ASSP VCXO Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm YNETHE125 3.3V CMOS 125.000MHz Ethernet VCXO ASSP VCXO™ 7.0 x 5.0mm Ceramic SMD for Ethernet Package: (Scale: none, Dimensions are in mm) Product Features Recommended Land Pattern: • Very low Pk to Pk jitter - 40ps Max • Low supply current - 20mA Max • Low power standby mode • RoHS Compliant Product Description CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. This is an enhanced 3.3V, 25.000MHz with superb jitter and low operating current for providing clock references in Ethernet applications. Pin Functions: Applications • Ethernet Pin Function 1 Control Voltage 2 Enable/Disable 3 Ground 4 Output 5 N/C 6 V DD CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: YNETHE125 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 12-0054 All specifications are subject to change without notice. YNETHE125 Rev B 07/13/12 1 3.3V CMOS 125.000 MHz Ethernet VCXO YNETHE125 ASSP VCXO Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency Typ. Max. Units 125.000 Supply Voltage V DD 3.135 3.3 3.465 V Supply Current, Output Enabled 20 mA Frequency Stability ±50 ppm +85 °C 10% V DD V Operating Temperature Range -40 Output Logic 0, VOL 90% V DD Output Logic 1, VOH Notes MHz See Note 1 below V Output Load 15 pF 55 % Measured 50% V DD 5 ns Measured 20/80% of waveform Jitter, Phase RMS(1-s) 1 ps 12kHz~20 MHz Frequency Band Jitter, Peak to Peak (Pk-Pk) 40 ps 100.000 Random Periods Duty Cycle 45 Rise and Fall Time Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (10 years at +40°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Voltage Control Function Parameter Min. Absolute Pull Range (APR) ±50 Control Voltage Range 0.3 Typ. Max. Units ppm Notes See 1 below 3.0 V As rated V For RMT Nominal Frequency 10 % Positive Transfer Slope Input Impedance 130 Notes: 1. APR is relative to the nominal output frequency; APR is inclusive of frequency deviation due to stability. kΩ Control Voltage Pin Center Control Voltage 1.65 Monotonic Linearity Output Enable / Disable Function Parameter Min. Input Voltage (pin 2), Output Enable Typ. Max. 3.0 Input Voltage (pin 2), Output Disable (low power standby) 0.3 Units Notes V or open V Output is Hi-Z Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/assp-xo/?part=YNETHE125 For test circuit go to: http://www.pericom.com/pdf/sre/tc_vc6cmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 12-0054 All specifications are subject to change without notice. YNETHE125 Rev B 07/13/12 2