Ordering number : EN6800A SVC236 Varactor Diode http://onsemi.com Monolithic dual Varactor Diode for FM Tuning 16V, 50nA, CR=5.0, Q=70, CP Features • • • • • Low voltage (6.5V) Twin type varactor diode with good large-signal characteristics for FM receiver electronic tuning use Very small package permits SVC236-applied sets to be compact and slim Can be also provieded in tape reel package and automatic insertion is supported High capacitance ratio (VR=1.0 to 6.5V) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Reverse Voltage Junction Temperature VR Tj Storage Temperature Tstg Conditions Ratings Unit 16 V 125 °C --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7013A-006 • Package : CP • JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB • Minimum Packing Quantity : 3,000 pcs./reel 0.1 SVC236-TB-E Packing Type: TB Marking 1.5 3 2 TB 1 : Anode 2 : Anode 3 : Cathode CP 0.3 1.1 0.4 0.05 0.95 ZV LOT No. 1 LOT No. 0.5 2.5 0.5 2.9 Electrical Connection 3 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 72512 TKIM/31901 GIIM TA-3095 No.6800-1/6 SVC236 Electrical Characteristics at Ta=25°C Parameter Symbol Breakdown Voltage Ratings Conditions min Reverse Current V(BR)R IR C1V Interterminal Capacitance * C3.0V VR=1.0V, f=1MHz VR=3.0V, f=1MHz C6.5V VR=6.5V, f=1MHz Quality Factor Q VR=3.0V, f=100MHz 70 Capacitance Ratio CR ΔCm C1.0V / C6.5V 5.0 VR=1.0V, 3.0, 6.5, f=1MHz, (Cmax×Cmin) / Cmin×100 Matching Tolerance Note) * : Capacitance value per each diode. ★ IR=10μA VR=10V typ Unit max 16 ★ V 50 nA 92.07 102.12 pF 35.14 41.98 pF 14.44 16.84 pF 3.0 % : 1MHz signal : 20mVnms Ordering Information Device SVC236-TB-E Package Shipping memo CP 3,000pcs./reel Pb Free C, Q -- VR 1000 1000 VRF=20mVrms 7 7 5 5 3 ctor lity fa 2 ) MHz 100 Q (f= 2 Qua Quality factor, Q Interterminal Capacitance, C -- pF 3 100 100 7 7 5 5 3 3 Interte 2 rmina l capa citanc 2 e C (f =1MH z) 10 10 0 1 2 3 4 5 6 Reverse Voltage, VR -- V 7 8 9 10 IT02779 No.6800-2/6 SVC236 C -- Ta 1.10 f=1MHz VRF=20mVrms V .0 =1 VR 1.08 V 3.0 Capacitance Ratio(%) 1.06 1.04 V 5.0 6.5V 1.02 1.00 0.98 0.96 0.94 --75 --50 --25 0 25 50 75 Ambient Temperature, Ta -- °C 100 125 150 175 IT02800 No.6800-3/6 SVC236 Taping Specification SVC236-TB-E No.6800-4/6 SVC236 Outline Drawing SVC236-TB-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.0 0.8 0.95 0.95 No.6800-5/6 SVC236 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6800-6/6