UX5040GE01

TM
Application Specific Crystal Oscillator 5.0 x 3.2mm
UX5040GE01
3.3V PECL Ultra Low Jitter 156.25MHz XO
ASSP XO™ for 40Gb Ethernet
5.0 x 3.2mm Ceramic SMD
Package: (Scale: none; dimensions are in mm)
Product Features
Recommended Land Pattern:
•3.3V, 156.25MHz
•Ultra low phase jitter (RMS)- 0.2ps max.
(10kHz ~ 1MHz)
•Pb-free & RoHS compliant
•Industrial temperature range
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Product Description
The UX5040GE01 is a crystal oscillator
that achieves superb low jitter for 40GbE
applications. The output clock signal,
generated internally with a patented
oscillator design, is compatible with LVPECL
logic levels. The device, available on tape
and reel, is contained in a 5.0 x 3.2mm
surface-mount ceramic package.
Pin Functions:
Pin
Function
1
OE
2
NC
3
V EE
4
Q Output
Applications
5
Q Output
•40 Gigabit Ethernet Swithes / Routers
6
VCC
•40 Gigabit Ethernet Data Center
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
Part Ordering Information:
UX5040GE01
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com
12-0047
All specifications are subject to change without notice.
UX5040GE01
Rev A
07/06/12 1
UX5040GE01
3.3V PECL Ultra Low Jitter 156.25 MHz 40GbE XO
TM
Application Specific Crystal Oscillator 5.0 x 3.2mm
Electrical Performance
Parameter
Min.
Output Frequency
Typ.
Max.
156.25
Supply Voltage
2.97
60
Supply Current, Output Disabled
Frequency Stability
Operating Temperature Range
Output Logic 0, VOL
3.63
V
75
mA
25
mA
±50
ppm
See Note 1 below
+85
°C
Industrial
VCC – 1.620
V
0 to +85°C
VCC – 1.555
V
-40
Output Logic 1, VOH
Notes
MHz
3.30
Supply Current, Output Enabled
Units
-40 to 0°C
VCC – 1.025
V
0 to +85°C
VCC – 1.085
V
-40 to +0°C
Output Load
output requires termination
50Ω to VCC – 2V
Duty Cycle
45
Rise and Fall Time
Jitter, Phase RMS (1-σ)
Jitter, pk–pk
55
%
Measured 50% V DD
0.5
0.85
ns
Measured 20/80% of waveform
0.2
0.3
0.1
0.2
25
40
12 kHz to 20 MHz frequency band
ps
10 kHz to 1 MHz frequency band
ps
100,000 random periods
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (5 year at 40°C average effective ambient temperature), shock and vibration.
2. For specifications othere than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Min.
Input Voltage (pin 1), Output Enable
Typ.
Max.
Units
2.2
Input Voltage (pin 1), Output Disable (low power standby)
Internal Pullup Resistance
0.8
50
Notes
V
or open
V
Outputs disabled to Hi-Z
kΩ
Output Disable Delay
200
ns
Output Enable Delay
10
ms
Absolute Maximum Ratings
Parameter
Min.
Storage Temperature
Typ.
-55
Max.
Units
+125
°C
Notes
For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/assp-xo/?part=UX5040GE01
For test circuit go to: http://www.pericom.com/assets/sre/tc_pecl.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/assets/sre/reflow.pdf
For typical phase noise go to: http://www.pericom.com/assets/sre/pn_UX5040GE01.pdf
For tape and reel information go to: http://www.pericom.com/assets/sre/tr_5032_xo.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com
12-0047
All specifications are subject to change without notice.
UX5040GE01
Rev A
07/06/12 2