Ordering number : EN8254A SBS811 Schottky Barrier Diode http://onsemi.com 30V, 2A, Low VF, Non-Monolithic Dual VEC8 Common Cathode Applications • High frequency rectification (switching regulators, converters, choppers) Features • • Small Switching noise Low forward voltage (IF=2A, VF max=0.40V) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings Unit VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 30 V 30 V 2.0 A 50Hz sine wave, 1 cycle 10 A Tj --55 to +125 °C Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Product & Package Information unit : mm (typ) 7012-001 • Package : VEC8 • JEITA, JEDEC :• Minimum Packing Quantity : 3,000 pcs./reel 0.3 8 7 0.15 6 5 SBS811-TL-E Packing Type : TL Marking SC 2.3 0.25 2.8 0.25 Package Dimensions 1 2 3 LOT No. TL 4 0.65 0.07 0.75 2.9 1 : Anode1 2 : No Contact 3 : Anode2 4 : No Contact 5 : Cathode2 6 : Cathode2 7 : Cathode1 8 : Cathode1 Electrical Connection 8 7 6 5 1 2 3 4 VEC8 Semiconductor Components Industries, LLC, 2013 September, 2013 91912 TKIM/61005SB MSIM TB-00001372 No.8254-1/6 SBS811 Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current Interterminal Capacitance IR C Reverse Recovery Time trr min IR=2.0mA IF=1.0A typ V 0.30 0.35 0.35 0.40 V 1.25 mA VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. When Mounted in Cu-foiled area of 1.92mm2×0.03mm 75 When mounted on ceramic substrate (1000mm2×0.8mm) V pF 20 on glass epoxy substrate Rth(j-a)2 Unit max 30 IF=2.0A VR=15V Rth(j-a)1 Thermal Resistance Ratings Conditions ns 75 °C / W 70 °C / W trr Test Circuit 50Ω 100Ω 10Ω 10μs 10mA 100mA 100mA Duty≤10% --5V trr Ordering Information Device SBS811-TL-E Shipping memo VEC8 3,000pcs./reel Pb Free IF -- VF 10 7 5 3 2 0.01 0 0.05 0.10 0.15 0.20 0.25 °C Ta=125 0.30 0.35 Forward Voltage, VF -- V 0.40 0.45 0.50 IT08568 100°C 75°C Reverse Current, IR -- mA --25 ° 50 °C 25° C 12 5 10 °C 0° C 75 °C 0.1 7 5 C 1.0 7 5 3 2 IR -- VR 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 7 5 3 2 0.0001 3 2 Ta = Forward Current, IF -- A Package 50°C 25°C --25°C 0 5 10 15 20 25 Reverse Voltage, VR -- V 30 35 IT08569 No.8254-2/6 PF(AV) -- IO 1.2 Rectangular wave (1) 1.0 5 (2) (4) (3) θ 360° 0.8 Sine wave 0.6 180° 360° 0.4 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 0.2 0 0 0.5 1.0 1.5 3 2 100 7 5 3 2.0 Average Forward Current, IO -- A 2.5 IT08571 2 0.1 2 3 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 IT08572 IFSM -- t 14 Surge Forward Current, IFSM(Peak) -- A C -- VR 7 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W SBS811 Current waveform 50Hz sine wave 12 IS 20ms t 10 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00435 No.8254-3/6 SBS811 Taping Specification SBS811-TL-E No.8254-4/6 SBS811 Outline Drawing SBS811-TL-E Land Pattern Example Mass (g) Unit 0.015 mm * For reference Unit: mm 2.8 0.6 0.4 0.65 No.8254-5/6 SBS811 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.8254-6/6