deg N gain
1.20
10
Photopic luminous efficiency, PLE -- ratio
@1000lx
1
0.1
0.01
0.001
0.0001
1
10
100
1k
1.00
0.80
0.60
0.40
0.20
10k
Illuminance -- lx
Output Current - EN voltage
100
90
Output current, IO -- μA
80
70
60
50
40
30
20
10
0
0
0.5
1
1.5
2
2.5
3
EN voltage , - V
www.onsemi.com
6
0
-90
-60
-30
0
Angle, deg -- °
30
60
90
LA0152CS
PACKAGE DIMENSIONS
unit : mm
ODCSP4 1.01x1.01
CASE 570AC
ISSUE O
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
7