SVC203C Varactor Diode www.onsemi.com Monolithic dual Varactor Diode for FM Tuning 16V, 50nA, CR=4.6, Q=60 Features • Dual type with a good linearity of C-V characteristic. Excels in large input characteristics • Small-sized package (CP) usable in ultrasmall-sized sets (surface mount type) • Applicable to FM wide band due to high capacitance ratio (VR=1.5 to 9V) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Reverse Voltage VR 16 V Junction Temperature Tj 125 °C Storage Temperature Tstg --55 to +125 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Package Dimensions Product & Package Information unit : mm (typ) 7013A-006 • Package : CP • JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB • Minimum Packing Quantity : 3,000 pcs./reel 0.1 SVC203C-TB-E Packing Type: TB Marking 3 1.5 2.5 0.5 2.9 TB 1 : Anode 2 : Anode 3 : Cathode CP 0.3 LOT No. 0.4 1.1 0.95 2 0.05 0.5 AV 1 Electrical Connection 3 1 2 ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2014 October 2014 - Rev. 2 1 Publication Order Number : SVC203C/D SVC203C Electrical Characteristics at Ta=25°C Parameter Symbol Breakdown Voltage Ratings Conditions V(BR)R IR min typ C1.0V IR=10µA VR=10V VR=1.0V, f=1MHz C6.0V VR=6.0V, f=1MHz C9.0V VR=9.0V, f=1MHz Quality Factor Q VR=3.0V, f=100MHz 60 Capacitance Ratio CR C1.0V / C9.0V 4.6 Reverse Current Interterminal Capacitance* VR=1.0V ∆Cm Matching Tolerance Unit 16 (Cmax -- Cmin) VR=6.0V max Cmin VR=9.0V V 50 nA 58.80 65.98 pF 18.72 25.11 10.84 13.40 pF 6.5 % × 100 pF 5.5 11.8 % % * Capacitance value of one diode Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Address and Capacitance Value (Reference Value) C1.0V Address C6.0V Capacitance (pF) 59.10 11 Address 61 62.92 61.97 12 19.95 19.76 62 65.65 C9.0V Capacitance (pF) 18.91 20.85 20.64 63 Address 91 Capacitance (pF) 10.89 12.17 11.93 92 13.33 21.79 21.57 64 22.77 22.55 65 23.80 23.56 66 24.87 ORDERING INFORMATION Device SVC203C-TB-E Package Shipping memo CP 3,000pcs./reel Pb-Free www.onsemi.com 2 SVC203C C, Q -- VR 5 3 Quality Factor, Q Interterminal Capacitance, C -- pF 2 f= Q( ) Hz M 100 100 f= Q( 7 ) Hz M 180 5 C (f 3 =1M Hz) [On e di 2 10 0 1 2 3 4 5 ode ] 6 7 8 9 10 11 Reverse Voltage, VR -- V ID00114 C -- Ta 1.03 f=1MHz VRF=20mVrms 1.02 V =3 VR 1.01 4V 8V 6V Capacitance Ratio 1.00 0.99 8V VR= 6V 3V 4V 0.98 0.97 0.96 0.95 --30 --20 --10 0 10 20 30 Ambient Temperature, Ta -- °C www.onsemi.com 3 40 50 60 70 80 IT00115 SVC203C Outline Drawing SVC203C-TB-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.0 0.8 0.95 0.95 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 4