Ordering number : EN4514B 1SV267 PIN Diode http://onsemi.com Dual series PIN Diode for VHF, UHF and AGC 50V, 50mA, rs=typ 2.5Ω, CP Features • • • Series connection of 2 elements in a very smallsized package facilitates high-density mounting and permits 1SV267-applied equipment to be made smaller Small interterminal capacitance (C=0.23pF typ) Small forward series resistance (rs=2.5Ω typ) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Reverse Voltage Conditions Ratings VR IF Forward Current Unit 50 V 50 mA mW Allowable Power Dissipation P 150 Junction Temperature Tj 125 °C Storage Temperature Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7013A-008 • Package : CP • JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB • Minimum Packing Quantity : 3,000 pcs./reel 0.1 1SV267-TB-E Packing Type: TB Marking 1.5 3 2 TB 1 : Anode 2 : Cathode 3 : Cathode / Anode CP 0.3 1.1 0.4 0.05 0.95 KV LOT No. 1 LOT No. 0.5 2.5 0.5 2.9 Electrical Connection 3 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 91212 TKIM/52098HA (KT)/42294YH (KOTO) BX-0222 No.4514-1/6 1SV267 Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Symbol Forward Voltage VR IR VF Interterminal Capacitance C Series Resistance rs Reverse Current Conditions IR=10μA VR=50V Ratings min typ max 50 V 0.1 IF=50mA VR=50V, f=1MHz Unit μA 0.91 V 0.23 pF IF=5mA, f=100MHz 4.0 Ω IF=10mA, f=100MHz 2.5 Ω Note : The specifications shown above are for each individual diode. Ordering Information Device 1SV267-TB-E Package Shipping memo CP 3,000pcs./reel Pb Free No.4514-2/6 1SV267 IF -- VF Interterminal Capacitance, C -- pF 5°C 1.0 7 5 3 2 --55° C 25° C 0.1 7 5 3 2 0.2 0.4 0.6 0.8 1.0 Forward Voltage, VF -- V 1.2 7 5 3 2 2 3 5 7 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V ID00087 IR -- VR 5 Ta=25°C f=1MHz 0.1 0.1 0.01 0 C -- VR 1.0 10 7 5 3 2 Ta= 12 Forward Current, IF -- mA 5 3 2 3 5 7 100 ID00088 rs -- f 5 Ta=25°C 3 3 2 2 °C =75 IF =10μA 10 1k 7 7 5 5 3 3 2 2 Series Resistance, rs -- Ω Reverse Current, IR -- nA Ta C 50° 1.0 7 5 3 2 100 7 5 3 2 1mA 10 0.1 7 7 C 25° 5 5 5mA 3 3 10mA 2 2 0.01 10 0 20 30 40 50 Reverse Voltage, VR -- V 60 ID00089 1.0 1.0 2 3 5 7 10 2 3 5 7 100 2 Frequency, f -- MHz 3 5 7 1000 2 ID00090 rs -- IF 2 Ta=25°C f=100MHz 1k 7 5 Series Resistance, rs -- Ω 100μA 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Forward Current, IF -- mA 2 3 5 7 10 ID00091 No.4514-3/6 1SV267 Embossed Taping Specification 1SV267-TB-E No.4514-4/6 1SV267 Outline Drawing 1SV267-TB-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.0 0.8 0.95 0.95 No.4514-5/6 1SV267 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.4514-6/6