Ordering number : EN7280A SVC230 Varactor Diode http://onsemi.com Monolithic dual Varactor Diode for FM Tuning 16V, 50nA, CR=1.65, Q=100, CP Features • • • • Twin type varactor diode having an excellent large input characteristic, for use in FM electronic tuning applications Small CP package permits SVC230 applied sets to be compact and slim Possible to be shipped in tape reel packaging, which facilitates automatic insertion High Q Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Reverse Voltage Junction Temperature VR Tj Storage Temperature Tstg Conditions Ratings Unit 16 V 125 °C --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7013A-006 • Package : CP • JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB • Minimum Packing Quantity : 3,000 pcs./reel 0.1 SVC230-TB-E Packing Type: TB Marking 1.5 3 2 TB 1 : Anode 2 : Anode 3 : Cathode CP 0.3 1.1 0.4 0.05 0.95 ZA LOT No. 1 LOT No. 0.5 2.5 0.5 2.9 Electrical Connection 3 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 72512 TKIM/O1002 TSIM TA-3617 No.7280-1/6 SVC230 Electrical Characteristics at Ta=25°C Parameter Symbol Breakdown Voltage Reverse Current Interterminal Capacitance *1 Quality Factor Capacitance Ratio Matching Tolerance *2 Conditions Ratings min typ V(BR)R IR C2V IR=10μA VR=10V VR=2.0V, f=1MHz C8V VR=8.0V, f=1MHz Q VR=3.0V, f=100MHz 100 CR ΔCm C2.0V / C8.0V 1.65 VR=2.0V, f=1MHz, (Cmax×Cmin) / Cmin×100 Unit max 16 V 50 nA 44.0 46.5 pF 25.1 28.2 pF 1.75 3 % Note) *1 : Capacitance value of one diode *2 : Matching Tolerance is valid for the devices in one taping reel. Ordering Information Device SVC230-TB-E Package Shipping memo CP 3,000pcs./reel Pb Free No.7280-2/6 SVC230 C, Q -- VR 1000 1000 VRF=20mVrms 7 7 5 5 3 2 2 100 100 7 7 Quality Factor, Q Interterminal Capacitance, C -- pF Hz or, Q f=100M Quality fact 3 5 5 Intertermin al capacit ance, C f= 1MHz 3 3 2 2 10 10 0 1 2 3 4 5 6 7 8 9 Reverse Voltage, VR -- V 10 IT04503 C -- Ta 1.04 1.03 V =2 VR 3V 4V 1.02 Capacitance Ratio 6V 8V 1.01 1.00 V V R=8 0.99 0.98 0.97 --75 6V 4V 3V 2V --50 --25 0 25 50 Ambient Temperature, Ta -- °C 75 100 125 150 IT04504 No.7280-3/6 SVC230 Taping Specification SVC230-TB-E No.7280-4/6 SVC230 Outline Drawing SVC230-TB-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.0 0.8 0.95 0.95 No.7280-5/6 SVC230 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7280-6/6